Author Topic: Starsan after BLC  (Read 1747 times)

Offline In The Sand

  • Brewer
  • ****
  • Posts: 397
    • View Profile
Starsan after BLC
« on: December 18, 2012, 02:49:16 PM »
Is it necessary? If you've cleaned your small parts and sanitized them, do you need to run Starsan through after BLC?
Trey W.

Offline a10t2

  • Official Poobah of No Life.
  • *
  • Posts: 3157
  • Ask me why I don't like Chico!
    • View Profile
    • SeanTerrill.com
Re: Starsan after BLC
« Reply #1 on: December 18, 2012, 03:18:12 PM »
No reason to sanitize twice. Wash, rinse, sanitize.

Star San isn't the best choice for lines though. You want something low-foaming.
Beer is like porn. You can buy it, but it's more fun to make your own.
http://seanterrill.com/category/brewing/

Offline In The Sand

  • Brewer
  • ****
  • Posts: 397
    • View Profile
Starsan after BLC
« Reply #2 on: December 18, 2012, 04:07:03 PM »
No reason to sanitize twice. Wash, rinse, sanitize.

Star San isn't the best choice for lines though. You want something low-foaming.

So is BLC a sanitizer, or a detergent?
Trey W.

Offline a10t2

  • Official Poobah of No Life.
  • *
  • Posts: 3157
  • Ask me why I don't like Chico!
    • View Profile
    • SeanTerrill.com
Re: Starsan after BLC
« Reply #3 on: December 18, 2012, 04:48:43 PM »
It's a caustic cleaner. There's probably a detergent/surfactant component, but I don't know offhand. I'd google the MSDS but I'm on my phone.
Beer is like porn. You can buy it, but it's more fun to make your own.
http://seanterrill.com/category/brewing/

Offline liquidbrewing

  • Brewer
  • ****
  • Posts: 283
  • OG - FG x 131= ABV%
    • View Profile
Re: Starsan after BLC
« Reply #4 on: December 18, 2012, 06:10:58 PM »
Not sure about Power Punch 22 (BLC), but some cleaners need an acid rinse afterwards to remove any residual cleaner.  Since Star San is phosphoric acid that should do you. 

I haven't had any BLC in a while, I have been using Oxiclean lately, but always run Star San behind it.

Justin
Liquid Brewing, Co.
"Find Your Own Level"

Offline beersk

  • Senior Brewmaster
  • ******
  • Posts: 1877
  • In the night!
    • View Profile
Re: Starsan after BLC
« Reply #5 on: December 19, 2012, 07:33:56 AM »
I've been wondering this as well, wondering if it's really necessary. Getting a little tired of wasting the CO2, opening and closing my kegs to refill with BLC, then StarSan...my process seems to be working fine, but if I don't need to run StarSan after BLC, then I don't want to bother with it. The instructions on the BLC bottle say to rinse with clean water, I think. So I run BLC, then water, then StarSan through. So if I can cut down on something there, I'd love to.
Watch out for those Cross Dressing Amateurs!

Online mtnrockhopper

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2878
  • Delaware
    • View Profile
Re: Starsan after BLC
« Reply #6 on: December 19, 2012, 08:13:40 AM »
I've heard from several people (probably on this forum) that don't sanitize after BLC. There probably isn't much that can survive a caustic cleaner!
Jimmy K

Delmarva United Homebrewers - President by inverse coup when the old president ousted himself.
AHA Member since 2006
BJCP: B0958

Online morticaixavier

  • Official Poobah of No Life.
  • *
  • Posts: 5677
  • Davis, CA
    • View Profile
    • The Best Artist in the WORLD!!!!!
Re: Starsan after BLC
« Reply #7 on: December 19, 2012, 08:42:36 AM »
I would worry that you are potentially re-introducing contaminants with the rinse water. yes the caustic probably killed everything in the line but what's in your tap water?

"Creativity is the residue of wasted time" - A. Einstein

Jonathan I Fuller

Offline beersk

  • Senior Brewmaster
  • ******
  • Posts: 1877
  • In the night!
    • View Profile
Re: Starsan after BLC
« Reply #8 on: December 19, 2012, 09:18:17 AM »
So there seems to be consensus that, no, don't sanitize after BLC...I take it the beer will just rinse it clean when you first tap and run the yeast crud out.
Watch out for those Cross Dressing Amateurs!

