Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Carbonation taking "hold"  (Read 3418 times)

Offline andyi

  • Assistant Brewer
  • ***
  • Posts: 138
Carbonation taking "hold"
« on: March 19, 2013, 08:58:42 am »

Kegged 1st time. Set CO2 to 30 psi for 24hrs, turned down to 7 psi to serve.  First pour into picher, foamy but calmed down had good carbonation and head retention gas left at 7psi.  Second pour 1hr later carrbonation much flater low head retention. Has set co2 to 20psi and will check in 24 hours.

Question: how long does it take (and how do you know) for carbonation to take "hold" (I have heard 2 days to 2wks) and once it takes hold how long before it would need carbonation again. this is a 6.5 Abv beer sitting at 35-40 F and shooting for 3 vols.

Thanks

Offline HydraulicSammich

  • Assistant Brewer
  • ***
  • Posts: 186
  • Logan, UT
Re: Carbonation taking "hold"
« Reply #1 on: March 19, 2013, 10:01:18 am »
I prefer to be as simple as possible when force carbing.  I try to keep plenty of beers on tap at any one time so I am not overly anxious to pour a perfect beer in 24 hours.  Simply, keep your cooler so it dispenses at 38 to 45 degrees, or what you like.  Set keg pressure at 12 pounds or whatever your style wants.  Start with about 10 feet of line, 3/16 ID.  This will give you a nice slow, not overly foamy pour.  If it is too slow for you, cut a foot off and try again.  Most importantly, let the keg carb without fuss for a solid week and there you are.  There are tons of other ways to carb.  Shaking, kicking, rolling, bouncing. high pressure then low pressure then no pressure.  Big headache unless you know where you are going and how to get there.  Cheers!
AHA Member 900001775

Offline Jimmy K

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3643
  • Delaware
Re: Carbonation taking "hold"
« Reply #2 on: March 19, 2013, 10:08:52 am »
I prefer to be as simple as possible when force carbing.  I try to keep plenty of beers on tap at any one time so I am not overly anxious to pour a perfect beer in 24 hours.  Simply, keep your cooler so it dispenses at 38 to 45 degrees, or what you like.  Set keg pressure at 12 pounds or whatever your style wants.  Start with about 10 feet of line, 3/16 ID.  This will give you a nice slow, not overly foamy pour.  If it is too slow for you, cut a foot off and try again.  Most importantly, let the keg carb without fuss for a solid week and there you are.  There are tons of other ways to carb.  Shaking, kicking, rolling, bouncing. high pressure then low pressure then no pressure.  Big headache unless you know where you are going and how to get there.  Cheers!
Do this and you'll never need to "recarbonate".
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

Offline In The Sand

  • Brewer
  • ****
  • Posts: 398
Re: Carbonation taking "hold"
« Reply #3 on: March 19, 2013, 10:47:36 am »
I'll typically keg the beer, charge with 20 psi and shake the keg for a couple of minutes.  Then I set to serving pressure and leave for 2 weeks.  I like a well carbonated beer.  You'll also want to consider how much headspace you have in the keg.  If you ended up with 5.5 gallons in a 5-gallon corny keg, then you'll have to leave it longer on the gas to get the desired result.  Or you can pull off a pint or two every so often to reduce the headspace.  Also, my beer lines are about 4-5 feet long.  Ten feet seems a bit long IMO, but YMMV.
Trey W.

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Carbonation taking "hold"
« Reply #4 on: March 19, 2013, 10:52:06 am »
I don't think you can get a keg carbonated in 24 hours using head pressure, no matter how high it is. You can get there by leaving the keg at serving pressure for 7-10 days, or by setting it at serving pressure and shaking as often as possible for 1-2 days. It's just a question of how long you want to wait.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline davidgzach

  • Senior Brewmaster
  • ******
  • Posts: 1698
Re: Carbonation taking "hold"
« Reply #5 on: March 19, 2013, 10:54:11 am »
Go here:  http://www.kegerators.com/carbonation-table.php

If you are in a rush then kick, shake, rattle and roll however I'm personally not a fan.

