Homebrewers Association | AHA Forum

General Category => Pimp My System => Topic started by: Raygar on January 02, 2020, 08:16:15 AM

Title: Keezer Build For Christmas
Post by: Raygar on January 02, 2020, 08:16:15 AM
Hi! I'm fairly new to the forums and wanted to share. I had some time off for the holidays, so I built a keezer!

I built a pine frame with a plywood base on wheels, used wood charring accelerator stain and lacquered finish. I saw the tower design at a local restaurant and copied the concept. This can hold 4 corny kegs and I use an inkbird for temp control.

Overall, I think it turned out pretty good!

(https://lh3.googleusercontent.com/pw/ACtC-3cBS7tKl-4z2tSSROf8UyLVkvmwXETPHxMaYviVlY4KYurKTNzDS4YcPlTd593DDZsR0JbhFLFxLZfCtByspu2o3qB04G7OUPdOaVKfJGADa753oYMadY9AuJdqUoGDe_cezjEqhOm0xQJrqc4mHOPl=w960-h913-no?authuser=0)
(https://lh3.googleusercontent.com/pw/ACtC-3c-zfbOxryi4o_6PACF0FiinMOpFeK8bE8o8822tKl2jS-1aFh-BYxACNfQ7AL_rBFe_Pf4J4RUbygQs2stOSr1RUe57dlnDTSZtOI5rgr1HxKFSO8cCrRukIwG3z-qdhRCMgBbsODMF3ydlYdsgJe_=w720-h960-no?authuser=0)
(https://lh3.googleusercontent.com/pw/ACtC-3dge3BQ0hzZgYqhrzdBeIFs_4QxC3Dqwp98UIrh9qGV42sPjAs03TW3ahJo7Xww20K_6hJ0v96Jkg34wHg0GVyeKVGTmfVZWIWQ62f4UV2Ib4oupWe43AmuVDX3NCdt58zWjFDetm2s55YlHX_zoB0z=w504-h847-no?authuser=0)
(https://lh3.googleusercontent.com/pw/ACtC-3fnVzL8BTDN1ydiu0lfurunoaMwRr4C9DN-UxXK-bKdefKRXiieRSvj0gI9N9Lzs5IJdYEGJ9GPU5sRQnqsNSFYd5XdYUMwlgBEqtXDtLjoNEP5tICHTTKo4F5zMoXM8buR8mRYExgvt7BEWhDI0_nM=w960-h720-no?authuser=0)
(https://lh3.googleusercontent.com/pw/ACtC-3dqynqCeDuDwGE-vjJ_foSugMO6j0NiGzUQmtRni_gMbHz9mAqotd3nlt4_Wev7YWNKo2ThRjRHb_FEXv1AgL6tExZrLZK_f4aQHeAn7BjtuA2SZ8yX9MExSXVvvHv0bQpn6GLtXKTDLUPDrHnrrHZe=w849-h601-no?authuser=0)
(https://lh3.googleusercontent.com/pw/ACtC-3dMrSnljqWooZFfKBKiDVLirFBexc-A09W-ckWCfXsJc-8JLMBSAGJZCs7GbMcaOk4v7MPiNJTBr-Mf1kDD9pZpkM4wyAdOo8bXBOA3OB3RrQeC17NV_l6YbqwFHA6qtJJmq-Vl1YzmEz1TvsNMu3Bq=w914-h960-no?authuser=0)
(https://lh3.googleusercontent.com/pw/ACtC-3fgHG07DVbV6En01K7fVp4p7kiUec2rNUI1NyYO_QcAFmHrvbyaGmAifdcgm7P_ggxkB24s8XOaEWnLgwN5f-6H_PVbNV6a8PQxAkqhMZ5pgkROjTY-xDqpFwzcCrmO0XJJEmcFfOwf5MdFVlHuzCS4=w1440-h1080-no?authuser=0)
Title: Re: Keezer Build For Christmas
Post by: dannyjed on January 02, 2020, 12:33:44 PM
Very nice! It looks like a work of art.
Title: Re: Keezer Build For Christmas
Post by: KellerBrauer on January 02, 2020, 12:56:41 PM
Beautiful work indeed!  Do you access the kegs from the rear?  If not, you did a great job hiding the access door.  Nice work!
Title: Re: Keezer Build For Christmas
Post by: joe_meadmaker on January 02, 2020, 01:19:44 PM
Bravo Raygar!  That looks great!
Title: Re: Keezer Build For Christmas
Post by: hopfenundmalz on January 02, 2020, 02:49:59 PM
All I can say is Wow!
Title: Re: Keezer Build For Christmas
Post by: Raygar on January 02, 2020, 06:28:21 PM
thanks for the feedback!

@KellerBrauer, This is a top loading keezer. Due to the weight of the tower, I built the back of frame to support opening the top fully without falling over.
Title: Re: Keezer Build For Christmas
Post by: WDE97 on January 02, 2020, 11:16:28 PM
Great job! Love the "charred" look and the industrial pipe look! I'm impressed you were able to support that lid as a top loader.
Title: Re: Keezer Build For Christmas
Post by: Steven Madsen on February 06, 2020, 11:48:32 PM
only one word needed...……..DOPE!!!!!!!  Nailed it bro.  Keep brewing!
Title: Re: Keezer Build For Christmas
Post by: BaseWerks Brewing on March 04, 2020, 07:07:06 PM
Awesome!