General Category > Equipment and Software
BrewSmith fly sparge question
imperialstout:
I see this section is equipment and software but mostly see equipment questions here.
My question is how to select fly sparge in BrewSmith Mash/ sparge section.
Have been double batch sparging but efficiency is rarely above 60%. Bought a grain mill and crush at .039. Want to do fly sparging to increase the efficiency.
Looked for fly sparge in mash type list but didn't find it. What else would it be called?
Currently use Ale, Double Infusion for mash. Under mash detail tab the sparge is listed as batch sparge with 1 step.
What else would fly sparge be called? If I accidently deleted fly sparging how do I get it back?
morticaixavier:
I don't know that fly sparging will necesarily increase your efficiency. I generally get ~75% batch sparging and I don't even usually 'sparge' perse. I mash pretty thin ~2 qt/lb and step the temp up to mash out range before running off and still git 73%
I would look in other areas (Specifically mash pH) before assuming it's the batch sparge
denny:
I batch sparge and average 83-85% efficiency. If you want to increase your efficiency, the crush is the first place to look.
Titanium Brewing:
If I remember correctly, all the default mash profiles are fly sparge, unless it actually says batch sparge.
imperialstout:
Just found fly sparging is single infusion, full body. Didn't discover that until I chose single infusion and look at the mash tab. Under the mash step list it says to fly sparge with the gallons and temp for the brew. brew Smith is great software but has many bugs that don't seem to get fixed.
I brew big beers typically with 17 to 23 pounds grain. Read on another web site a brewers efficiency starts to drop around 17 pounds grain, otherwise he gets 75% fly sparging. Has anyone else experienced lower inefficiencies with large grain bills?
Currently mash for 60 min and batch sparge for 30. Will try mashing for 60, fly sparge for 30 and check pH. What effect does pH have on efficiency? How do you control for it? What should a good pH be?
If fly sparging does not increase efficiency will mash for 90 and batch sparge for 45.
Navigation
[0] Message Index
[#] Next page
Go to full version