Author Topic: Rahr Base Malts and Bru'n Water  (Read 2603 times)

Offline mabrungard

  • Senior Brewmaster
  • ******
  • Posts: 1144
    • View Profile
    • Bru'n Water
Rahr Base Malts and Bru'n Water
« on: January 20, 2013, 12:28:01 PM »
As we know from several sources, Rahr base malts tend to produce a mash pH that is a couple of tenths lower than other similar base malts.  I just finished up a brew using a large percentage of Rahr 2-row Pale and was able to verify a corrective input for Bru'n Water that accounts for the higher acidity Rahr malt. 

I recommend increasing the color rating of the Rahr base malt by about 3 lovibond to account for the extra acidity.  For example, for a Rahr Pale malt with a color rating of 2 L, input the color rating as 5 L in Bru'n Water.  That will improve the accuracy of the mash pH prediction.

Enjoy!
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water

Offline denny

  • Administrator
  • I must live here
  • *****
  • Posts: 12074
  • Noti OR [1991.4, 287.6deg] AR
    • View Profile
    • Dennybrew
Re: Rahr Base Malts and Bru'n Water
« Reply #1 on: January 20, 2013, 02:06:52 PM »
Any ideas why Rahr is a lower pH?  Is it across their whole range of malts?
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

Offline mmitchem

  • Brewer
  • ****
  • Posts: 360
  • Suffolk, VA
    • View Profile
    • http://www.barfclub.org
Re: Rahr Base Malts and Bru'n Water
« Reply #2 on: January 20, 2013, 02:47:34 PM »
Wow, talk about a coincidence. I was just getting ready to buy a sack of Rahr Pale Ale Malt. Does it apply for the darker stuff as well (kinda like Denny asked)? Should I bump it up to around 6.5 L?
Michael P Mitchem
Beer and Ale Research Foundation (B.A.R.F.)
AHA Member since 2011

Offline mabrungard

  • Senior Brewmaster
  • ******
  • Posts: 1144
    • View Profile
    • Bru'n Water
Re: Rahr Base Malts and Bru'n Water
« Reply #3 on: January 27, 2013, 08:07:13 AM »
I don't know why their base malts produce this effect.  I just know that its true.  I don't know that the darker malts have that effect, but their limited percentage in most grists probably make that feature inconsequential. 

I've hypothesized that this is actually a good thing for most brewers since most of the county's water supplies are alkaline (see the alkalinity map that I posted on the Water Knowledge page at the Bru'n Water website).  So having a base malt that helps combat that alkaline water is likely to improve beers in which the brewer hasn't learned the fine points of mash pH adjustment.  So, its a win-win for the brewer and the maltster.  But for brewers that use a program like Bru'n Water, they need to know that Rahr malts are likely to drive their mash pH down a bit more than expected.  That isn't a bad thing, but it is something that the brewer should know about beforehand.  Bru'n Water is all about predicting and creating a desirable mash pH and beer outcome!
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water

Offline gandelf

  • Assistant Brewer
  • ***
  • Posts: 103
  • Mill Creek Brewery, Temptation Rd
    • View Profile
Re: Rahr Base Malts and Bru'n Water
« Reply #4 on: January 27, 2013, 08:47:52 AM »
Thanks Martin, is their a way to import the data form an older version of Bru'n Water into the current version? Or, is their a quicker way of accomplishing that, then by doing it manually?
Religion; A contrived security blanked for a species that is currently in its adolescent phase of its evolutionary journey.

Offline denny

  • Administrator
  • I must live here
  • *****
  • Posts: 12074
  • Noti OR [1991.4, 287.6deg] AR
    • View Profile
    • Dennybrew
Re: Rahr Base Malts and Bru'n Water
« Reply #5 on: January 27, 2013, 10:15:31 AM »
Maybe the fact that beers made with Rahr pale malt have a higher acidity is the reason I prefer to use it.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

Offline tomsawyer

  • Senior Brewmaster
  • ******
  • Posts: 1694
    • View Profile
Re: Rahr Base Malts and Bru'n Water
« Reply #6 on: January 29, 2013, 12:39:07 PM »
Assuming that the final beer pH is somewhat influenced by the mash pH, I wonder if the flavor of certain beers are enhanced by lower pH?  Like wine, too high of pH and its flabby.  I'm thinking the sharper flaovrs of citrusy hops might be enhanced by more acid, whereas a malt-forward beer might seem smoother at a higher pH.
Lennie
Hannibal, MO

Offline mabrungard

  • Senior Brewmaster
  • ******
  • Posts: 1144
    • View Profile
    • Bru'n Water
Re: Rahr Base Malts and Bru'n Water
« Reply #7 on: January 29, 2013, 02:26:02 PM »
Assuming that the final beer pH is somewhat influenced by the mash pH, I wonder if the flavor of certain beers are enhanced by lower pH?  Like wine, too high of pH and its flabby.  I'm thinking the sharper flaovrs of citrusy hops might be enhanced by more acid, whereas a malt-forward beer might seem smoother at a higher pH.

