Homebrewers Association | AHA Forum

General Category => Yeast and Fermentation => Topic started by: James K on June 17, 2018, 03:57:22 PM

Title: Imperial napoleon
Post by: James K on June 17, 2018, 03:57:22 PM
I made a beer with this strain Friday. Pitched at 74.5* and the temp rose to 76* on its own. Fermentation took off like a rocket and is slowing down already, I put a half# of Candi sugar in yesterday during high flocculation.  The current temp is 72.3* and the beer is still chugging along with a lot less flocculation.
If this strain is like 3711 should I raise the temp to ensure that the beer finishes? The temp threshold says 65-78*.
I was thinking of raising the temp to 80 over the next few days, is this a no no? I have cranked up 3711 to 85 before.
Title: Re: Imperial napoleon
Post by: denny on June 17, 2018, 04:10:05 PM
Try open fermentation.
Title: Re: Imperial napoleon
Post by: James K on June 17, 2018, 04:24:52 PM
Try open fermentation.
Just empty the airlock and keep it going ?
Title: Re: Imperial napoleon
Post by: jeffy on June 17, 2018, 04:33:41 PM
I made a beer with this strain Friday. Pitched at 74.5* and the temp rose to 76* on its own. Fermentation took off like a rocket and is slowing down already, I put a half# of Candi sugar in yesterday during high flocculation.  The current temp is 72.3* and the beer is still chugging along with a lot less flocculation.
If this strain is like 3711 should I raise the temp to ensure that the beer finishes? The temp threshold says 65-78*.
I was thinking of raising the temp to 80 over the next few days, is this a no no? I have cranked up 3711 to 85 before.
I don’t know about this yeast, but you may be using the word “flocculation” when you really mean “kraeusen.”
Title: Re: Imperial napoleon
Post by: James K on June 17, 2018, 05:11:40 PM
I made a beer with this strain Friday. Pitched at 74.5* and the temp rose to 76* on its own. Fermentation took off like a rocket and is slowing down already, I put a half# of Candi sugar in yesterday during high flocculation.  The current temp is 72.3* and the beer is still chugging along with a lot less flocculation.
If this strain is like 3711 should I raise the temp to ensure that the beer finishes? The temp threshold says 65-78*.
I was thinking of raising the temp to 80 over the next few days, is this a no no? I have cranked up 3711 to 85 before.
I don’t know about this yeast, but you may be using the word “flocculation” when you really mean “kraeusen.”

No I’m not. The yeast is flocculating in the carboy, moving randomly. The Kraeusen formed, some blew off, it receded and I poured in more candi sugar when the yeast was still very actively flocculating in the carboy. The yeast is falling out of suspension now.
Title: Re: Imperial napoleon
Post by: jeffy on June 17, 2018, 05:37:26 PM
I made a beer with this strain Friday. Pitched at 74.5* and the temp rose to 76* on its own. Fermentation took off like a rocket and is slowing down already, I put a half# of Candi sugar in yesterday during high flocculation.  The current temp is 72.3* and the beer is still chugging along with a lot less flocculation.
If this strain is like 3711 should I raise the temp to ensure that the beer finishes? The temp threshold says 65-78*.
I was thinking of raising the temp to 80 over the next few days, is this a no no? I have cranked up 3711 to 85 before.
I don’t know about this yeast, but you may be using the word “flocculation” when you really mean “kraeusen.”

No I’m not. The yeast is flocculating in the carboy, moving randomly. The Kraeusen formed, some blew off, it receded and I poured in more candi sugar when the yeast was still very actively flocculating in the carboy. The yeast is falling out of suspension now.
No offense really, but “falling out of suspension” is another phrase that means flocculation.  The part you refer to as flocculating is just active fermentation.  Another synonym would be sedimentation, the act of clumping together and dropping to the bottom.
Back to the issue at hand, have you checked the gravity yet?
Title: Re: Imperial napoleon
Post by: James K on June 17, 2018, 05:50:43 PM
I made a beer with this strain Friday. Pitched at 74.5* and the temp rose to 76* on its own. Fermentation took off like a rocket and is slowing down already, I put a half# of Candi sugar in yesterday during high flocculation.  The current temp is 72.3* and the beer is still chugging along with a lot less flocculation.
If this strain is like 3711 should I raise the temp to ensure that the beer finishes? The temp threshold says 65-78*.
I was thinking of raising the temp to 80 over the next few days, is this a no no? I have cranked up 3711 to 85 before.
I don’t know about this yeast, but you may be using the word “flocculation” when you really mean “kraeusen.”

No I’m not. The yeast is flocculating in the carboy, moving randomly. The Kraeusen formed, some blew off, it receded and I poured in more candi sugar when the yeast was still very actively flocculating in the carboy. The yeast is falling out of suspension now.
No offense really, but “falling out of suspension” is another phrase that means flocculation.  The part you refer to as flocculating is just active fermentation.  Another synonym would be sedimentation, the act of clumping together and dropping to the bottom.
Back to the issue at hand, have you checked the gravity yet?

No i haven’t checked gravity. It’s still active just not as active. That’s why I was curious about raising the temp the way i have with 3711.