Author Topic: Filling Corney Keg @ Microbrewery  (Read 2130 times)

Offline bbump22

  • Assistant Brewer
  • ***
  • Posts: 124
    • View Profile
    • Bump City Brews
Filling Corney Keg @ Microbrewery
« on: January 26, 2010, 03:59:14 PM »
This is a Newb question cause I am a Newbie at kegging.

I plan on getting my corney keg filled up at a local microbrewery and they told me to make sure it was clean (check), sanitized (check), and pressurized (Not Checked).  I understand what they mean by pressurized, but a little unsure of the procedure.  My common sense tells me to put the lid on the keg and pump up for CO2 to around 30 PSI until I no longer hear the gas flowing...check for any leaks and then thats it.  Does the sound right? 

Thanks in advance!
mmmm....beer

Offline skyler

  • Brewmaster
  • *****
  • Posts: 646
    • View Profile
    • Brewing After Law School
Re: Filling Corney Keg @ Microbrewery
« Reply #1 on: January 26, 2010, 06:08:46 PM »
yes

Offline dhacker

  • Brewmaster
  • *****
  • Posts: 684
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #2 on: January 26, 2010, 06:47:24 PM »
Why 30 psi?

Just curious.
Just brew it...

Offline beerocd

  • Senior Brewmaster
  • ******
  • Posts: 1400
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #3 on: January 26, 2010, 07:03:05 PM »
I'd guess that's probably what they're gonna push at, something like how a pressurized bottle filler would work.
The moral majority, is neither.

Offline mikeypedersen

  • Brewer
  • ****
  • Posts: 406
  • Longmont, CO
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #4 on: January 26, 2010, 07:14:34 PM »
Why 30 psi?

Just curious.
I would think it's because you want the keg to stay sealed.  Sometimes if there isn't enough pressure, the gaskets won't seat, and you'll have a leak.  Obviously 30 psi is more than enough to get your keg sealed, however, If there is a big change in temperature it can greatly change the pressure inside the keg.  The brewery has to allow pressure out of the keg while filling it or else it might blow!

Offline dhacker

  • Brewmaster
  • *****
  • Posts: 684
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #5 on: January 26, 2010, 07:46:28 PM »
I guess I was thinking the beer would be chilled to serving temp and set for the proper CO2 volume for cornies and most home brew systems . . i.e. 12-15 psi.

But I suppose it's really what suits the micro, and then it's left to the end user to balance for their needs. . . and yes, bleeding the keg as it is filled!  :)  
Just brew it...

Offline bbump22

  • Assistant Brewer
  • ***
  • Posts: 124
    • View Profile
    • Bump City Brews
Re: Filling Corney Keg @ Microbrewery
« Reply #6 on: January 27, 2010, 09:49:51 AM »
Thanks for the responses. 

I think that since the beer will already be carbonated at the micro is also a reason why they say to pressurize the keg.  I said 30 PSI's just because I figured it would pressurize the empty keg quicker...10 PSI would accomplish the same thing I guess.  When I bring the filled keg home and chill it, I will adjust it to around 10 PSI. 

Thanks again!
mmmm....beer

Offline denny

  • Administrator
  • I must live here
  • *****
  • Posts: 11626
  • Noti OR [1991.4, 287.6deg] AR
    • View Profile
    • Dennybrew
Re: Filling Corney Keg @ Microbrewery
« Reply #7 on: January 27, 2010, 10:25:18 AM »
But they're gonna have to release the pressure on the keg to fill it, right?  I can't see why they'd want it pressurized other than to make sure it isn't leaking.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

Offline dean

  • Brewmaster
  • *****
  • Posts: 922
  • Me and Hayden, my newest grandson.
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #8 on: January 27, 2010, 10:35:43 AM »
I think Denny's right, they probably want to make sure it isn't leaking as well as displace any oxygen so the beer doesn't oxidize when they fill it?

Offline blatz

  • Brewmaster General
  • *******
  • Posts: 2448
  • Paul Blatz - Jupiter, FL
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #9 on: January 27, 2010, 01:45:46 PM »
I know some of you purge with CO2 to prevent oxidation when filling - could that be it?

My bet is on it just being able to 'hold pressure' though.
The happiest people don’t necessarily have the best of everything; they just make the best of everything they have.

BJCP National: F0281

Offline bluesman

  • Global Moderator
  • I must live here
  • *****
  • Posts: 8677
  • Delaware
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #10 on: January 27, 2010, 02:23:47 PM »
I know some of you purge with CO2 to prevent oxidation when filling - could that be it?

My bet is on it just being able to 'hold pressure' though.

or both...pressure check and CO2 purge.
Ron Price

Offline dhacker

  • Brewmaster
  • *****
  • Posts: 684
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #11 on: January 27, 2010, 03:10:14 PM »
I really see no need to put more than 15 lbs. o' charge on it. The micro is gonna have to bleed it off to balance anyway. They want enough pressure to control the flow from their tank into the corny . . not too much where CO2 bubbles back into their tank and not so little that the initial rush of beer from their tank turns to foam in the corny.

I'm sure all will be revealed when you show up with corny in tow!  :D
Just brew it...

Offline central_wa_brewing

  • Cellarman
  • **
  • Posts: 32
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #12 on: January 27, 2010, 11:47:28 PM »
I'm guessing it's to keep down on excessive foaming in your keg and out of the pressure relief valve on your lid when relieving pressure in your keg during the transfer. 

Offline bbump22

  • Assistant Brewer
  • ***
  • Posts: 124
    • View Profile
    • Bump City Brews
Re: Filling Corney Keg @ Microbrewery
« Reply #13 on: January 28, 2010, 12:10:37 PM »
Thanks dhacker, i'll fill it using 15 PSIs.   
mmmm....beer

Offline dhacker

  • Brewmaster
  • *****
  • Posts: 684
    • View Profile
Re: Filling Corney Keg @ Microbrewery
« Reply #14 on: January 28, 2010, 05:43:22 PM »
No prob . . and be sure to use some keg lube on the lid O-ring!  :)
Just brew it...