Not necessarily,  Higher pH helps accentuate hops since they are an 'acid'.  The alpha acids do present themselves more with slightly higher pH.  In last yea'rs Water Panel, Colin mentioned that he has noticed that low wort pH reduces the hop expression.  For that reason, I feel that maltier beers tend to present a little better with a slightly low wort pH.  I extrapolate that the reduction in the hop expression allows the malt to shine more and its crisper and cleaner.
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water

Offline tomsawyer

  • Senior Brewmaster
  • ******
  • Posts: 1694
    • View Profile
Re: Rahr Base Malts and Bru'n Water
« Reply #8 on: January 29, 2013, 03:32:34 PM »
Well, I had a 50:50 chance of being right.

Is the pKa of an alpha acid known?  That'd tell you if there is something going on as far as what species it is at what pH.
Lennie
Hannibal, MO

Offline tomsawyer

  • Senior Brewmaster
  • ******
  • Posts: 1694
    • View Profile
Re: Rahr Base Malts and Bru'n Water
« Reply #9 on: January 29, 2013, 03:36:10 PM »
Gave myself a nice GIMF thats Google It My Friend or something like that) and then found some pKas.  Not surprisingly the various acids have different pKas, some of the common ones are in the 4.5-6 pH range though.  So I suppose theres some possibility that we are affecting solubility, or flavor due to the form the acid is in.
Lennie
Hannibal, MO

Offline Kaiser

  • Global Moderator
  • Senior Brewmaster
  • *****
  • Posts: 1797
  • Imperial Brewing Geek
    • View Profile
    • braukaiser.com
Re: Rahr Base Malts and Bru'n Water
« Reply #10 on: January 30, 2013, 08:08:03 AM »
I have known about this issue for a while. It's not just Rahr 2-row that is a poor fit to the pH or acidity estimation based on malt color. Wheat malts tend to have a DI water pH closer to 6 and I once had a vienna malt that has a DI pH at 5.8.

That's a general limitation of all color based pH estimation (grist or beer color based). I just released the new water calculator for Brewer's Friend (http://www.brewersfriend.com/mash-chemistry-and-brewing-water-calculator) and in future releases we plan to integrate it with the recipe editor. That way we can keep pH properties of some malts, like Rahr or Weyermann, in the grain library and the tool doesn't have to estimate their pH from color.

Kai

Offline denny

  • Administrator
  • I must live here
  • *****
  • Posts: 12074
  • Noti OR [1991.4, 287.6deg] AR
    • View Profile
    • Dennybrew
Rahr Base Malts and Bru'n Water
« Reply #11 on: January 30, 2013, 08:54:13 AM »
Wow, that looks really nice, Kai.  I can't wait to look into it further.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

Offline Kaiser

  • Global Moderator
  • Senior Brewmaster
  • *****
  • Posts: 1797
  • Imperial Brewing Geek
    • View Profile
    • braukaiser.com
Re: Rahr Base Malts and Bru'n Water
« Reply #12 on: January 30, 2013, 08:57:10 AM »
Wow, that looks really nice, Kai.  I can't wait to look into it further.

Thanks. The only drawback is that you need internet to use it. I know you mentioned that this is an issue where you brew.

Kai

Offline denny

  • Administrator
  • I must live here
  • *****
  • Posts: 12074
  • Noti OR [1991.4, 287.6deg] AR
    • View Profile
    • Dennybrew
Re: Rahr Base Malts and Bru'n Water
« Reply #13 on: January 30, 2013, 10:13:37 AM »
Wow, that looks really nice, Kai.  I can't wait to look into it further.

Thanks. The only drawback is that you need internet to use it. I know you mentioned that this is an issue where you brew.

Kai

Yes, it is since I brew in a detached garage.  But I could use it in the house before I brew.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

Offline beersk

  • Senior Brewmaster
  • ******
  • Posts: 1952
  • In the night!
    • View Profile
Re: Rahr Base Malts and Bru'n Water
« Reply #14 on: January 30, 2013, 02:19:31 PM »
So this would go for Rahr Pilsner malt also, I take it...interesting find, I'm glad to know it!
Watch out for those Cross Dressing Amateurs!