Author Topic: Kegged 2 styles  (Read 842 times)

Offline beercheer4me

  • 1st Kit
  • *
  • Posts: 14
  • Brewing three years,
    • View Profile
    • Wabash Vally Fermation N Ale
Kegged 2 styles
« on: March 09, 2010, 07:15:20 PM »
First time kegging and I burped 3x @ 5psi then used 30 psi charged ,rolled keg over knee for 5 minutes ,purged and rechared for another 5 ,did this 3 times, beer was foamed up like crazy ,,well got up at 500 am and had a brain fart and though that ,,,,
I took the regulator gas line off and put in a sanditised Grawler and roll the kegs upright 4 differant times and when I shook each keg ,the CO2 roard out of the tube like crazy did this 4 times and then hooked everything back up and everything seemed Ok
Has anyone done this ?
It was my Birthday and got a later start at co2 ing my corney's
Just curious ?
ON TAP, Three Floyd's Gumball Head clone,Rye IPA,
Flanders Porter,Octoberfest Martzen Madness Lager
Brew Stand Clone Brutis Ten,25 ft cu Lager Box

Online euge

  • Official Poobah of No Life.
  • *
  • Posts: 7218
  • Estilo Casero
    • View Profile
Re: Kegged 2 styles
« Reply #1 on: March 10, 2010, 01:45:57 AM »
Pretty much.... ::)

Except I don't leave the co2 hooked up.

Leave about half a gallon (or more) head-space in the keg and it'll carb up real quick when shaking. Best done when cold...

IME just like a bottle or can that's been shaken. Let it sit for a while and it'll settle down and can be tapped and served nearly right away if you bring the psi down.

That being said I prime my kegs now- it's easier on the back. ;)
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman