Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - duboman

Pages: [1] 2 3 ... 5
Beer Recipes / Jack fruit ale
« on: May 04, 2016, 05:40:31 PM »
Anybody ever brew a beer with Jack Fruit from Asia?

Neighbor got one and while a huge PITA to get the meat it tastes like a blend of pineapple, mango and banana, not sweet and kind of dense.

Thinking a session ale with a secondary, with aroma flavor hops that emulate similar flavors for dry hop and late additions.

Sent from my SAMSUNG-SM-G920A using Tapatalk

Kegging and Bottling / Tinny tasting beer
« on: March 13, 2016, 08:58:13 AM »
I have a 4 tap kegerator now going on 3 years. About a month or so ago I tapped 4 new kegs of beer and swapped out my empty 20lb tank with a fresh one. Now y beer has a tinny taste to it and the only thing I can point to is the possibility I got a bad tank of co2?

I've been using the same supplier for all the years, local welding supply that only charges me $30 a swap, this is the first time I've ever had a problem.

All the lines were properly cleaned as well as the tapa, etc. When I did the latest refill on the kegs as well as all the kegs.

I'm assuming even if I degas all the kegs and swap with my other tank the off flavor won't go away and I'll have to dump almost 20gal of beer, major league disappointment!

Anyone ever have this issue with co2 causing this problem? Kind of bummed:(

Sent from my SAMSUNG-SM-G920A using Tapatalk

Classifieds / 2-tier AG setup for sale
« on: November 15, 2015, 08:42:44 AM »
Since I upgraded my system I am selling my 2-tier set up, here is the link I posted on CL, thanks for looking! The system has served me well. Interested, Let me know.


Classifieds / U-Line Kegerator For Sale
« on: November 15, 2015, 08:34:17 AM »
Hey all,
Just posted this on Craig's List, located in Glenview Il for local pick up, any questions, let me know and thanks for looking.


Equipment and Software / Single tier system input
« on: September 01, 2015, 03:40:23 PM »
I've been absent, pretty busy....
Anyway, exploring single tier systems and found Ruby Street and Synergy brewing to be in my price point.

Synergy system offers 2 pumps and few other bells and whistles, both are comparably and competitively priced.

Wondering if anyone out there has either and can offer some insight on product quality and support?

Before you ask, building from scratch is not an option for me although I may part out kettles, chillers and such as I investigate.

Appreciate any insight!

Sent from my SAMSUNG-SM-G920A using Tapatalk

All Grain Brewing / Might have a problem
« on: May 27, 2015, 04:53:35 PM »
So I brewed my gose, as a recap, I mash, sparge and boil 15 minutes, no hops. Pitch lacto and hold at 90 until pH drops to 3.8-4.0 and then follow with traditional boil, hops, etc. Once done, cool to 60 and pitch proper starter of WY 1007 to ferment at 60. Every time fermentation takes off in about 12-24 hours with no issues.

This time around I am at 72+ hours, got nothing, no krausen. I did take the primary out of the chamber to let it warm a bit but am concerned there's nothing going on.

Any advice on this since the pH is on the threshold of proper fermentation, what else could I pitch to get things going? I've never had this problem. I'm not panicking yet as it might still take off once warmed up but looking for ideas.....

Kegging and Bottling / Tap spits foam
« on: March 24, 2015, 09:00:51 AM »
Got an issue I need help figuring out. Recently tapped a Pilsner that that was lagering for about 4 weeks on co2 at 33oF. Each time I pull a pint I get s spitting tap with a foamy pour for a few pints. I have noticed there appears to be co2 out of solution in the lines. My kegerator is set at 38oF, I have 10' 3/16" Bev lines. It is a 4 tap set up, 3 of which on are a manifold tied to it's own regulator set at 10psi. All other kegs pour perfectly fine and this keg has held beer and been tapped before with no issues and I have no leaks anywhere in the system.

This is the first lagered beer on co2 I have ever tapped though. It was on co2 at the same 10 psi as the kegerator is set to. My thought is my issue has to do with the temperature difference from lagering to going in the kegerator and the amount of co2 absorbed at the lower temp of lagering vs the temp of the kegerator, perhaps slightly over carbonated and now the co2 is coming out of suspension?

Am I on the right track and if so what is the best way to alleviate the issue or just live with it and learn for the next time?

Equipment and Software / Synec
« on: February 13, 2015, 07:35:53 AM »

Anybody seen this, seems like a pretty nifty appliance but I haven't seen a price for it

Beer Recipes / ESB Critique
« on: January 10, 2015, 10:03:59 AM »
I put together this ESB recipe awhile back but looking to revise. (This is the revised showing MO in lieu of Pale Malt) and was looking for some additional input. My main question is should I sub out some crystal malt and add in some Munich/Vienna for a bit more bready/bisquity flavor profile. I think this would accentuate the beer a bit more but am not sure. I am revising a recipe that was originally Pale Malt instead of MO. The judging notes stated that while the beer was good (Scored a 35) it was a bit bland for style and could be improved with a bit more bread/biscuit  in the profile. Also not sure the Special roast still needs to be there either? I am looking for a nice bitter that I can put in regular rotation as it is a favorite style of mine.

