Author Topic: Final gravity again.  (Read 2146 times)

Offline FLbrewer

  • Brewmaster
  • *****
  • Posts: 673
    • View Profile
Final gravity again.
« on: May 18, 2013, 10:18:02 AM »
So I'm done! Everything is bottled and I sadly never took an OG reading (extract kit, states "O.G. is 1.043, ready in 4 weeks). Sat in primary for 2 weeks, took a reading today while bottling and I show a little higher than 1.010 unless I'm reading or wrong. Any idea what that means? I'd like to have a remote idea that my beer has 4-5% ABV. Pic below.
http://instagram.com/p/ZdhGrGx3aW/
« Last Edit: May 18, 2013, 10:21:34 AM by flbrewer »

Offline tygo

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2622
  • Sterling, VA
    • View Profile
Re: Final gravity again.
« Reply #1 on: May 18, 2013, 10:19:36 AM »
Assuming your OG was around 1.043 the ABV is about 4.3%.
Clint
Wort Hogs

Fermenting: Wit
On Tap: Lucifer's Hammer Golden Strong Ale, Dopplebock, Old Fuzzynut's Ale

Offline a10t2

  • Official Poobah of No Life.
  • *
  • Posts: 3207
  • Ask me why I don't like Chico!
    • View Profile
    • SeanTerrill.com
Re: Final gravity again.
« Reply #2 on: May 18, 2013, 11:38:02 AM »
Looks like an FG ~1.009 unless I'm misreading the hydrometer.

A good quick estimate (which will generally be within ±0.2% ABV) is: 131*(OG - FG) = 131*(1.043 - 1.009) = 4.5% ABV.

Balling's formula (more complicated but potentially more accurate, especially at high gravities) gives 4.4%.
Beer is like porn. You can buy it, but it's more fun to make your own.
http://seanterrill.com/category/brewing/

Offline euge

  • I must live here
  • **********
  • Posts: 7396
  • Estilo Casero
    • View Profile
Re: Final gravity again.
« Reply #3 on: May 24, 2013, 08:05:18 AM »
Sounds to me like your ferment went successfully. Remember that hitting the region of 1.010 is not always the signal that it is done. Depending on beer and yeast type and the extract and grain profile can give differing results. Some beers- even relatively low gravity finish around 1.020 and are perfect like that. It isn't necessarily an incomplete fermentation. Conversely, certain styles such as "Belgian" may be optimal finishing much lower than your current beer @ 1.009!
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman