Author Topic: Amount of water and IBU's  (Read 1152 times)

Offline FLbrewer

  • Brewmaster
  • *****
  • Posts: 592
    • View Profile
Amount of water and IBU's
« on: June 03, 2013, 12:56:34 PM »
I believe I read that IBU's can rise when you use more than x amount of water in an extract boil. How is this?

Offline dzlater

  • Brewer
  • ****
  • Posts: 376
  • New Jersey
    • View Profile
Re: Amount of water and IBU's
« Reply #1 on: June 03, 2013, 01:05:24 PM »
The theory is that higher gravity wort will have a lower level of hop utilazation.
So the thinner the wort the more bitterness one would get from the same amount of hops.
« Last Edit: June 03, 2013, 01:08:05 PM by dzlater »

Offline hubie

  • Assistant Brewer
  • ***
  • Posts: 234
    • View Profile
Re: Amount of water and IBU's
« Reply #2 on: June 04, 2013, 07:40:40 AM »
John Palmer has a nice table (Table 7) that shows hop utilization percentage as a function of boil time and wort gravity:  http://www.howtobrew.com/section1/chapter5-5.html

Pick a boil time, say 60 minutes.  You get about 28% utilization from your hops if boiling in a 1.030 solution whereas you only get about 18% if you were boiling in a 1.080 solution.  This isn't all that big a deal for people who do full-boils, but if you're doing partial boils using extract, this could become an effect you'd want to compensate for (in this example, you'd want to increase your 60-minute hops by about 50%).

Offline a10t2

  • Official Poobah of No Life.
  • *
  • Posts: 3163
  • Ask me why I don't like Chico!
    • View Profile
    • SeanTerrill.com
Re: Amount of water and IBU's
« Reply #3 on: June 04, 2013, 07:59:48 AM »
The other thing to keep in mind is that the solubility limit for alpha acids is around 100 IBU. So if you're doing a 3 gal boil and diluting to 5.5 gal, for example, you can never exceed 100*3/5.5 = 55 IBU, give or take. If you've developed a recipe that takes advantage of that without realizing it, switching it to a less dilute concentrated boil could result in increased bitterness.
« Last Edit: June 04, 2013, 08:19:36 AM by a10t2 »
Beer is like porn. You can buy it, but it's more fun to make your own.
http://seanterrill.com/category/brewing/

Offline morticaixavier

  • Official Poobah of No Life.
  • *
  • Posts: 5688
  • Davis, CA
    • View Profile
    • The Best Artist in the WORLD!!!!!
Re: Amount of water and IBU's
« Reply #4 on: June 04, 2013, 08:01:25 AM »
The other thing to keep in mind is that the solubility limit for alpha acids is around 100 IBU. So if you're doing a 3 gal boil and diluting to 5.5 gal, for example, you can never exceed 100*3/5.5 = 55 IBU, give or take. If you've developed a recipe that takes advantage of that without realizing it, switching it to a lessmore-dilute boil could result in increased bitterness.

fixed that for you. but the concept is there. if you dilute less post boil you will get better hop utilization
"Creativity is the residue of wasted time" - A. Einstein

Jonathan I Fuller

Offline a10t2

  • Official Poobah of No Life.
  • *
  • Posts: 3163
  • Ask me why I don't like Chico!
    • View Profile
    • SeanTerrill.com
Re: Amount of water and IBU's
« Reply #5 on: June 04, 2013, 08:19:58 AM »
Yeah, that. I've had coffee now. ::)
Beer is like porn. You can buy it, but it's more fun to make your own.
http://seanterrill.com/category/brewing/

Offline saintpierre

  • Brewer
  • ****
  • Posts: 402
  • Augusta, ME
    • View Profile
    • www.malthomebrewclub.org
Re: Amount of water and IBU's
« Reply #6 on: June 04, 2013, 08:35:57 AM »
This is one of the reasons extract brewers tend to add a majority of the extract with 5 or so minutes left in the boil to get a better hop utilization.
Mike St. Pierre
Maine Ale & Libation Tasters (MALT)
BJCP Recognized
[719.4, 74.1] AR

Offline FLbrewer

  • Brewmaster
  • *****
  • Posts: 592
    • View Profile
Amount of water and IBU's
« Reply #7 on: June 04, 2013, 09:53:08 AM »
This is one of the reasons extract brewers tend to add a majority of the extract with 5 or so minutes left in the boil to get a better hop utilization.
I've never done that, what am I missing?