Author Topic: NeoBrit stuck fermentation?  (Read 607 times)

Offline rbclay

  • Assistant Brewer
  • ***
  • Posts: 214
  • Northfield, MN
    • View Profile
NeoBrit stuck fermentation?
« on: December 02, 2011, 09:57:48 AM »
I pushed the envelope for the low end of the temp range for this strain. Pitched at 60F. OG 1052. Brown Porter. Expected a slight rise from active fermentation. I used a starter from a fresh pack and O2 in the wort before pitch. I put the bucket in the cold side of the room where ambient was 60ish. This has never been a problem before. Fermentation started actively as expected. After 9 days it was "stuck" at 1022 and was at 59F. I was fully expecting it to be done. I moved it to a warmer spot. Expected it to drop a few more points. Checked today after another 10 days. Beer is at 66F, but still at 1022. Beer is clear, but still has a good layer of yeast on top that hasn't fallen yet.

I had great results when I did this beer last year at 64 degrees. I thought for sure this one would rise to 64 from activity. Only a 4 degree difference obviously makes a big difference for this strain. Recommended temp range is 66-74. The beer I made last year at 64 was the silver medal winner at NHC and qualified for MCAB at the UMMO. This rebrew is for MCAB next month. Arrgghhh....

I try not to get too caught up in numbers. Just take good notes and repeat my process as closely as possible. Every time I've used this strain (at least 4 times) I've gotten 64-68% apparent attenuation. Right now this beer is at 57%. I'm good with 64%, even though that is lower than the expected range (72-77%) because my experience tells me that's what I get on my system and my beers are good.

Long explanation for my current issue. Any thoughts would be appreciated as always!


UPDATE: It occured to me I am using a brand new hydrometer. So I decided to test it in water. Guess what? It's about 4 points off!!  So I'm going with 1018 as my actual FG. That gets me my 64% aa. I'm good with that.
« Last Edit: December 02, 2011, 10:03:53 AM by rbclay »
Randy Clay
Milltown Mashers
https://www.facebook.com/groups/404574082932834/
BJCP Certified

Offline brewmichigan

  • Brewer
  • ****
  • Posts: 468
    • View Profile
Re: NeoBrit stuck fermentation?
« Reply #1 on: December 02, 2011, 10:01:04 AM »
How long since you moved it? I think it'll finish, just give it more time. If it doesn't happen in a few more days I might rouse the yeast a little. I don't have any experience with the Neo-Brit strain though.
Mike --- Flint, Michigan