Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - thomasben

Pages: [1] 2 3 ... 9
1
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: May 01, 2013, 10:12:04 AM »
Faucets brand stinking new. I got it from stainless brewing.com

The plates in there but doesn't look like its working what so ever. Gonna return


2
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: May 01, 2013, 08:13:26 AM »
Crazy...ok then I'll try and return it

3
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 30, 2013, 10:43:35 AM »
No its way more pronounced when the psi is higher. Has something to do with that

4
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 30, 2013, 10:31:55 AM »
Still a bit too fast. I get barely a nitro head and it taste extremely chemically now. I'm sorta lost

5
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 21, 2013, 03:10:32 PM »
Added 16 feet. Helped a lot.

6
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 20, 2013, 10:20:12 AM »
Thanks Denny. I'll do that. Beer is blasting right out of the stout faucet! Great special bitter though...

7
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 20, 2013, 07:48:44 AM »
So apparently beer gas is a different animal, so should I go get 15-20ft of tubing and see if that helps?

8
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 20, 2013, 05:27:03 AM »
No its 12 psi and I knock it down a bit after it's carbed because that's just straight c02, this is nitro-thought it was different....

9
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 19, 2013, 08:11:20 AM »
All my lines are seven feet. Serving pressure is always fantastic,  beer is always delicious. This my my first exp with beer gas. We got everything we needed for nitro, regulator tank faucet shanks etc...

10
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 19, 2013, 08:07:35 AM »
Restrictor plate is in yes. Full stainless stout faucet. Sry my mistake. Lines are 3/16

11
Kegging and Bottling / Re: Problems serving beer!! Help needed!
« on: April 18, 2013, 10:08:20 PM »
Beer line is about 7 feet. 5/16 i think, not 100% on that. Temp is 45 in the keezer.

Do you think its the line? I was told 25-30 psi for beer gas.

12
Kegging and Bottling / Problems serving beer!! Help needed!
« on: April 18, 2013, 06:07:35 PM »
Hey everyone. I'm honestly baffled I can't figure this out on my own but here it goes. This is a nitro problem. I kegged my special bitter and hit it with 4psi just to give it around 1 volume of co2. After that I connected my beer gas(75% nitro, 25% co2) and hit it with 25psi. After a couple weeks I go to pour a pint and it comes blasting out. Waaaaay too fast. I have no guesses after playing around with it the last week. Any help would be great.

Stout faucet has all pieces in it too btw.

13
General Homebrew Discussion / Stout faucets
« on: March 18, 2013, 11:18:11 AM »
Need some help. I'm buying a stout faucet and I would prefer stainless as my whole system top to bottom is stainless. I'm a bit overwhelmed with all the choices...anyone have any suggestions...there is one for 33$ on www.ritebrew.com but its chrome plated.

Micromatic sells a stainless but it has a plastic spout...any suggestions?

14
General Homebrew Discussion / Re: Pics of recent brews?
« on: March 04, 2013, 04:04:40 PM »


Janet's brown

15
General Homebrew Discussion / Re: Pics of recent brews?
« on: March 04, 2013, 04:04:03 PM »


Oatmeal stout.

Pages: [1] 2 3 ... 9