Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Cleanup...  (Read 6154 times)

Offline anje

  • Assistant Brewer
  • ***
  • Posts: 232
  • Lafayette, IN
Cleanup...
« on: November 07, 2012, 07:51:33 am »
Bottled a batch last night, scraped out some of the yeast cake for future use. Then comes that annoying time to clean out the buckets and equipment. I threw them in the bathtub and filled them with oxyclean solution. Long-term, I'd rather not have to clean my equipment in the same space as my toilet. 

What do you all do?

Also, any suggestions about that white oxyclean film I get on everything? Even soaking my bottles in a bucket of Starsan (which turns cloudy the moment it hits my water) barely gets it off.  Can I add a bunch of vinegar to the water, or will that affect the beer flavor?
<-- microbiologist brewster n00b.

Hops and toothpaste don't mix.

Offline euge

  • I must live here
  • **********
  • Posts: 8017
  • Ego ceruisam ad bibere cervisiam
Re: Cleanup...
« Reply #1 on: November 07, 2012, 08:03:56 am »
How long are you soaking for? Days? If you are getting a film from soaking too long then you need to wipe it off. Oxyclean is just a cleanser you can get a soft sponge and wipe any residue away and rinse. And I wouldn't use Oxyclean on my bottles anyway. If they are that gunked up you should be rinsing them as you go. You have a procedural or bad habit problem.

Buy distilled water to mix your starsan. It will last for a very long time that way.
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Laws are spider-webs, which catch the little flies, but cannot hold the big ones. -Anacharsis

Offline weithman5

  • Senior Brewmaster
  • ******
  • Posts: 1681
  • naperville, il
Re: Cleanup...
« Reply #2 on: November 07, 2012, 08:12:24 am »
i usually will brew a 2nd or 3rd batch on top of the current yeast.  but when i clean it out i dump it down the disposal. use a plastic spatula to scrape the scale off and wash with dish soap and water.  i am usually cleaned up from one bottling session by the time my boil is done and cooled.
Don AHA member

Offline anje

  • Assistant Brewer
  • ***
  • Posts: 232
  • Lafayette, IN
Re: Cleanup...
« Reply #3 on: November 07, 2012, 08:13:18 am »
Just soaking for an hour or two, tops. The water here is seriously hard, though.

I do rinse as I go. My procedural problem is getting buddies to give me bottles. Last set had some nasty fuzzies in them, but I'm still too bottle-poor to throw them out.  That and living in an apartment that keeps having 6-inch slugs showing up indoors. 

After clean bottles have been sitting for a whie, I feel like I ought to clean them again. Maybe I'm just being obsessive?
<-- microbiologist brewster n00b.

Hops and toothpaste don't mix.

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Cleanup...
« Reply #4 on: November 07, 2012, 08:51:02 am »
Also, any suggestions about that white oxyclean film I get on everything?

When I lived in Lafayette I kept a spray bottle of isopropyl on hand.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline anje

  • Assistant Brewer
  • ***
  • Posts: 232
  • Lafayette, IN
Re: Cleanup...
« Reply #5 on: November 07, 2012, 09:13:50 am »
Also, any suggestions about that white oxyclean film I get on everything?

When I lived in Lafayette I kept a spray bottle of isopropyl on hand.
That sounds like a plan. Lafayette water is what I'm dealing with. And no, I don't brew with it -- tastes too nasty.
<-- microbiologist brewster n00b.

Hops and toothpaste don't mix.

Offline euge

  • I must live here
  • **********
  • Posts: 8017
  • Ego ceruisam ad bibere cervisiam
Re: Cleanup...
« Reply #6 on: November 07, 2012, 09:16:52 am »
I would cut off my "buddies" that didn't clean the bottles. If they don't respect what you are doing for them then they are out of the loop until they do.

Also, there is always a source for bottles even if you have to go looking in recycling bins to get them. Ask your neighbors for them...
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Laws are spider-webs, which catch the little flies, but cannot hold the big ones. -Anacharsis

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Cleanup...
« Reply #7 on: November 07, 2012, 09:32:48 am »
Also, any suggestions about that white oxyclean film I get on everything?

When I lived in Lafayette I kept a spray bottle of isopropyl on hand.
That sounds like a plan. Lafayette water is what I'm dealing with. And no, I don't brew with it -- tastes too nasty.

How much Oxiclean are you using?  I find 1-2 Tbsp. is plenty for a 7 gal. fermenter.  Using too much will exacerbate the film problem.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline anje

  • Assistant Brewer
  • ***
  • Posts: 232
  • Lafayette, IN
Re: Cleanup...
« Reply #8 on: November 07, 2012, 09:38:06 am »
Also, any suggestions about that white oxyclean film I get on everything?
How much Oxiclean are you using?  I find 1-2 Tbsp. is plenty for a 7 gal. fermenter.  Using too much will exacerbate the film problem.
More than that. Maybe 1/4 - 1/3 cup for a 6.5gal fermenter. (I've been figuring about a Tbsp per gal, which is a figure I picked up somewhere. Then fudging it a bit.)  Sounds like I'm overdoing it.
<-- microbiologist brewster n00b.

