Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Re pitching chico/1056 from local brewery  (Read 4244 times)

Offline quattlebaum

  • Brewer
  • ****
  • Posts: 370
    • Wildhops
Re pitching chico/1056 from local brewery
« on: May 21, 2013, 08:10:49 pm »
So i am affiliated with a local brew pub and occasionally get some yeast (1056) on the 5 to 6 generation when they getting ready to pitch to the next brew. So questions are. How much to pitch? I have been pitching around 100ml or so. It goes berserk! Also, how long do ya think it will last if kept at 35 degrees or so without having to do a starter. The head brewer says if kept cold you can just pitch slurry without a starter for up to a month. Any suggestions?

Offline gmac

  • Brewmaster General
  • *******
  • Posts: 2165
  • London, Ontario
Re: Re pitching chico/1056 from local brewery
« Reply #1 on: May 21, 2013, 08:18:05 pm »
Mr malty or yeastcalc and I'm sure a month will work if its pure. Maybe a quick starter to just get it refreshed.

Offline Thirsty_Monk

  • Brewmaster General
  • *******
  • Posts: 2514
  • Eau Claire WI
    • Lazy Monk Brewing
Re: Re pitching chico/1056 from local brewery
« Reply #2 on: May 21, 2013, 09:07:06 pm »
I agree with your head brewer.
Older yeast you have more slury you need to pitch.
Regular pitching rate would apply (1 liter of slury for 1 BBL of lager, 0.5 liter of slury for 1 BBL of ale).
We could also talk about yeast density but let's keep is simple.
Na Zdravie

Lazy Monk Brewing
http://www.lazymonkbrewing.com

Offline majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11334
  • Polka. If its too loud you're too young.
Re pitching chico/1056 from local brewery
« Reply #3 on: May 22, 2013, 02:00:39 am »
You are probably fine up to a month but the sooner you use it the better. I'd use MrMalty.com yeast calculator and put the yeast harvest date in there and go from there. You are better off slightly overpitching than underpitching, but try not to massively overpitch. You shouldn't need a starter if you use the yeast within a month, but again,the sooner you use it the better!

Offline davidgzach

  • Senior Brewmaster
  • ******
  • Posts: 1698
Re: Re pitching chico/1056 from local brewery
« Reply #4 on: May 22, 2013, 06:06:24 am »
I go by Sean's 25% viability loss per month for slurry and it works well for me.  Mr. Malty seems a little drastic.  But a month is a good barometer for making a starter IMO.

Dave
Dave Zach

Offline skyler

  • Brewmaster
  • *****
  • Posts: 956
  • Hmm. Human music. I like it.
Re: Re pitching chico/1056 from local brewery
« Reply #5 on: May 22, 2013, 12:15:02 pm »
I use 001 from a brewery all the time. It is usually very foamy, so after 2 days in the fridge the full jar appears half full or so. I generally use a pint of foamy slurry or a half pint of settled slurry per 5.5 gal batch under 1.065 and a little more for over 1.065. A friend always thinks we are overpitching, but my results are good.

I try to use it within 2 weeks, but haven't really had a problem with it ever (never used older than 6 weeks without just making a starter).

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Re pitching chico/1056 from local brewery
« Reply #6 on: May 22, 2013, 01:35:02 pm »
A friend always thinks we are overpitching, but my results are good.

I would say you're *massively* over-pitching, but Chico is so neutral you can get away with it. I would say that amount of packed slurry is somewhere in the range of 600-900 billion cells.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline skyler

  • Brewmaster
  • *****
  • Posts: 956
  • Hmm. Human music. I like it.
Re: Re pitching chico/1056 from local brewery
« Reply #7 on: May 24, 2013, 01:33:32 pm »
I regularly overpitch with slurry because I am concerned that there is break matter and hops in the slurry and that I have fewer cells than it appears. This is especially true with this brewery's yeast, which seemingly always comes from their IPA. But it is also true pretty often with my own beers. My wort chilling method tends to send a lot of trub to the fermenter and I NEVER wash yeast.

Offline ccfoo242

  • Brewmaster
  • *****
  • Posts: 808
  • I drank what? - Socrates
Re: Re pitching chico/1056 from local brewery
« Reply #8 on: May 28, 2013, 09:09:46 pm »
I vaguely recall from a podcast that had some of the White Labs people on it, they said that overpitching isn't a big deal as long as you don't harvest the yeast afterward. I don't recall the reason, I think it had to do with the amount of dead yeast that were starved from not enough resources.
Intra cervisiam est deus.

Offline Thirsty_Monk

  • Brewmaster General
  • *******
  • Posts: 2514
  • Eau Claire WI
    • Lazy Monk Brewing
Re: Re pitching chico/1056 from local brewery
« Reply #9 on: May 30, 2013, 07:23:42 am »
I vaguely recall from a podcast that had some of the White Labs people on it, they said that overpitching isn't a big deal as long as you don't harvest the yeast afterward. I don't recall the reason, I think it had to do with the amount of dead yeast that were starved from not enough resources.
I do not thing that this is correct.
Na Zdravie

Lazy Monk Brewing
http://www.lazymonkbrewing.com

Offline ccfoo242

  • Brewmaster
  • *****
  • Posts: 808
  • I drank what? - Socrates
Re: Re pitching chico/1056 from local brewery
« Reply #10 on: June 05, 2013, 06:06:50 pm »
I vaguely recall from a podcast that had some of the White Labs people on it, they said that overpitching isn't a big deal as long as you don't harvest the yeast afterward. I don't recall the reason, I think it had to do with the amount of dead yeast that were starved from not enough resources.
I do not thing that this is correct.

OK, I found where I heard that. Wrong about the reason, but right about it being ok as long as you don't harvest it.

If you go to the 2012 BJCP seminars (http://www.homebrewersassociation.org/pages/lets-brew/homebrewing-seminars/2012) and listen to Neva Parker's talk about "Fermentation Mythbusters", skip to about 28:20 in and she mentions why you shouldn't use too much yeast. Not because they are dead or starved for resources, something about yeast growth and new yeast generation for subsequent generations. So, as long as it's the last time you use the yeast you can over pitch, but don't harvest that yeast when done.
« Last Edit: June 05, 2013, 06:12:12 pm by ccfoo242 »
Intra cervisiam est deus.

Offline Thirsty_Monk

  • Brewmaster General
  • *******
  • Posts: 2514
  • Eau Claire WI
    • Lazy Monk Brewing
Re: Re pitching chico/1056 from local brewery
« Reply #11 on: June 07, 2013, 03:50:56 pm »
I vaguely recall from a podcast that had some of the White Labs people on it, they said that overpitching isn't a big deal as long as you don't harvest the yeast afterward. I don't recall the reason, I think it had to do with the amount of dead yeast that were starved from not enough resources.
I do not thing that this is correct.

OK, I found where I heard that. Wrong about the reason, but right about it being ok as long as you don't harvest it.

If you go to the 2012 BJCP seminars (http://www.homebrewersassociation.org/pages/lets-brew/homebrewing-seminars/2012) and listen to Neva Parker's talk about "Fermentation Mythbusters", skip to about 28:20 in and she mentions why you shouldn't use too much yeast. Not because they are dead or starved for resources, something about yeast growth and new yeast generation for subsequent generations. So, as long as it's the last time you use the yeast you can over pitch, but don't harvest that yeast when done.

I would agree that when you overpich you have less growth and older cell population offer FG is reached. If you grossly overpich you might not have growth at all.
Na Zdravie

Lazy Monk Brewing
http://www.lazymonkbrewing.com