Recipe: EnglishSpecial Bitter   TYPE: All Grain
Style: English Best Bitter
---RECIPE SPECIFICATIONS-----------------------------------------------
SRM: 12.0 SRM      SRM RANGE: 5.0-16.0 SRM
IBU: 38.0 IBUs Tinseth   IBU RANGE: 25.0-40.0 IBUs
OG: 1.048 SG      OG RANGE: 1.040-1.049 SG
FG: 1.012 SG      FG RANGE: 1.008-1.012 SG
BU:GU: 0.798      Calories: 155.0 kcal/12oz   Est ABV: 4.6 %      
EE%: 80.00 %   Batch: 6.25 gal      Boil: 8.97 gal   BT: 60 Mins


Total Grain Weight: 10 lbs   Total Hops: 4.75 oz oz.
---MASH/STEEP PROCESS------MASH PH:5.40 ------
Amt                   Name                                     Type          #        %/IBU         
8 lbs                 Pale Malt, Maris Otter (Thomas Fawcett)  Grain         1        80.0 %       
12.0 oz               Caramel/Crystal Malt - 60L (60.0 SRM)    Grain         2        7.5 %         
8.0 oz                Aromatic Malt (Briess) (20.0 SRM)        Grain         3        5.0 %         
8.0 oz                Caramel/Crystal Malt -120L (120.0 SRM)   Grain         4        5.0 %         
4.0 oz                Special Roast (50.0 SRM)                 Grain         5        2.5 %         

Name              Description                             Step Temperat Step Time     
Mash In           Add 3.75 gal of water at 164.0 F        154.0 F       60 min       

Batch sparge with 2 steps (1.93gal, 4.48gal) of 168.0 F water

---BOIL PROCESS-----------------------------
Est Pre_Boil Gravity: 1.038 SG   Est OG: 1.048 SG
Amt                   Name                                     Type          #        %/IBU         
2.25 oz               Goldings, East Kent [5.00 %] - Boil 60.0 Hop           6        32.6 IBUs     
0.31 tsp              Irish Moss (Boil 10.0 mins)              Fining        7        -             
0.75 oz               Goldings, East Kent [5.00 %] - Boil 10.0 Hop           8        3.9 IBUs     
0.50 oz               Goldings, East Kent [5.00 %] - Boil 5.0  Hop           9        1.4 IBUs     
0.50 oz               Goldings, East Kent [5.00 %] - Boil 0.0  Hop           10       0.0 IBUs     

Appreciate the thoughts!


Equipment and Software / Stc1000 issue
« on: January 08, 2015, 08:42:57 AM »
So I built the stc1000 for my term chamber as per several you tube builds, verified all wiring, etc. I only have the outlet for cooling plugged in and when the temp is above pre-set everything kicks on fine. My issue is if the temp goes below are set the unit switches to heat but activates the cooling outlet and the compressor kicks on and chills.

Do I need to have a heat source plugged in as well or is something not right. I thought without having a heat source plugged in the unit would simply sit idle


The Pub / Congrats to Ray!
« on: January 08, 2015, 07:41:42 AM »

Chicago Tribune dining award for Cicerone!

Ingredients / Malt: 'DON' and gushers
« on: January 07, 2015, 08:42:24 AM »
Finally started getting into the book 'Malt' and am finding it pretty interesting. In learning about malt and specifically 'DON', a potential disease listed as mycotoxin deoxynivalenol on page 134, the author states that beers brewed with grain that has elevated levels of DON are very susceptible to spontaneous gushing when opening a bottle. This leads to my question:

I have brewed and bottled many beers over the years with proper practices of sanitation, measuring priming sugars, etc with great success, never an infection or any over carbonation issues but one: A Northern German Altbier. Every bottle that was opened experienced spontaneous gushing that I have never been able to figure out.

I purchase my grains from the same LHBS for all beer and I know their supplies are consistent as I am friends with the owner. I am thinking that perhaps a batch of grain had elevated levels of DON that were used in this batch. I have not re-brewed this beer yet so I have no basis of comparison but never have I had this problem with any other beer I've brewed with ingredients coming from the same sources.

I was hoping perhaps someone could shed some light on this, had similar unexplained experiences or new how to get in touch with Mallett to pose the question. I am also wondering if there is a way to predetermine this factor when selecting grains. In reading COAs I have never seen this factor. Knowing also that the DON issue stems from fusarium diseases I'm curious to know how this information is provided to the malt houses or end users.

Curious to know if anyone else has ever experienced this with no known answer as to why it occurred.

Rallies / Lagunitas Chicago anyone
« on: September 13, 2014, 09:09:26 AM »
RSVP'd to the rally on 10/19, anyone going, put a forum name to a face?

Zymurgy / Project Dank Recipe
« on: June 28, 2014, 09:47:19 AM »
I was reading the latest Zymurgy and was perusing the above recipe.

In the directions it states to whirlpool settle for 1 hour-covered?

I'm not questioning the hour but the covered part. Is there not a concern of DMS redeveloping over this time? Especially with 12.8lbs of Pils malt?

Kegging and Bottling / Took a small shower...
« on: June 21, 2014, 12:38:48 PM »
Had a very productive day today as I brewed my Wheach for the summer and kegged up a new pale ale that I added 3oz of Nelson to the keg to dry hop.

Reminder to self: be sure liquid post poppet is properly seated prior to purging keg and sealing lid! Yup, took it full on in the face, now cleaning up the brewery and kegerator:(

The wife is still hysterically laughing.....

Pages: [1] 2 3 ... 5