Hops and toothpaste don't mix.

Offline gmac

  • Brewmaster General
  • *******
  • Posts: 2165
  • London, Ontario
Re: Cleanup...
« Reply #9 on: November 07, 2012, 09:42:35 am »
I find that even though I'm generally lazy, cleaning right away helps tremendously.  For pails, I would fill them with water and wash them out right away.  I wouldn't soak them in the tub. Fill them with water and let them soak on their own if you have to soak them.  I just use water and a bit of oxy clean.  For bottles, I wash them  (+1 on having friends rinse them first!) and then just before I use them I give them a quick rinse with a bottle washer and then into star-san.  I wouldn't give them an oxy clean wash a second time.  I just sprinkle a tsp full or so into the bucket while the water fills.

I hate carboys with a passion compared to buckets when it comes to cleaning.  I only use them when I have to or when I'm using Brett.

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Cleanup...
« Reply #10 on: November 07, 2012, 09:46:16 am »
How much Oxiclean are you using?  I find 1-2 Tbsp. is plenty for a 7 gal. fermenter.  Using too much will exacerbate the film problem.
More than that. Maybe 1/4 - 1/3 cup for a 6.5gal fermenter. (I've been figuring about a Tbsp per gal, which is a figure I picked up somewhere. Then fudging it a bit.)  Sounds like I'm overdoing it.

Try cutting back.  It will reduce the film and save you some money.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline kylekohlmorgen

  • Senior Brewmaster
  • ******
  • Posts: 1363
  • Saint Louis, MO
    • The South House Pilot Brewery
Re: Cleanup...
« Reply #11 on: November 08, 2012, 10:51:41 am »
Also, any suggestions about that white oxyclean film I get on everything? Even soaking my bottles in a bucket of Starsan (which turns cloudy the moment it hits my water) barely gets it off.  Can I add a bunch of vinegar to the water, or will that affect the beer flavor?

Rinse with hot water in between cleaning with PBW/Oxiclean and sanitizing. PBW/Oxiclean is basic, StarSan is acidic, so if you don't rinse, you're neutralizing the Star-San. Star-San gets cloudy as it loses its effectiveness.
Twitter/Instagram: @southhousebrew

Recipes, Brett/Bacteria Experiments: http://SouthHouseBeer.com/

Offline khillje

  • Assistant Brewer
  • ***
  • Posts: 105
    • Twitter
Re: Cleanup...
« Reply #12 on: November 08, 2012, 11:05:34 am »
Post brew cleaning is almost as painful as pre brew cleaning.  After brewing, I honestly just spray everything down with a hose to make my pre brew cleaning easier.  I store all my keggles, buckets, etc in my shed, so I need a serious pre brew cleaning every time either way.  I'm looking forward to getting a plate chiller as my next upgrade, so while the warmer exit water leaves the plate chiller, I'll attach a long hose to clean all my equipment.  Also, with the film issue, I take steel wool to the inside of my keggles about every 4-5 brews before the oxyclean and starsan.  This is obviously only helpful with steel equipment.  Wouldn't want to scar up an plastic, etc.

Offline morticaixavier

  • I must live here
  • **********
  • Posts: 7781
  • Underhill VT
    • The Best Artist in the WORLD!!!!!
Re: Cleanup...
« Reply #13 on: November 08, 2012, 11:08:55 am »
Post brew cleaning is almost as painful as pre brew cleaning.  After brewing, I honestly just spray everything down with a hose to make my pre brew cleaning easier.  I store all my keggles, buckets, etc in my shed, so I need a serious pre brew cleaning every time either way.  I'm looking forward to getting a plate chiller as my next upgrade, so while the warmer exit water leaves the plate chiller, I'll attach a long hose to clean all my equipment.  Also, with the film issue, I take steel wool to the inside of my keggles about every 4-5 brews before the oxyclean and starsan.  This is obviously only helpful with steel equipment.  Wouldn't want to scar up an plastic, etc.

why do you starsan your keggles? I honestly only scrub my kettle with a nylon grain bag (just cause I have it out for scrubbing plastic buckets anyway) after each brew and only really hit it with PBW or whatever if the beerstone starts to build up.

I also use my chilling water to clean up. collect it in an empty bucket or my cooler mashtun
"Creativity is the residue of wasted time"
-A Einstein

"errors are [...] the portals of discovery"
- J Joyce

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27093
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Cleanup...
« Reply #14 on: November 08, 2012, 11:20:21 am »
I take steel wool to the inside of my keggles about every 4-5 brews

Man, when I tried that (once!) I scratched the crap out of them.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell