Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PeckerWood

Pages: 1 [2]
16
All Grain Brewing / Re: Brewing for a party on a deadline.
« on: October 03, 2012, 03:36:25 PM »
I have to give all the credit to BierMuncher from HBT on this recipe, as I've made it 3 times now.  It's a very simple, quick, and delicious brew that will satisfy both the craft beer drinkers and also the BMC crowd.  I brewed this too for my brother in law's wedding and it was a hit at the party!  Just make sure to make a yeast starter so it really goes to work with such a short deadline.  Also, I woulod carbonate rapidly by turning the gas up to 30 PSI, give it a cold shake for about ten minutes and hold at that pressure until turnout which is just a couple days after kegging.  Just burp the keg prior to serving at proper PSI (12 PSI for me) so that you don't ruin your CO2 regulator.

-------------------------------------------------------------------------------------
I’ve been tweaking a house ale recipe for a few months now and this is it. This is the recipe that will be a permanent fixture at my house. I’ve brewed it twice, served the first 10 gallons to friends, families and “curious on-lookers”, and just finished the second 10 gallon batch with identical results.

Light and crisp. The IBU’s are on the low side, but there is a nice sweet/spicy balance to the beer. The great fresh taste of a craft ale with an extremely clean finish. This reminds me of what a local craft brewery might come out of the gates with to win over a new market. Very drinkable with wide appeal. I’ve yet to have anyone, even BMC drinkers not say it’s one of the best beers they’ve tasted….period. The secret lies in the name. I moved through Northern Brewer, Nugget and Pearle hops, all in combination with Cascade. Even went with a strict Cascade hop bill, but was just a bit on the tart side for this lighter grain bill.

Once I matched up Centennial as the bittering hop and Cascade as a flavor/aroma hop…that’s when the magic happened.

This is also a simple, hard to screw up recipe. At just around 4%, this is a quaffer. Due to the lighter grain bill…this is easily a beer that can go from grain to glass in 2 weeks (if you keg).




****10-Gallon Batch****
Batch Size: 11.00 gal
Boil Size: 13.69 gal
Estimated OG: 1.039 SG
Estimated Color: 3.9 SRM
Estimated IBU: 21.6 IBU
Brewhouse Efficiency: 70.0 %
Boil Time: 60 Minutes

Ingredients:
------------
14.00 lb Pale Malt (2 Row) US (2.0 SRM)
1.25 lb Cara-Pils/Dextrine (2.0 SRM)
1.00 lb Caramel/Crystal Malt - 10L (10.0 SRM)
1.00 lb Vienna Malt (3.5 SRM)
0.50 oz Centennial [9.50%] (55 min)
0.50 oz Centennial [9.50%] (35 min)
0.50 oz Cascade [7.80%] (20 min)
0.50 oz Cascade [7.80%] (5 min)
1 Pkgs Nottingham (Danstar #-) (Hydrated)



****5 Gallon Batch****

Batch Size: 5.50 gal
Boil Size: 6.57 gal
Estimated OG: 1.040 SG
Estimated Color: 3.9 SRM
Estimated IBU: 21.5 IBU
Brewhouse Efficiency: 70.0 %
Boil Time: 60 Minutes

Ingredients:
------------
Amount
7.00 lb Pale Malt (2 Row) US (2.0 SRM)
0.75 lb Cara-Pils/Dextrine (2.0 SRM)
0.50 lb Caramel/Crystal Malt - 10L (10.0 SRM)
0.50 lb Vienna Malt (3.5 SRM)
0.25 oz Centennial [9.50%] (55 min)
0.25 oz Centennial [9.50%] (35 min)
0.25 oz Cascade [7.80%] (20 min)
0.25 oz Cascade [7.80%] (5 min)
1 Pkgs Nottingham (Danstar #-) (Hydrated)


Mash at 150 degrees for 60 minutes.


Pages: 1 [2]