Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Another noob question  (Read 4034 times)

Offline donredbull

  • 1st Kit
  • *
  • Posts: 18
Another noob question
« on: March 07, 2013, 01:27:46 pm »
So I made the mistake of racking my ale into a secondary fermenter. To late to do anything about that. But I have noticed that all activity has stopped in my air lock over the past few days. Do you guys think I would be safe to bottle at this point or should I test the gravity for a couple consecutive days and make sure that it doesnt change?

Offline dmtaylor

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4716
  • Lord Idiot the Lazy
    • YEAST MASTER Perma-Living
Re: Another noob question
« Reply #1 on: March 07, 2013, 01:29:43 pm »
Test gravity today, wait 3 days, test gravity again.  If it changed, wait another 3 days, and check again.  Once it stays the same over 3 days, it's ready to roll.  If you bottle too early, you can get bombs.
Dave

The world will become a much more pleasant place to live when each and every one of us realizes that we are all idiots.

Offline theDarkSide

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3041
  • Derry, NH
Another noob question
« Reply #2 on: March 07, 2013, 01:30:01 pm »
Definitely test the gravity for a couple days.  If it doesn't move and you're close to final gravity, bottle it up. 
Seacoast Homebrew Club - Portsmouth, NH
AHA Member
Stephen Mayo
------------------------------------------------

Offline Jimmy K

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3643
  • Delaware
Re: Another noob question
« Reply #3 on: March 07, 2013, 01:55:54 pm »
I agree with above.  How long was it in primary? 
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

Offline donredbull

  • 1st Kit
  • *
  • Posts: 18
Re: Another noob question
« Reply #4 on: March 07, 2013, 01:59:52 pm »
Thanks again for the help and it was in primary for 12 days

Offline Jimmy K

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3643
  • Delaware
Re: Another noob question
« Reply #5 on: March 07, 2013, 02:19:36 pm »
Thanks again for the help and it was in primary for 12 days
I'd still check the gravity, but that should have been plenty of time for fermentation. I doubt you hurt it at all.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

Offline garc_mall

  • Brewmaster
  • *****
  • Posts: 858
  • [1892.9, 294.9deg] AR Lynnwood, WA
Re: Another noob question
« Reply #6 on: March 07, 2013, 04:29:59 pm »
I agree with the "wait 3 days" Method. IMO, it is a waste of beer to check gravity more than twice at the end, and you need at least a couple days to make sure you have a stable gravity.

Also, the consensus is not that it is especially bad to transfer to secondary. The consensus is that transferring to secondary is only useful in certain circumstances (Usually fruit), and in other instances just doesn't provide much benefit for the hassle and chance of oxidation.

I know when I started brewing, I didn't have a blow off, so I was transferring to secondary so I could clean out my 6g carboy and put fresh wort in. I did 1 week primary (6g Carboy), 1 week secondary (5g Carboy), and then into bottles. Since I was brewing every week, and had only 2 carboys, I had to transfer just to clear space.

Offline Jeff M

  • Brewmaster
  • *****
  • Posts: 821
  • Currently upgrading to Brewery 3.0
Re: Another noob question
« Reply #7 on: March 07, 2013, 07:30:40 pm »
Ive had good luck with extracts doing the following.

Brew
7 days primary
Rack to secondary, 7 more days in secondary
check gravity, if close to estimated FG, prime and bottle.

ive had 0 bottle bombs

2c
Granite Coast Brewing Company.
Building a clone of The Electric Brewery to use as a pilot system for new recipes!

Offline skrag6713

  • Cellarman
  • **
  • Posts: 51
Re: Another noob question
« Reply #8 on: March 08, 2013, 03:47:45 pm »
there are all kinds of reasons to use a secondary fermentation: ciders, big beers that need to age for very long periods, anything you want ultra-clear like pilsners or cream ales.  i just bottled an amber ale that sat in primary for a month and secondary for two.  i racked it into my bottling bucket with my priming sugar solution and a package of rehydrated nottingham and it looks (and tastes) fantastic!

Offline donredbull

  • 1st Kit
  • *
  • Posts: 18
Re: Another noob question
« Reply #9 on: March 08, 2013, 11:37:27 pm »
Thanks again for the advice I am just scared of screwing my beer up.

Offline hellbound

  • Cellarman
  • **
  • Posts: 36
  • Beer Saved The World
Re: Another noob question
« Reply #10 on: March 13, 2013, 10:25:50 pm »
Thanks again for the advice I am just scared of screwing my beer up.

RDWHAHB!!! Beer is VERY forgiving, and a lot harder to screw up than you might think, especially if you're doing extract brews.

And even IF you do happen to screw it up slightly, it will still be beer, and therefore great cause you made it!
Dave
Maltose Falcon, San Fernando Valley Beer Lover
"Been drinking all the beer I can find since 1982"

Offline jamminbrew

  • Brewmaster
  • *****
  • Posts: 820
  • theAntipunk
Re: Another noob question
« Reply #11 on: March 13, 2013, 10:46:48 pm »
Ive had good luck with extracts doing the following.

Brew
7 days primary
Rack to secondary, 7 more days in secondary
check gravity, if close to estimated FG, prime and bottle.

ive had 0 bottle bombs

2c
I don't use a secondary any more, except for aging or adding fruits or other adjuncts. Current beliefs are that secondary fermenters are unnecessary. I leave my beers in the primary for 2-3 weeks, and once the gravity stops dropping, I'm there. Bottle time!
In caelo cerivisiae nil, hic igitur bibimus.

Offline Jimmy K

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3643
  • Delaware
Re: Another noob question
« Reply #12 on: March 14, 2013, 07:43:59 am »
Ive had good luck with extracts doing the following.

Brew
7 days primary
Rack to secondary, 7 more days in secondary
check gravity, if close to estimated FG, prime and bottle.
I hate to say you're wrong - but if it is not at FG and you rack to secondary, you're removing most of the yeast from the beer.  It may have worked so far, but it is begging for trouble.  Leave it in primary until it is at FG, then rack to secondary if you wish.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958