Yak & Yeti’s Chai Milk Stout Clone

ABV: 5.70%

IBU: 31

SRM: 43

OG: 1.067 (16.4 °P)

FG: 1.024 (6.1 °P)

Link to article
clone Chai

The following beer recipe is featured in the May/June 2013 issue of Zymurgy magazine. Access this issue along with the archives with Zymurgy Online!

This homebrew version of Yak and Yeti's Chai Milk Stout comes from the May/June 2013 issue of Zymurgy magazine. This recipe also won silver for Herb and Spice Beer at the 2013 Great American Beer Festival.

Brewer Chris Kennedy says, "The milk stout base is very milky and chocolatey, and you want to let those characteristics shine through just as strongly as the chai spice. I like to drink the chai stout and not be entirely sure whether the flavors are coming from the chai spices or the milk stout base."

Editor's note: The brewery is now called Spice Trade Brewing and is a stand alone brewery brewing out of Yak & Yeti restaurant in Arvada, CO.

Loading...

Brewed 6 times

The following beer recipe is featured in the May/June 2013 issue of Zymurgy magazine. Access this issue along with the archives with Zymurgy Online!

This homebrew version of Yak and Yeti's Chai Milk Stout comes from the May/June 2013 issue of Zymurgy magazine. This recipe also won silver for Herb and Spice Beer at the 2013 Great American Beer Festival.

Brewer Chris Kennedy says, "The milk stout base is very milky and chocolatey, and you want to let those characteristics shine through just as strongly as the chai spice. I like to drink the chai stout and not be entirely sure whether the flavors are coming from the chai spices or the milk stout base."

Editor's note: The brewery is now called Spice Trade Brewing and is a stand alone brewery brewing out of Yak & Yeti restaurant in Arvada, CO.

Ingredients:

  • 8.8 lb (4kg) Pale Ale Malt
  • 1.1 lb (500g) Crisp Crystal 80°L
  • 7.0 oz (200g) Crisp Roasted Barley
  • 7.0 oz (200g) Crisp Chocolate Malt
  • 7.0 oz (200g) Crisp Pale Chocolate Malt
  • 0.4 oz (12g) Warrior United States Pellet, 16.0% Alpha Acid (60 min.)
  • 16.0 oz (450 g) Lactose (15 min)
  • Wyeast 1728 Scottish Ale  71.0%  55°F - 75°F

Specifications:

Yield: 5 gallons (18.9L)

Original Gravity: 1.067 (16.4 °P)

Final Gravity: 1.024 (6.1 °P)

ABV: 5.70%

IBU: 31

SRM: 43

Boil Time: 90 minutes

Directions:

  • Mill the grains and dough-in, targeting a mash of around 1.5 quarts of water to 1 pound of grain (a liquor-to-grist ratio of about 3:1 by weight) and a temperature of 151°F (66°C). Hold the mash at 151°F (66°C) until enzymatic conversion is complete. Infuse the mash with near boiling water while stirring, or with a recirculating mash system, raise the temperature to mash out at 168°F (76°C). Sparge slowly with 170°F (77°C) water, collecting wort until the pre-boil kettle volume is around 6.5 gallons (24.6 L) and the gravity is 1.052 (12.9°P).
  • The total wort boil time is 90 minutes. Add the bittering hops with 60 minutes remaining in the boil. Add lactose and Irish moss or other kettle finings with 15 minutes left. Chill the wort to 68°F (20°C) and aerate thoroughly. Use 2 packages of liquid yeast or 1 package of liquid yeast in a 2.5 liter starter.
  • Ferment at 68°F (20°C) until the yeast drops clear. With healthy yeast, fermentation should be complete in a week or less. Allow the lees to settle and the brew to mature without pressure for another two days after fermentation appears finished. At this point you have an excellent milk stout. To make the chai milk stout you will need to add a tincture of chai spices.
  • Chris explains, “For the chai spice, I simply take a cheap vodka and soak our house chai spice mixture in it, then add small doses to a keg until it tastes right. I try to make a very strong spice tincture so there is only a negligible amount of vodka added to the beer. Usually it only takes 0.4 oz of tincture to spice 5 gallons of beer. Frankly, I am not certain what is in our chai spice mixture, but I am sure your favorite chai spice mix will work great. Make additions slowly and taste as you go so you can hit it just right.”

Extract Version

Substitute 6.5 lbs (2.9 kg) English liquid malt extract for the pale ale malt. Steep other grains for 30 minutes in 158°F (70°C) water, drain add liquid extract, bring to a boil and proceed with recipe as stated.


Join for Less Than a Pint

Subscribe for only $4.99/month

Members get discounts on beer, food, and merchandise, plus a subscription to Zymurgy magazine online, and unlimited access to medal-winning and clone recipes for just $4.99 a month.

Let’s Brew This