Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - ncbluesman

Pages: [1] 2 3
All Grain Brewing / Re: Help with an ris
« on: December 23, 2017, 09:36:48 PM »
I do a RIS annually with my oldest son. When fermentation is complete, we rack to co2-filled corny kegs and add muslin bag of bourbon soaked oak cubes for about 8 months. On bottling day we add Lallemande CBC-1 & priming sugar to each keg, then bottle. Turns out great for us.

All Grain Brewing / Re: The closest clone I have ever made / Jai Alai
« on: December 23, 2017, 09:30:57 PM »

This looks very good.  I'd like to brew it but have a question about the malt bill. Did you use all US malts? Which brand?

I love brewing good clone recipes. Thank you so much for sharing the results of your hard work and sparing us the trial and error.


Kegging and Bottling / Re: Bottling a Russian Imperial Stout
« on: October 14, 2016, 04:23:06 PM »
I am not familiar with the yeast you're using, but i think it is way to much.  The last beer I bottle conditioned  I used 1tsp of CBC-1 to make a 100ml slurry.  I then used 4 tsp of the slurry and the appropriate amount of priming sugar (120grams ish) to carbonate 5 gallons of a Dark Saison I aged on fruit with Brett for 6 months to 2.5 psi.  I am by no means an expert, would hate for you to end up with a bunch of bottle bombs, just check your calculations again.

Thanks for the note. The Lalvin ec-1118 is a champagne yeast. You raise a great question: I didn't think about the fact that I may be over-pitching my bottling yeast. I don't normally bottle and this beer is a beast: OG 1.127 FG 1.040. I didn't want to bottle it and end up with uncarbonated/undercarbonated bottles that I can't do much to fix.

I'll do further research on the topic.

Kegging and Bottling / Bottling a Russian Imperial Stout
« on: October 14, 2016, 03:08:14 PM »
I brewed 10 gallons of Russian Imperial Stout (Goose Island Bourbon County clone) on January 2 of this year. It is now sitting uncarbonated in 2 kegs conditioning at 40 degrees on bourbon soaked oak cubes. I plan to bottle all of it and would like some critique on my plan.

I plan to let the kegs come to room temperature. I will remove the oak cubes. I will a hydrate some Lalvin ec-1118 dry yeast - 1 packet for each keg. I will dissolve 4oz of corn sugar into a cup of hot water. I'll add both the priming sugar and the yeast to each keg and agitate it for a half hour to ensure it is evenly distributed then bottle into bombers using my blichmann beer gun.

Once bottled I will store them for a couple of weeks in a warm area.

Any and all ideas are welcome.

Sent from my iPhone using Tapatalk

Ingredients / Re: Domestic vs Continental Pilsner Malt
« on: May 15, 2014, 05:15:06 PM »
Thanks to all who shared their experience. I look forward to my experiments with domestic pilsner malt and will refer back to these comments when I taste the results. I may even make the same recipe twice but switch out the malts.  That would be educational.

Ingredients / Re: The latest experiment
« on: May 08, 2014, 09:24:38 PM »
Cool experiment. Thank you, Denny. I've always been a pellet guy but I'm curious of the impact of 2 of the 4 leaf hops being homegrown.

Ingredients / Domestic vs Continental Pilsner Malt
« on: May 08, 2014, 02:26:43 PM »
I bought a bag of Rahr Premium Pilsner. Has anyone compared this with continental Pilsner malts? I recognize that if I make a Bo-Pils, it won't be authentic, but how would it differ from one?

The price difference was compelling.

Homebrew Competitions / Re: NHC
« on: May 07, 2014, 05:42:45 PM »
I know they're popular categories, but dang, a 43 doesn't advance?

I'm sorry you didn't advance. I can understand why you feel that way having scored a 43.  I got a 45 in the IPA category in Nashville and squeaked into the second round with a 3rd! As I understand it, your initial score will get you into the mini-bos, but after that scores are no longer considered. 

Question for the experienced judges: What exactly happens in a mini-bos?  How are the judges selected to participate and what process is followed to select the 1st, 2nd and 3rd place entries?

General Homebrew Discussion / Re: To clone or not to clone
« on: May 06, 2014, 03:52:50 PM »
To each, his own.

For me, I'm in a phase where I love to try to reproduce certain beers.  I've done several beers from CYBI podcasts and have been very impressed with the results. Living on the East Coast, I'm not able to buy some of the west coast beers I've enjoyed, such as: Deschutes Mirror Pond & Black Butte Porter or Firestone Walker's Union Jack & Pale 31, Pizza Port's Shark Bite Red. It allows me to focus on my process, remove variation and improve repeatability while producing delicious beer from proven recipes.

Maybe when I'm done having fun with other people's recipes, I'll focus on the creativity of recipe formulation. Then again, maybe not.

Kegging and Bottling / Re: Keg Manufacturer Preference
« on: May 06, 2014, 11:48:03 AM »
I wish the 3 gallon kegs cost less. But they cost just as much, and more in some cases, than the 5 gallon kegs. It's crazy. I usually put in the comments of the order to make sure the posts can be removed before shipping.

I always assumed the higher cost of 3 gallon kegs was due to the lower economies of scale. They don't make as many, so the fixed costs of manufacturing them are shared by a smaller number of units.  Just a guess, though.

Equipment and Software / Re: jerry rigging a lauter tun
« on: May 03, 2014, 03:47:59 PM »
Have you considered using the brew in a bag method?

Homebrew Competitions / Re: NHC 2014 scoring sheets
« on: May 01, 2014, 03:48:32 AM »
I got my score sheets from Nashville, today. 

Kegging and Bottling / Re: Barleywine Bottling Advice
« on: April 30, 2014, 02:27:11 PM »
I suppose you could try for the best of both worlds - force carbonate to a low level, then add just the slightest amount of sugar at bottling just to wake up the yeast and finish the last half-volume or so. That should minimize the sediment in the bottle, but hopefully allow for the yeast to take up the small amount of O2 introduced at bottling.

Great idea, Eric. I like it. I'll have a lower risk of foaming when I bottle and i'll get the benefit of an O2 scrub which should make for a longer lasting bottled beer. 

Kegging and Bottling / Re: Shake Carbing
« on: April 30, 2014, 12:53:23 AM »
Does anyone use a carbonator cap and PET bottle to fine tune carbonation for competition submissions? Seems like a quick way to chill the beer, hit it with gas at the desired PSI, shake, bleed, and repeat a couple times before transferring into chilled bottles and capping. I've gotten to a point of feeling comfortable enough to enter my beer into some competitions but not comfortable with picking a random bottle and hoping it carbed correctly. Have noticed some inconsistencies with bottle conditioning, so I've switched to kegging.

Sent from my Amazon Tate using Tapatalk
I think you'd oxygenate the beer transferring to chilled bottles, unless you have a device that would do that for you.  Determine the PSI you need to achieve the volumes of CO2 at the temperature of your refrigeration.  Apply the co2 to the liquid post, using the proper disconnect, of course. And give it 3 or 4 days and you'll be golden. I overcarbonate slightly for competition because you will lose some bottling. A poorman's Beer Gun is a picnic tap and a piece of gas line that fits into the faucet. 

Homebrew Competitions / Re: NHC 2014 scoring sheets
« on: April 30, 2014, 12:47:12 AM »
I'm still waiting for Nashville score sheets.

Pages: [1] 2 3