Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Think my Johnson A419 just died  (Read 3340 times)

Offline narcout

  • Brewmaster General
  • *******
  • Posts: 2217
  • Los Angeles, CA
Think my Johnson A419 just died
« on: February 25, 2012, 11:23:35 pm »
After 4 years of service, I just tried to change the setpoint on my Johnson temperature controller and pushing the menu button had no effect. 

I opened it up, and I can't see that there's any visible issue.  The menu button appears to be mounted on the circuit board just like the other two.  It clicks just like it always does when I push on it, but it doesn't bring up the menu on the display.

Anyone encountered this before?  I figure it's probably toast.

Fortunately, the beer I brewed today is a tripel so I think it will be ok if I just let the temperature rise to wherever it wants to go (I pitched at 61 degrees).

I'll have time to buy a new controller before my next batch if necessary. 
Sometimes you just can't get enough - JAMC

Offline tygo

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2622
  • Sterling, VA
Re: Think my Johnson A419 just died
« Reply #1 on: February 25, 2012, 11:29:01 pm »
No idea on what to do about your issue.  I agree that just letting the triple go to where it wants will probably work.  That's what I'm currently doing with my golden strong.  I pitched at 60F, put it in a water bath in a keg tub, and let it run.  It went up to about 72F and I'm fine with that.

I'm incompetent when it comes to messing around with electronics so if one of mine goes I'll just be buying a new one  :)
« Last Edit: February 25, 2012, 11:31:17 pm by tygo »
Clint
Wort Hogs

Offline narcout

  • Brewmaster General
  • *******
  • Posts: 2217
  • Los Angeles, CA
Re: Think my Johnson A419 just died
« Reply #2 on: February 26, 2012, 12:12:12 am »
I figured it out.  The P5 jumper somehow became dislodged thus locking the touchpad.  Nice!
Sometimes you just can't get enough - JAMC

Offline punatic

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4583
  • Puna District, Hawaii Island (UTC -10)
Re: Think my Johnson A419 just died
« Reply #3 on: February 26, 2012, 01:29:08 am »
There ya go.  Good things happen when you play with your Johnson!   ::)
There is only one success: to be able to spend your life in your own way.


AHA Life Member #33907

Offline mabrungard

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2903
  • Water matters!
    • Bru'n Water
Re: Think my Johnson A419 just died
« Reply #4 on: February 26, 2012, 08:30:46 am »
As long as you don't go blind!
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://www.brunwater.com/

Like Bru'n Water on Facebook
https://www.facebook.com/Brun-Water-464551136933908/?ref=bookmarks

Offline Hokerer

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2654
  • Manassas, VA
Re: Think my Johnson A419 just died
« Reply #5 on: February 26, 2012, 08:52:43 am »
There ya go.  Good things happen when you play with your Johnson!   ::)

Thanks Carl, I just spewed OJ all over my 'puter   :o
Joe

Offline bluesman

  • I must live here
  • **********
  • Posts: 8825
  • Delaware
Re: Think my Johnson A419 just died
« Reply #6 on: February 26, 2012, 09:35:58 am »
There ya go.  Good things happen when you play with your Johnson!   ::)

Thanks Carl, I just spewed OJ all over my 'puter   :o

I just giggled a little too... ;D
Ron Price

narvin

  • Guest
Re: Think my Johnson A419 just died
« Reply #7 on: February 26, 2012, 09:56:42 am »