Homebrewers Association | AHA Forum

General Category => Pimp My System => Topic started by: joe_meadmaker on July 24, 2019, 06:24:06 PM

Title: Another keezer
Post by: joe_meadmaker on July 24, 2019, 06:24:06 PM
There have been some really nice keezers posted in the last couple months.  I figured I would post some shots of mine.  I've had it for a couple years.  Although fairly recently I added a secondary regulator and a third tap.  The freezer isn't very big so it's pretty much maxed out at this point.  But I do love having the third faucet.

Currently pouring peach mead, imperial stout, and the little bit that's left of my Burton ale.

(http://beehatmead.com/wp-content/uploads/2019/07/Keezer.jpg)

(http://beehatmead.com/wp-content/uploads/2019/07/KeezerInside.jpg)
Title: Re: Another keezer
Post by: KellerBrauer on July 27, 2019, 11:39:09 AM
Beautiful!  I assume you built it?  Very nice work indeed!
Title: Re: Another keezer
Post by: hopfenundmalz on July 27, 2019, 12:27:50 PM
Very nice!
Title: Re: Another keezer
Post by: joe_meadmaker on July 29, 2019, 09:28:00 PM
Thanks!

@KellerBrauer - Yep.  I got the freezer from a friend for about $40.  It needed a bit of cleanup and a paint job, but came out pretty good.  It was funny the first time he saw it.  He didn't believe it was the same freezer.
Title: Re: Another keezer
Post by: BrewBama on July 29, 2019, 10:04:57 PM
Heck yeah. $40 beauty!


Sent from my iPad using Tapatalk
Title: Re: Another keezer
Post by: Robert on July 29, 2019, 10:13:47 PM
Finishing the wood on the inside is really above and beyond!  She's a beaut!
Title: Re: Another keezer
Post by: imabrewer on September 13, 2019, 08:35:03 PM
This is a sweet setup. Thanks for posting. I only have a one faucet freezer right now, but it works. I really like the wood finish. I think I will take mine apart and do this after I drain the current keg.
Title: Re: Another keezer
Post by: 65BAJA on September 16, 2019, 03:05:23 AM
What size freezer is it? Can you fit 4 cornys?
Title: Re: Another keezer
Post by: joe_meadmaker on September 16, 2019, 05:51:26 PM
Thanks everyone!

This is a sweet setup. Thanks for posting. I only have a one faucet freezer right now, but it works. I really like the wood finish. I think I will take mine apart and do this after I drain the current keg.
It's a little work, but I love the wooden collar.  You also then have the option to easily punch holes in it wherever you need.

What size freezer is it? Can you fit 4 cornys?
If you're asking about cubic feet, I'm not sure.  I'm happy to take some measurements of the inside if you would like to know.  Unfortunately I can't get another keg in it.  If you look at the right hand side under the regulator, it has the little shelf in the back.  And a keg is too tall to fit there.  And the area in front of that shelf is too narrow.  So that's where I put the CO2 tank.

If I had a really short or narrow keg, I might get it in, but I think this keezer will just stay as it is.  I have a little mini fridge that I got from a neighbor who moved away, and I think I want to use that to build a nitro tap system.  Not sure yet, possibly a project for next year.