Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - AleForce

Pages: [1] 2 3 ... 6
Equipment and Software / Re: Blichmann Pump
« on: May 24, 2017, 06:03:29 PM »
Wish they came out with a pump head with TC outputs also.

It's not that difficult to add a FPT to TC adapter.
Yeah I know. I have TC fittings on my chugger pumps.

Equipment and Software / Re: Blichmann Pump
« on: May 24, 2017, 02:59:14 PM »
There is a nice YouTube video comparing the March, Chugger, and Riptide.
After watching that video I decided to purchase one from Great Fermentations to replace my SS Chugger pump. Wish they came out with a pump head with TC outputs also.

General Homebrew Discussion / Re: Brewing Beer Magazine
« on: December 19, 2014, 04:03:35 PM »
Someone emailed about what was in the magazine. Here's the Table of Contents..

General Homebrew Discussion / Re: Brewing Beer Magazine
« on: December 16, 2014, 12:27:51 PM »
I started out many years ago after seeing a friend brew beer, and he recommended "The Joy of Homebrewing" book which I read a few times. The thing that I liked about this magazine was that is was up to date, concise, lots of photos and they made it look fun to brew. The way that "Hobby Farms" presented it they also display other avenues that the homebrewer could take the hobby with different ingredients and evening incorporating baking/cooking.  They also supplied references to places like the AHA and other resources for continued research. 

General Homebrew Discussion / Re: Brewing Beer Magazine
« on: December 15, 2014, 11:53:49 PM »
They publish a lot of different magazines. This one is a special on brewing beer, it doesn't appear to be a monthly title like BYO or Zymurgy... I've seen their cheese making and gardening magazines too.  They are all very well done magazines.  I purchased my copy @ B&N , but have seen them also at Farm & Fleet  and Tractor Supply as well. 

General Homebrew Discussion / Re: Brewing Beer Magazine
« on: December 15, 2014, 02:24:07 PM »

General Homebrew Discussion / Brewing Beer Magazine
« on: December 15, 2014, 02:21:58 PM »
Was out shopping over the weekend and saw this Brewing Beer magazine. I purchased a copy for myself and after spending more time reviewing it I think I going to buy another copy or two to gift to friends that are on the fence about starting homebrewing.  Lots of great articles, brewing and cooking recipes.

The Pub / Re: Pete Coors doesn't get it
« on: May 06, 2014, 03:18:14 PM »
However, the overall beer economy is changing because the beer lovers around the world want something more than a light watery fizzy drink, and prefer variety.

Equipment and Software / Re: Bru Gear - New Kettle/ Conical Manufacturer
« on: February 07, 2014, 08:15:00 PM »
I went for a 20gal kettle w/Tri-Clover fittings... It will be interesting to compare against my Blichmann 20 gal. kettles.  I wish Blichmann would have a Tri-clover fitting version of their kettles.

Equipment and Software / Re: Stainless Steel Hop Flter
« on: February 07, 2014, 08:13:31 PM »
I have one from Stainless Brewing to fit my Blichmann 20 gal. boiler maker kettle.  It is nicely built.

General Homebrew Discussion / Re: Denny's been keeping his pencil sharp!
« on: January 28, 2014, 07:07:13 PM »
Just received my copy of "Craft Beer for the Homebrewer".   Nicely layout and every recipe looks tasty.

The Pub / Re: Fund Raiser for Kathy Stock
« on: December 11, 2013, 10:55:55 PM »
Never met her, but just donated $25 to her fundraiser.  My heart goes out to her & her husband.

Any Zymurgist is good in my book.

Equipment and Software / Re: Advice on Building a brew system
« on: November 23, 2013, 04:02:48 PM »
I would encourage you to take a look at the BCS-460 and BCS-462  Using a web browser and the BCS you can control the temps of your vessels and RIMS/HERMS equipment.  I've been using it for 3 years and it is setup for RIMS... and it can also be used to control your lager chamber or freezer full of kegs.

When I started brewing 6 years ago I was using 5 & 10 gal. Orange coolers, then decided to move up to Blichmann 20 gal kettles for my Mashtun, HLT and Boil Kettles.  If I would have waited a little longer I would probably have purchased kettles from Brewers Hardware instead because I use alot of Tri-Clover fittings in my setup ...

I have a friend who purchased kettles from Stout Tanks and is happy with his purchase.

Equipment and Software / Re: Morebeer ultimate sparge arm
« on: November 21, 2013, 09:33:31 PM »
I bought one a few months ago. It's very nice and sturdy.  It replaced my blichmann sparge arm.

Equipment and Software / Re: Direct heat recirculation mash tun
« on: November 07, 2013, 04:56:23 PM »
You could also use a bucket heater in your mashtun - of course hooked up to something like a Johnson controller and use your pump to recirculate...  The bucket heater can get a bit messy - especially compared to using a RIMS module which is much easier to clean.

Pages: [1] 2 3 ... 6