SP - set mine to 42
Dif - 3
ASD - 10
OFS (temp offset) - 0 default setting (not sure what this does)
SF - not sure I got to this one yet.
I also have mine set to 42*
'SF' means Sensor failure, I set this to 0 (which = off)
'OFS' I have set to 0 (only applies to BIN operation)
'Asd' I have set to 1 (short cycle delay)
'diF' I have set to 1 (the cut in/cut out from the setpoint) This keeps the temperature from fluctuating too wildly.
Hope that helps!