Author Topic: Building a kegerator  (Read 4806 times)

Offline DrewG

  • Brewer
  • ****
  • Posts: 359
  • Thread Killer
    • View Profile
Building a kegerator
« on: September 17, 2012, 10:14:18 AM »
I've got a fridge with 2 kegs in it already, so i figure I might as well turn it into a kegerator seeing as how the GF has pre-approved moving it into the house (shes a beer nerd too).

So, what do I need, what should I watch out for, etc? Any advice greatly appreciated!
"Well, the Mexicans got a saying - what cannot be remedied must be endured."

-Barbarosa

Offline Titanium Brewing

  • Assistant Brewer
  • ***
  • Posts: 126
  • Westchester, CA
    • View Profile
    • The Peoples Republic of the Garage™
Re: Building a kegerator
« Reply #1 on: September 18, 2012, 12:41:43 PM »
The one thing I would recommend is using Perlick faucets. Seems the cheaper ones tend to stick. Well worth the extra couple bucks. I bought this, http://www.williamsbrewing.com/PERLICK-FORWARD-SEAL-FAUCET-WITH-SHANK-P1476.aspx. All I had to do was drill hole in door for the shank, then remove the picnic tap from the hose, and clap hose to nipple. Done and done. I also got another temp controller for my kegerator. http://titaniumbrewing.com/?p=207
AHA #210799

My wife said I was delusional. I almost fell off my unicorn laughing.

Offline beer_crafter

  • Assistant Brewer
  • ***
  • Posts: 165
  • Hoppin' the hell out of the place since 1995
    • View Profile
Re: Building a kegerator
« Reply #2 on: September 18, 2012, 02:22:23 PM »
I am really happy with the tower I bought from American Coffee Urn (ACU Metal Fab).
This was a few years ago so there may be a better option today.
http://www.acumetalfab.com/prod_pda.html

Offline snowtiger87

  • Brewer
  • ****
  • Posts: 419
    • View Profile
Re: Building a kegerator
« Reply #3 on: September 18, 2012, 02:57:45 PM »
Stand up fridge? Freezer on top or side by side?
Brewing since 1989 - BJCP National Rank
Member of KROC and Foam on the Range

Fermenting: Imperial IPA, Belgian Blonde
Conditioning: Dortmunder Export, English Barleywine
On tap: CAP, Steam Beer, ESB, Honey Doppel Mai-Bock
Newly Bottled:Belgian Tripel, Belgian Easter Ale, Summer Saison

Offline Jimmy K

  • Official Poobah of No Life.
  • *
  • Posts: 3629
  • Delaware
    • View Profile
Re: Building a kegerator
« Reply #4 on: September 20, 2012, 05:56:51 AM »
The one thing I would recommend is using Perlick faucets. Seems the cheaper ones tend to stick. Well worth the extra couple bucks. I bought this, http://www.williamsbrewing.com/PERLICK-FORWARD-SEAL-FAUCET-WITH-SHANK-P1476.aspx. All I had to do was drill hole in door for the shank, then remove the picnic tap from the hose, and clap hose to nipple. Done and done. I also got another temp controller for my kegerator. http://titaniumbrewing.com/?p=207

I agree, though I'd get a setup with a 3/16" barb. You'll need less beer line to balance the system that way. It seems that buying the taps as a unit like that is cheaper than buying the individual parts.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

Offline DrewG

  • Brewer
  • ****
  • Posts: 359
  • Thread Killer
    • View Profile
Re: Building a kegerator
« Reply #5 on: October 02, 2012, 10:33:11 AM »
Ran into a guy at the local who used to brew and quit. Ended up selling me his for 200 bucks. Nice 2 tap setup. Thanks for the input regardless.
"Well, the Mexicans got a saying - what cannot be remedied must be endured."

-Barbarosa

Offline Jimmy K

  • Official Poobah of No Life.
  • *
  • Posts: 3629
  • Delaware
    • View Profile
Re: Building a kegerator
« Reply #6 on: October 02, 2012, 11:43:04 AM »
Even better
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

Offline DrewG

  • Brewer
  • ****
  • Posts: 359
  • Thread Killer
    • View Profile
Re: Building a kegerator
« Reply #7 on: October 03, 2012, 01:30:49 PM »
Heres the rig:







"Well, the Mexicans got a saying - what cannot be remedied must be endured."

-Barbarosa

Offline euge

  • I must live here
  • **********
  • Posts: 7658
  • Estilo Casero
    • View Profile
Re: Building a kegerator
« Reply #8 on: October 03, 2012, 02:31:21 PM »
Heres the rig:









Very nice! Looks just like my Sanyo 4912. Coming close on getting rid of the cobra taps and doing as you've done.
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Offline Joe Sr.

  • Official Poobah of No Life.
  • *
  • Posts: 3076
  • Chicago - NORTH SIDE
    • View Profile
Re: Building a kegerator
« Reply #9 on: October 03, 2012, 02:55:44 PM »
Very nice! Looks just like my Sanyo 4912. Coming close on getting rid of the cobra taps and doing as you've done.

Me, too.  My problem is that I acquired two single tap towers, and I want a double tap tower.

I either need to sell/exchange or try to adapt.

Too many things to do, not enough time...

But the cobra taps work, so there is no harm in patience.
It's all in the reflexes. - Jack Burton

Offline DrewG

  • Brewer
  • ****
  • Posts: 359
  • Thread Killer
    • View Profile
Re: Building a kegerator
« Reply #10 on: October 04, 2012, 07:36:35 AM »
Quote
Too many things to do, not enough time...

Amen to that. There's a keg in it now with a cobra tap on it until I have the time to clean the kegerator lines and get it up and running  ::)

"Well, the Mexicans got a saying - what cannot be remedied must be endured."

-Barbarosa