Author Topic: Wooden Brew Stand?  (Read 1114 times)

Offline skyler

  • Brewmaster
  • *****
  • Posts: 785
  • Hmm. Human music. I like it.
    • View Profile
    • Brewing After Law School
Wooden Brew Stand?
« on: January 14, 2012, 11:30:30 AM »
I recently acquired a new (actually very old) coffee table, and so now have a spare one that is stained, scratched, ugly, extremely heavy, and solid wood. I was wondering what the dangers are of taking the table to the garage, putting my banjo burner atop it, and using it as a brew stand. Is the fact that it is wood a problem? Should I cover it with aluminum foil? Sheet metal? Just sell it on Craigslist and use bricks?

Offline oscarvan

  • Senior Brewmaster
  • ******
  • Posts: 1707
    • View Profile
Re: Wooden Brew Stand?
« Reply #1 on: January 14, 2012, 12:39:21 PM »
It should be OK......but if you want to be sure you could go to the home improvement palace of your choice and see if they have any damages sheets of Durarock or similar (tile backer board) and take it off their hands for a few shackles. If that doesn't work you can go to the outdoor department and see if there's any damaged pavers......

Usually you have to schmooze to get stuff marked down when it's damaged, but especially at Home Depot I have been quite successful with this technique.
Wooden Shoe Brew Works (not a commercial operation) Bethlehem, PA
I brew WITH style..... not necessarily TO style.....

Offline tschmidlin

  • I must live here
  • **********
  • Posts: 8198
  • Redmond, WA
    • View Profile
Re: Wooden Brew Stand?
« Reply #2 on: January 14, 2012, 08:41:02 PM »
I use a cookie sheet under my burners, it works fine and the wood doesn't seem to get warm.
Tom Schmidlin

Offline Jimmy K

  • Official Poobah of No Life.
  • *
  • Posts: 3646
  • Delaware
    • View Profile
Re: Wooden Brew Stand?
« Reply #3 on: January 14, 2012, 08:45:14 PM »
My stand is wood and I have a banjo burner on it. No problems. One day I plan to put a heat shield under the burner, but I haven't done that yet.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958