Offline In The Sand

  • Brewer
  • ****
  • Posts: 397
    • View Profile
Re: Starsan after BLC
« Reply #9 on: December 20, 2012, 07:52:41 AM »
I have typically rinsed lines with clean water, flushed several times with BLC and that's it.  I think I remembered reading on the BLC bottle that there was no need to rinse with water.  I have just been reanalyzing my sanitizing procedures and wanted to make sure I was doing it right.  Thanks all for the comments.
Trey W.

Offline tom

  • Senior Brewmaster
  • ******
  • Posts: 1110
  • Denver, CO
    • View Profile
Re: Starsan after BLC
« Reply #10 on: December 20, 2012, 09:56:37 AM »
I do the BLC, cold water rinse, StarSan regimen.  Doesn't take much.
Brew on

Offline Pinski

  • Senior Brewmaster
  • ******
  • Posts: 1556
  • Portland, Oregon
    • View Profile
Re: Starsan after BLC
« Reply #11 on: December 20, 2012, 11:22:43 AM »
I've been wondering this as well, wondering if it's really necessary. Getting a little tired of wasting the CO2, opening and closing my kegs to refill with BLC, then StarSan...my process seems to be working fine, but if I don't need to run StarSan after BLC, then I don't want to bother with it. The instructions on the BLC bottle say to rinse with clean water, I think. So I run BLC, then water, then StarSan through. So if I can cut down on something there, I'd love to.

I modified a 2 gallon garden sprayer (new) to use as my line cleaning tank. Just remove the wand and replace with a ball/pin lock post and your good to go.  It's light, no CO2 required and you can purge the lines with pressurized air at the end of a flush if you like as well. Maybe $30 in materials.
Thank you BEER!

Offline a10t2

  • Official Poobah of No Life.
  • *
  • Posts: 3157
  • Ask me why I don't like Chico!
    • View Profile
    • SeanTerrill.com
Re: Starsan after BLC
« Reply #12 on: December 20, 2012, 11:41:16 AM »
I modified a 2 gallon garden sprayer (new) to use as my line cleaning tank. ... Maybe $30 in materials.

If you aren't in a DIY mood, that's roughly what the commercial units cost. http://www.micromatic.com/draft-keg-beer/line-cleaning-cid-1084.html

*Never* use caustics without a thorough HOT water rinse. The solubility falls off sharply at low temperatures.
Beer is like porn. You can buy it, but it's more fun to make your own.
http://seanterrill.com/category/brewing/

Offline beersk

  • Senior Brewmaster
  • ******
  • Posts: 1877
  • In the night!
    • View Profile
Re: Starsan after BLC
« Reply #13 on: December 20, 2012, 01:45:34 PM »
I modified a 2 gallon garden sprayer (new) to use as my line cleaning tank. ... Maybe $30 in materials.

If you aren't in a DIY mood, that's roughly what the commercial units cost. http://www.micromatic.com/draft-keg-beer/line-cleaning-cid-1084.html

*Never* use caustics without a thorough HOT water rinse. The solubility falls off sharply at low temperatures.
Guess I'll keep doing what I'm doing then.
Watch out for those Cross Dressing Amateurs!

Offline Pinski

  • Senior Brewmaster
  • ******
  • Posts: 1556
  • Portland, Oregon
    • View Profile
Re: Starsan after BLC
« Reply #14 on: December 20, 2012, 03:24:41 PM »
I modified a 2 gallon garden sprayer (new) to use as my line cleaning tank. ... Maybe $30 in materials.

If you aren't in a DIY mood, that's roughly what the commercial units cost. http://www.micromatic.com/draft-keg-beer/line-cleaning-cid-1084.html

*Never* use caustics without a thorough HOT water rinse. The solubility falls off sharply at low temperatures.
Guess I'll keep doing what I'm doing then.
I didn't mean to suggest that you not rinse BLC,  just that some sort of manual air pump vessel would be easier to deal with than corny kegs for line cleaning and save CO2. 
Thank you BEER!