Author Topic: How long for flameout hops?  (Read 830 times)

Offline yso191

  • Senior Brewmaster
  • ******
  • Posts: 1065
  • Yakima, WA
    • View Profile
How long for flameout hops?
« on: May 24, 2013, 02:21:05 PM »
I'm brewing and IPA today.  I intend to add 4 ounces at flameout for an aroma steep. 

1. How long should they steep before sending the wort to the plate chiller?
2.  Is this what is also referred to as a hop stand?

All Hands Brewing

Offline snowtiger87

  • Brewer
  • ****
  • Posts: 417
    • View Profile
Re: How long for flameout hops?
« Reply #1 on: May 24, 2013, 02:55:22 PM »
1. I put mine in at flame out, whirlpool (by hand) then let it rest for 10 minutes before going through the chiller. That takes about 15 minutes (for 10 gallons) so some of the wort is exposed to the hops for that additional time.

2. Not really familiar with that term.
Brewing since 1989 - BJCP National Rank

Fermenting: McChouffe clone, Samiclaus clone
Conditioning: Belgian Tripel, Barrel Aged Baltic Porter - in sherry barrel, Belgain Easter Ale
On tap: CAP, Dortmunder Export, IIPA, Dubbel Chocolate Stout, Wee Heavy, Whiskey barrel aged Wee Heavy, Baltic Porter
Newly Bottled:

Offline erockrph

  • Official Poobah of No Life.
  • *
  • Posts: 4086
  • Chepachet, RI
    • View Profile
    • The Hop WHisperer
Re: How long for flameout hops?
« Reply #2 on: May 24, 2013, 06:43:26 PM »
If its just a flameout addition I add them as soon as the boil stops then start chilling. But I use a cold water bath, so YMMV with a chiller.

A hop stand is when you let your flameout hops steep hot before starting your chilling. It can add a significant amount of IBUs, since alpha acids will continue to isomerize (albeit at a slower rate than at full boil). I generally stand for 30-90 minutes for hoppy styles. It adds a lot of hop flavor and aroma.
Eric B.

Finally got around to starting a homebrewing blog: The Hop Whisperer