Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - galapagos jim

Pages: [1] 2 3
1
Homebrew Competitions / Re: NHC
« on: April 25, 2014, 02:28:04 PM »
Full scoresheets were not used for this competiton.  You'll receive checkbox scoresheets for each beer you submitted though via snail mail.

Thanks. I'll keep my eye out for Mr. Postman.

2
Homebrew Competitions / Re: NHC
« on: April 25, 2014, 02:20:32 PM »
Scores are posted on the competition site. http://brewingcompetition.com/

I can see my score on the competition site, but will I be getting a full score sheet with more detail, like notes from the judges? I don't see a link for that.

New to this competition thing, eager to hear what the judges said about my beer.

3
Beer Travel / Re: Las Vegas road trip: where to fill my growlers?
« on: April 24, 2014, 04:46:10 PM »
Got back from this trip a couple of weeks ago. Here's a recap:

First brewery stop was Ruby Mountain Brewing, south of Wells, Nevada. Can't say enough good things about this place, which is almost literally in the middle of nowhere. Had a great time chatting with owner Steve over samples of his amber, pale, and porter. I liked the amber, which is unusual for me, but this one is dry and hoppy and not sweet. More like a hoppy brown with a little extra oomph in the caramel. If you're in the area (NE Nevada), I highly recommend giving Steve a call. Mind that the brewery doesn't have a tap room or regular hours, and it's on his personal property, Angel Creek Ranch on Hwy 232 (not where Google Maps thinks it is). Drive past the house and park next to the brewery.

During the next week in Las Vegas I didn't have time to get out to breweries, but was happy to see that the craft beer invasion was in full bloom there. The Burger Bar at Mandalay Bay had a good tap selection and a phenomenal bottle list. At the new Linq mall next to the Flamingo there is a Tap House Grill, though we ended up at Brooklyn Bowl instead, sipping Brooklyn Brewery suds. On our last day in Vegas we did get out to a couple of breweries.

Banger Brewing is the new kid in town. Located on the Fremont Street pedestrian mall, downtown. They're small but have a comfortable tap room. Their beer was good, with some flaws but lots of potential. I had a good chat with an enthusiastic guy behind the bar (owner/brewer?), who took me over to the glass-walled brewery when I started asking questions about their water filtration and other processes. Really nice folks there and I'm looking forward to visiting them again next year.

Then we drove out to Tenaya Creek. I wish I could give a better report, but I was very disappointed. The beer was mediocre, nothing inspiring or interesting. The seasonal Baltic porter was... meh. The tap room is an uninspiring tavern, with noisy video poker in the bar and cigarette smoke hanging in the air. We got some relief on an outdoor patio, though it's next to a busy street so a bit noisy. Overall it's not a place that I'm going to hurry back to.

After all that I never did get any growlers filled in Nevada. But on the way back we stopped at Sierra Nevada, Ninkasi, and the Lucky Lab in North Portland, so I got my fills. ;)

4
Equipment and Software / Re: Speidel Fermenter
« on: April 22, 2014, 06:59:10 PM »
I've also got the 8 gallon Spiedel. I like it. It's light, the handles make it easy to maneuver, cleans easily, and it's got enough headspace on a 5-6 gallon batch that I don't need to worry about a blowoff tube.

I use the spigot. Some people don't because infectious crud can grow in there if you don't clean it thoroughly. Case in point: a couple of batches ago I drew a gravity sample after filling the fermenter, and when I came back to transfer to keg the spigot was black and nasty. I siphoned that batch out. Last weekend I made sure to spritz the spigot with Star San before putting it down to ferment.

One more note: there's almost exactly 1/2 gallon of dead space at the bottom, below the level of the outlet. So if you do use the spigot that's how much you'll lose unless you tip the dregs out.

5
Beer Travel / Re: Las Vegas road trip: where to fill my growlers?
« on: March 10, 2014, 06:12:50 PM »
Our timeshare is walking distance from Ellis Island.  The beer there is cheap (I think is was $8 a growler).  We have one of their growlers every night.  During football games they discount the beer even more.  It was like $2 a pint then.

Not the best craft beer in the world, but they brew it on the premises.

Thanks. I hit up Ellis on a past trip, and I recall the beer being OK, and the wheat specifically being passable. It was by far the best of the in-casino breweries.

Any suggestions for off-strip?

6
Beer Travel / Las Vegas road trip: where to fill my growlers?
« on: March 08, 2014, 08:59:20 PM »
Every year in April the office is sends me to Las Vegas for the big convention. This year, instead of flying, a buddy and I are going to road-trip it between Seattle and LV and back. This means I'll get to bring back some growlers!

I'm kinda familiar with the Vegas beer scene from previous years. I plan to hit up Big Dog's because I liked them in the past, and Tenaya Creek because I've never been there. What else?

We'll try to hit breweries on the road, too, but we're likely going to stay off the main highways. No set route and recommendations welcomed.

7
General Homebrew Discussion / Re: a great brew day with new kolsch recipe
« on: December 20, 2013, 05:01:38 PM »
I ferment my Kölsch (Wyeast 2565) at 59F and it always comes out great.

Please post back when you taste the results (it sounds delicious). I haven't heard of this malt before. Can you share your recipe?

8
Beer Travel / New York beer report
« on: October 22, 2013, 03:48:09 PM »
Just spent a few days in New York on vacation. Here are a few notes about the breweries and beers I found.

Singlecut Beersmiths in Astoria, Queens was the big hit. They're small and have been open less than a year. Bit of a pain to get to; take the 7 train to the end of the line in Astoria, then walk about a mile further. Don't mind the walk, it's a good neighborhood and worth the travel distance. They have dedicated lagering tanks, and their lagers were pretty good. The Olympic White Lagrrr especially, and the rum-barrel aged schwarzbier on nitro was a standout. For music fans, there's a well-equipped stage above the office and a selection of vinyl behind the counter.
http://www.singlecutbeer.com/

Brooklyn Brewery was a bit of a hassle. Don't get me wrong: the beer was good and the brewery space was nice. The problem was getting there from Queens; subway track work required transferring to a shuttle, and I wasn't sure which station to use and then had trouble with my MetroCard... By the time I got to Brooklyn it was 6pm on Saturday evening and the tasting room was packed and loud and the line for beer was almost out the door. You have to go through a two-step process, buying tokens first at the merch booth (it sounds like a hassle but it makes the beer line go a lot faster). After I got my beer there was no place to sit, so I hung out next to the fermenters. On the upside, another lonely beer geek was on the bench next to me, so I made a friend.

Everything I drank from Brooklyn (both at the brewery and elsewhere in the city) was solid, but didn't impress me in the way Singlecut did. Belgian pale, saison, bier de garde, Oktoberfest. There's an AHA discount at Brooklyn but I completely forgot about it when I was there.

Peekskill Brewery was recommended to me by the barkeep at Singlecut. I had Sunday free, so I grabbed the 10:30 Hudson train from Grand Central. Train tickets cost about $23 round trip, and it was worth it for the scenery alone. It was an easy, pleasant 45-minute train ride along the Hudson River with the leaves just putting on their autumn coats. PB is in a renovated old building just a short walk from the train station and there's a lovely park on the river, across the street. The beer was fairly good across the board. They had a lot of IPA's. Dream of the 90's is a coffee IPA, and yes, coffee and hops can work together. The Simple Sour was also pleasant, a subtle version of a brett beer. I didn't like their single-hop Centennial, though. Very rough hop character. The food there was only OK. Decent burger but terrible onion rings.
http://peekskillbrewery.wordpress.com/

In the city I was surprised by how easy it was to find good beer. I had figured it would be like Vegas, a beer desert served only by macros, but it was much the opposite. Pretty much every place we went had local taps or at least bottles. We happened upon the outdoor Madison Square Eats festival and had a relaxing first night in New York drinking and eating underneath the Flatiron Building. Before our requisite Broadway show, we found a beer bar called Three Monkeys at 54th and Broadway; they have a well-curated tap list and tasty food.

All the beer I remember having was solid (no specific comments): Ommegang Scythe & Sickle, KelSo nut brown, Southern Tier 2x stout, Blue Point Toasted (Vienna) lager. There were some other beers, not necessarily local, but I've lost them in the haze of memories from the trip.

The only disappointment that I had is while there are many breweries in New York City, few of them have tap rooms. It seemed to be only Singlecut, Brooklyn, and a handful of brewpubs in Manhattan. I presume that New York licensing laws make taprooms difficult. But at least I know now that it's not hard to find a tasty, local pint in New York.

9
General Homebrew Discussion / Re: Gorgeous Brew Day
« on: October 18, 2013, 03:19:12 PM »
On the drive from Bend to the coast there's a pretty spectacular lava field.  Is that it?

That's definitely not the Newberry Crater flow; you have to take a road east off highway 97 to get there. Well worth the trip. I see a couple different lava fields on the map west of Bend, so you'll have to be more specific about which highway you're referring to.

10
General Homebrew Discussion / Re: Gorgeous Brew Day
« on: October 18, 2013, 02:41:27 PM »
I can only see two from my house. Hood is about 50 miles away. Adams is about 20. From a hill south of my place you can see Rainier Adams St Helens Hood and Jefferson

Definitely jealous, from someone who grew up in sight of Wy'east (Hood) and Loowit (Helens). Up here in Seattle we only get Tacoma (Rainier), and Kulshan (Baker) if you've got a good north view. But we also get the North Cascades and Olympics on clear days, so it comes out even.

Punatic, you ever been out to Central Oregon? The obsidian flow at Newberry Crater is a sight.

