Author Topic: Promash Question...Batch Size?  (Read 692 times)

Offline roguejim

  • Brewer
  • ****
  • Posts: 462
    • View Profile
Promash Question...Batch Size?
« on: March 14, 2012, 11:49:26 AM »
Does the field for Batch Size indicate the pre- or post-boil volume?  On my program, I have the Batch Size equal to the Wort Size.  The reason I ask after all these years is that for some recipes, the brewer might have 5 Gal for his Batch Size, while I've seen some might have 8 Gal.  I always though the Batch Size indicated post-boil volume. :-\

Offline hoser

  • Brewmaster
  • *****
  • Posts: 755
    • View Profile
Re: Promash Question...Batch Size?
« Reply #1 on: March 14, 2012, 11:56:53 AM »
Depends on what your default system setting under measurements, size, and precision are in ProMash. You can always adjust it there.  My default is 6 gallons post-boil volume of wort prefermentation, based on losing 0.5 gallons in kettle and 0.5 gallons in fermenter for 5 gallons of finished beer. I usually bump that up to 7.5 gallons post-boil for really hoppy beers like an IIPA. Obviously this can be adjusted with the arrows and locked to keep all ratios the same.  If you click on the pre-boil button in your recipe it will give you your preboil volume based on evaporation rate and time to achieve your desired volume.
« Last Edit: March 14, 2012, 11:58:49 AM by hoser »

Offline brewsumore

  • Assistant Brewer
  • ***
  • Posts: 192
    • View Profile
Re: Promash Question...Batch Size?
« Reply #2 on: March 17, 2012, 09:36:21 PM »
I make my batch size same as my wort size, and then in the "water needed" section set for that same volume in the field "after chilling" to fermenter(s).  With a little trial and error, the rest for me is setting the efficiency setting in the "edit Ingredients" section so that I get the volume and SG I'm shooting for.  At least this is the basic approach for me, and works most accurately when I have few losses from wort left behind in the mashtun/kettle/other also as figured in the "water needed" section.  I often refer to past batches to recall what efficiency to expect based on the predicted OG.

edit: What that wort size volume is depends on how much beer I am making, usually 11 or 12 gallons.
« Last Edit: March 17, 2012, 09:38:04 PM by brewsumore »