Set it to the correct pressure and let it sit 3-4 days.  If I'm in a rush then I'll set to 30psi for a day, then bring it to serving pressure and sample.  Repeat as needed..... ;)

Dave
Dave Zach

Offline morticaixavier

  • I must live here
  • **********
  • Posts: 7781
  • Underhill VT
    • The Best Artist in the WORLD!!!!!
Re: Carbonation taking "hold"
« Reply #6 on: March 19, 2013, 11:16:03 am »
Go here:  http://www.kegerators.com/carbonation-table.php

If you are in a rush then kick, shake, rattle and roll however I'm personally not a fan.

Set it to the correct pressure and let it sit 3-4 days.  If I'm in a rush then I'll set to 30psi for a day, then bring it to serving pressure and sample.  Repeat as needed..... ;)

Dave

I am particularly fond of the sampling part. and the repeat part... repeat sampling that is  ;D
"Creativity is the residue of wasted time"
-A Einstein

"errors are [...] the portals of discovery"
- J Joyce

Offline Joe Sr.

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4467
  • Chicago - NORTH SIDE
Re: Carbonation taking "hold"
« Reply #7 on: March 19, 2013, 03:46:06 pm »
Second pour 1hr later carrbonation much flater low head retention.

You shouldn't lose carbonation in an hour.  Unless, maybe, if the gas was leaking out.

I don't pour pints too often, so I don't keep the gas hooked to my kegs.  I'll pull a pint or two using head pressure.  When the flow slows, I'll charge it back up.  I don't think the carbonation changes fast enough that you would notice the difference in the glass.
It's all in the reflexes. - Jack Burton

Offline Jimmy K

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3643
  • Delaware
Re: Carbonation taking "hold"
« Reply #8 on: March 19, 2013, 08:26:11 pm »
Second pour 1hr later carrbonation much flater low head retention.

You shouldn't lose carbonation in an hour.  Unless, maybe, if the gas was leaking out.

I don't pour pints too often, so I don't keep the gas hooked to my kegs.  I'll pull a pint or two using head pressure.  When the flow slows, I'll charge it back up.  I don't think the carbonation changes fast enough that you would notice the difference in the glass.
But if the head space had lots of pressure and you pour a pint, you'll get tons of carbonation coming out during the pour because of the fast pressure drop at the faucet. Later with normal pressure more CO2 will stay dissolved instead of forming bubbles.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958

Offline Joe Sr.

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4467
  • Chicago - NORTH SIDE
Re: Carbonation taking "hold"
« Reply #9 on: March 20, 2013, 07:59:04 am »
But if the head space had lots of pressure and you pour a pint, you'll get tons of carbonation coming out during the pour because of the fast pressure drop at the faucet. Later with normal pressure more CO2 will stay dissolved instead of forming bubbles.

I think you're describing exactly what the OP had happen.  If he charged it at 30 and didn't bleed it before pouring he had too much pressure for the first pour.  After the head pressure came down, the low carbonation of the beer became evident.

IME, two pints drawn an hour apart, properly carbonated, have no noticeable difference even using only head pressure to pour.  Head pressure should not be 30 psi.  You would probably notice a difference with two pitchers, but that would mostly be because you'd run out of pressure to pour unless you hooked the gas back up.
It's all in the reflexes. - Jack Burton

Offline dean_palmer

  • Cellarman
  • **
  • Posts: 84
    • The Beer Journals
Re: Carbonation taking "hold"
« Reply #10 on: March 20, 2013, 12:12:40 pm »
http://www.thebeerjournals.com/carbonation.html

That will get you pretty close, really quick.

Offline andyi

  • Assistant Brewer
  • ***
  • Posts: 138
Re: Carbonation taking "hold"
« Reply #11 on: March 21, 2013, 05:31:56 am »

Thanks for all the replies.  I have cranked down to 12 psi and wil check it in a week.