11
Are any of these machines self-cleaning or do they just do the fun part and make me their b!tch?

The video and FAQ for PicoBrew say that the bins are dishwasher-safe. They do caution to use enzymatic cleaning tablets, not regular dishwasher soap. There supposedly also a cleaning cycle for the machine innards. Fairly well thought-out, IMO.

I don't recall the BrewBot page talking much about cleaning. It's been a while since I looked at the WilliamsWarm but I think it has an automatic cleaning cycle.

12
Two new homebrew appliances launched on Kickstarter recently.

PicoBrew
http://www.kickstarter.com/projects/1708005089/picobrew-zymatic-the-automatic-beer-brewing-applia

BrewBot
http://www.kickstarter.com/projects/cargo/brewbot-the-smart-brewing-appliance

I'm curious what other homebrewers think of the idea of an automated brewing machine. What's your opinion? Would you use one of these machines? Have you kicked them?

I'm fascinated by the machines but my opinion is mixed. There's an obvious problem to solve that I feel the pain of: all-grain homebrewing is a time-consuming hobby with lots of tedious clean-up work. Yet I can't help feeling that to an experienced homebrewer, these machines are like selling a bread-making machine to a baker. Yes, it's consistent and has good mechanics but it blinds you from the intricacies of the process and the limitations of the machine can restrict creativity.

(Then again, I'm an advocate for creativity being inspired by constricted conditions so I could be talking out my arse here.)

From a marketing standpoint there's the "it's so simple anyone can do it" aspect of a brewing machine. That's nice, but the lack of instant gratification in brewing, not the complexity, is what I think will prevent even this type of machine from entering the mass market. A good number of these, like many a homebrew kit, are probably going to gather dust in the garage after the initial novelty wears off. After all, you don't need a $1500 machine to make good beer: at a minimum you need a big soup pot and a bucket.

The fact that these machines don't manage the fermentation process bothers me. These are really just wort-making machines. That's the more complex part of the process if you brew all-grain but it's only half of the story. The endorsement by White Labs is a little puzzling to me.

Maybe I have too much invested in my current practices to see the value in this level of automated brewing. I'm biased for sure.

I did have an opportunity earlier this year to taste beer produced by one of the prototype PicoBrew boxes. A friend of mine knows one of the founders and passed me a growler of machine-brewed porter. It was good but not remarkable. Too roasty for my tastes, somewhat light-bodied and lacked complexity in the flavor, but nothing technically wrong with the beer.

And worth noting these projects aren't the first to market with a homebrew machine:
http://www.williamswarn.com/

13
Equipment and Software / Re: Choosing The Right Brewpot
« on: September 27, 2013, 09:05:48 PM »
> I don't understand why in the world anyone needs a thermometer on a boil kettle. 

I do infusion mashes in beverage coolers, so I use the thermometer to tell when my mash water is the right temp before transfer.

> And we see the effects of not properly caring for an aluminum pot.  To my knowledge, there is no need to sanitize a kettle and there is no need to remove anything more than the trub with a scrubby.  Sorry for your loss.

If it was Star San I left in there (could've been PBW for multiple days, I can't remember now), it was only temporary storage in-between cleaning tasks. Purely ignorance on my part. I wanted a bigger kettle with a ball valve anyway, so it gave me the opportunity to upgrade.

14
Equipment and Software / Re: Choosing The Right Brewpot
« on: September 26, 2013, 02:58:09 PM »
Recently I researched buying a new kettle, but did not pull the trigger. (Bought a new guitar instead. Choices... choices...) Like you I currently brew 5 gallons but would like the flexibility to do 10, so when I do buy that next kettle it will be 15 gallons.

One issue with size I found was that some of the preassembled 15 gallon kettles, like the Blichmann model, put the thermometer at around the 6 gallon mark, making it somewhat less useful for 5 gallon batches.

I also wholly recommend getting or modifying a kettle to have a ball valve. No reason that you need to be lifting or even siphoning.

On aluminum vs stainless steel, it's your call. Aluminum is cheaper, but requires more maintenance and isn't as easy to modify (ie., drilling ports and/or welding; refer to Palmer's How To Brew). I had an 8 gallon aluminum pot for a while, I stopped using it because I upgraded to full boils and had problems with boilover, and also I managed to pit the interior by leaving some cleaning chemical (or possibly temp storage of Star San) in it for too long. Those sort of problems are less likely with stainless.

15
General Homebrew Discussion / Re: Roggenbier!
« on: August 04, 2013, 04:04:58 PM »
Reuben's Brews in Seattle makes an outstanding roggenbier. Not that I have experience or authority to compare it to other examples of style, but outstanding at least in the sense that I'll drink it any chance I get. It's available in bottles wherever Reuben's Brews fine beers are sold (not much out side of WA yet).

I've had Rogue's "roguenbier", too. It was pretty good, but a quite sweet compared to Reuben's.

Definitely a style worth reviving.

Pages: [1] 2 3