Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - cash

Pages: [1]
1
Beer Travel / San Francisco
« on: October 10, 2012, 07:35:26 AM »
Any suggestions for craft beer pubs etc in San Francisco this weekend?

2
Classifieds / RANDALL 3.0 FOR SALE
« on: September 12, 2012, 01:16:23 PM »
Price is $470, exactly what I have invested in it .Contact me at robertovercash@charlotte.twcbc.com for a picture if you prefer. For some reason I could not add one to this post.Shipping will be paid by the buyer whatever UPS charges are to your area.Made exactly according to Dogfish's PDF specs using their list of materials and sources. I assembled three, one for myself, one as a gift, and have the third for sale

3
Yeast and Fermentation / fermcap and attenuation
« on: August 14, 2012, 06:16:00 AM »
Are there any negatives concerning use of fermcap as far as attenuation is concerned?

4
Equipment and Software / Re: Randall 3.0
« on: February 28, 2012, 07:11:59 AM »
Progressive Machining is probably out at this time.I purchased the last one they had about 10 days ago. They are really nice people to work with and would be glad to let you know when they plan to machine some more bushings. They are machined individually by hand and were made originally specifically for one of Sam's engineers at DFH. Give them a call at 302-422-8913, tell them what you are making .They"ll know which bushing you are needing. It has no part number.Good luck

5
Equipment and Software / Re: Randall 3.0
« on: February 15, 2012, 08:26:23 AM »
I am assembling a Randall 3.0(http://www.dogfish.com/files/Randall...guide.pdf).The parts list includes a Micro-matic faucet adapter CK-035 which evidently does not exist on Micro-matic's web site.The part must thread into the 7/8-14 bushing and allow connection to a beer line. Anyone have any suggestions to an alternative part.For anyone interested I am including a You-tube video of the Randall in use. Dogfish Head Randall The Enamel Animal v3.0 @ The Red Hot - YouTube. Thanks in advance for any help...Cash

6
Equipment and Software / Randall 3.0
« on: February 14, 2012, 12:15:50 PM »
http://www.youtube.com/watch?v=PmPrg1pq1x8  Anyone on the forum made one of these? Dogfish has posted the part list and a picture. What I can't understand is what exactly directs the beer into the hop vessel before it goes into the de-foaming vessel?Could the air vents be the answer? I've seen previous versions in action but not the #.0 version. Thanks in advance

7
General Homebrew Discussion / Re: Refractometer vs. hydrometer
« on: February 06, 2012, 12:11:31 PM »
Thanks, I do remember reading that awhile ago. I'll have to do some reading on the adjustment for alcohol and gravity.So its refractometer during mash and hydrometer afterward.

8
General Homebrew Discussion / Re: Refractometer vs. hydrometer
« on: February 06, 2012, 07:15:13 AM »
I have two hydrometers and a refractometer. Here's the question:Using distilled water at 67 deg.  Hydrometer #1 reads 1.002 Hydrometer#2 reads dead on 1.000.But when I measured gravity of primary, I got #1 at 1.038, #2 at 1.032 and the refractometer(calibrated to .000 with 67 deg distilled water) reads 1.050.I've tried cleaning the blue glass and the cover bue still get the  1.050. Since there is obviously some malfunction of the spec., would there be anything wrong with adjusting the spec to read 1.032 and frequently cross checking it's reading with the same hydrometer#2. I really do like the ease of using it, but knew something was wrong after 7 days of active fermentation only reading 1.050. Any suggestions?

9
All Grain Brewing / Maris Otter
« on: January 26, 2012, 09:05:26 AM »
I've read on several threads the recommendation of using a protein rest when a large portion of the grain bill is Maris Otter. Is there a consensus opinion whether this is necessary or not.I love to use it but really have not had great efficiency, not that this number is all that important but hitting target gravities from recipes is harder for me when MO is substituted for 2 row.

10
Equipment and Software / fermenters
« on: November 30, 2011, 07:51:08 AM »
need source for screw top 6.5 fermenter buckets. Anyone have any recommendations. Thanks

11
All Grain Brewing / Water amendment
« on: November 14, 2011, 02:52:46 PM »
My water analysis is as follows: Ca 6, Mg 2, Na 18, SO4 18, Cl11, HCO3 35, T. Hardness 23 , Alkalinity 29 ,RA 23 SO4/Cl Ratio 1.6
  I am going to brew(all grain) an Imp. IPA using 16.5 lbs maris otter and 1lb crystal10(SRM~9.4)In using Bru'n Water I tried to match the Pale Ale profile as closely as possible.I am very new to water amendments so I would really appreciate any input/suggestions about the following water amendment proposal.
Gypsum 1.25( gm/gal)
Epsom .50
CaCl     .25
Chalk    .50
Phosphoric acid .5ml/gal

12
All Grain Brewing / Re: Water Chemistry... Please help!
« on: October 03, 2011, 12:55:39 PM »
Are you using R/O water for both mash and sparge or can the sparge water be filtered tap water

13
All Grain Brewing / Re: dead space
« on: June 28, 2011, 06:31:45 AM »
thanks, that makes sense to me. I've recently started using Beersmith but I have been having a little trouble hitting the strike temps without a lot of temp corrections and  the mash seems a little dry also.I usually add some more strike water to get the consistency I'm looking for. Like you guys , I'm really not so concerned with the numerical proportions.

14
All Grain Brewing / Re: Denny Conn's BVIP (pic)+(more pics added)
« on: June 27, 2011, 12:38:47 PM »
love this recipe. Do you notice a gradual decrease in the vanilla taste upon aging? I have a  few bottles about 10 mos old and there seems to be a slightly more bourbon note than originally noted, the vanilla is very subdued. Do I need more vanilla next time or less bourbon

15
All Grain Brewing / dead space
« on: June 27, 2011, 12:03:40 PM »
do i add the dead space volume under the false bottom of my S.S mash tun to the calculated 1.3 qts/lb water needed to mash in

Pages: [1]