Author Topic: Erlenmeyer Flask Size?  (Read 4968 times)

Offline kylekohlmorgen

  • Senior Brewmaster
  • ******
  • Posts: 1363
  • Saint Louis, MO
    • View Profile
    • The South House Pilot Brewery
Erlenmeyer Flask Size?
« on: July 03, 2013, 06:40:54 AM »
I am building a stir plate and looking at Erlenmeyer flasks.

My first instinct is to buy a 5L flask for high gravity starters and 10 gallon batches. Would this flask be too big for average-gravity, 5 gallon batches?

If I wanted to grow up a large pitch of yeast, could I just use a 1 gal growler?

Any makes/models I should stay away from? Pyrex brand is a bit more expensive, but the durability is fantastic.
Twitter/Instagram: @southhousebrew

Recipes, Brett/Bacteria Experiments: http://SouthHouseBeer.com/

Offline HydraulicSammich

  • Assistant Brewer
  • ***
  • Posts: 152
  • Logan, UT
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #1 on: July 03, 2013, 07:28:04 AM »
I use a StirStarter brand plate.  I always do 5 gal batches.  I have a 2, 4, and 5 L Erlenmeyer. My go to flask is the 4 L.  Most of the time the yeast I have immediate access to is one to two months old.  But, my 5 L always works just as well on this inexpensive but good plate.
AHA Member 900001775

Offline AmandaK

  • Senior Brewmaster
  • ******
  • Posts: 1848
  • Redbird Brewhouse
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #2 on: July 03, 2013, 07:37:47 AM »
I've grown tired of Erlenmeyer flasks breaking or cracking. I've had ones from the LHBS and Pyrex ones. I now use a glass cookie jar that I picked up for $4, that thing holds 3.5L and has lasted me longer than all of the Erlenmeyer flasks combined!  8)
Amanda Burkemper
KC Bier Meisters Education Director
BJCP Assistant Education Director
BJCP Master/Mead

Redbird Brewhouse - There's Always a Project
Our Homebrewed Wedding, AHA Article

Offline ns3580

  • 1st Kit
  • *
  • Posts: 5
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #3 on: July 03, 2013, 07:52:31 AM »
I have a 5L I use for everything from 5 to 15gal batches.  flexibility to do big pitches

Offline kylekohlmorgen

  • Senior Brewmaster
  • ******
  • Posts: 1363
  • Saint Louis, MO
    • View Profile
    • The South House Pilot Brewery
Re: Erlenmeyer Flask Size?
« Reply #4 on: July 03, 2013, 08:03:47 AM »
I've grown tired of Erlenmeyer flasks breaking or cracking. I've had ones from the LHBS and Pyrex ones. I now use a glass cookie jar that I picked up for $4, that thing holds 3.5L and has lasted me longer than all of the Erlenmeyer flasks combined!  8)

I was thinking that a mason jar would do just fine.
Twitter/Instagram: @southhousebrew

Recipes, Brett/Bacteria Experiments: http://SouthHouseBeer.com/

Offline Joe Sr.

  • Official Poobah of No Life.
  • *
  • Posts: 3697
  • Chicago - NORTH SIDE
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #5 on: July 03, 2013, 08:20:33 AM »
I've got a couple of flasks and a whole bunch of growlers that serve me well for starters.

If I need a really big pitch, I brew a smaller beer as a starter.

I've got a couple 3 or 4 gallon carboys that work well for small batch starter beers.  And for trying out new recipes.
It's all in the reflexes. - Jack Burton

Offline klickitat jim

  • Official Poobah of No Life.
  • *
  • Posts: 7042
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #6 on: July 03, 2013, 09:27:23 AM »
I have two plates and two 2000ml flasks. Use one for <big and both if doing >big or lagers

Offline thebigbaker

  • Brewmaster
  • *****
  • Posts: 721
  • Denver, CO
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #7 on: July 03, 2013, 09:30:04 AM »
I have a 5L I use for everything from 5 to 15gal batches.  flexibility to do big pitches

+1!  I was lucky enough to find a starter set on CL that had a 1L, 2L and 5L flasks to go along w/ a stir plate.  I only use the 5L flask and the 1L and 2L flasks are just collecting dust on my shelves. 
Jeremy Baker

"An escalator can never break: it can only become stairs. You should never see an Escalator Temporarily Out Of Order sign, just Escalator Temporarily Stairs. Sorry for the convenience." - Mitch Hedberg

Offline mabrungard

  • Senior Brewmaster
  • ******
  • Posts: 1787
    • View Profile
    • Bru'n Water
Re: Erlenmeyer Flask Size?
« Reply #8 on: July 03, 2013, 09:46:39 AM »
I have 2, 4, and 6L flasks.  Its the 6L that I use all the time.  Using the larger flask is better for even small starters since it provides a very large surface area for oxygen transfer to the wort.  I pump filtered air into the flask headspace to keep the oxygen content up and flush the CO2.  I find there is no need for a stone on the air line in this case and that helps avoid foaming. 

I do like Amanda's idea of using an alternative jar for starters.  Clearly, with a 6L flask, it will be crying time if I have a mistake with the flask. 
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water
https://www.facebook.com/pages/Brun-Water/464551136933908

Offline AmandaK

  • Senior Brewmaster
  • ******
  • Posts: 1848
  • Redbird Brewhouse
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #9 on: July 03, 2013, 10:05:03 AM »
I've grown tired of Erlenmeyer flasks breaking or cracking. I've had ones from the LHBS and Pyrex ones. I now use a glass cookie jar that I picked up for $4, that thing holds 3.5L and has lasted me longer than all of the Erlenmeyer flasks combined!  8)

I was thinking that a mason jar would do just fine.

I've used those as well. Problem was when I tried to find anything over 2qts - they got pretty expensive compared to the lowly cookie jar.
Amanda Burkemper
KC Bier Meisters Education Director
BJCP Assistant Education Director
BJCP Master/Mead

Redbird Brewhouse - There's Always a Project
Our Homebrewed Wedding, AHA Article

Offline klickitat jim

  • Official Poobah of No Life.
  • *
  • Posts: 7042
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #10 on: July 03, 2013, 10:13:50 AM »
Seems like anything would work but metal and can't have too domed of a bottom or the stir bar has trouble. If I ever break a flask I probably will replace it with something with a dished bottom

Offline hopfenundmalz

  • I must live here
  • **********
  • Posts: 7526
  • Milford, MI
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #11 on: July 03, 2013, 10:21:41 AM »
I've grown tired of Erlenmeyer flasks breaking or cracking. I've had ones from the LHBS and Pyrex ones. I now use a glass cookie jar that I picked up for $4, that thing holds 3.5L and has lasted me longer than all of the Erlenmeyer flasks combined!  8)

I was thinking that a mason jar would do just fine.
I like your cookie jar solution. Looks like a flat bottom, and pretty cheap.
I've used those as well. Problem was when I tried to find anything over 2qts - they got pretty expensive compared to the lowly cookie jar.
Jeff Rankert
Ann Arbor Brewers Guild, AHA Member, BJCP Certified
Home-brewing, not just a hobby, it is a lifestyle!

Offline AmandaK

  • Senior Brewmaster
  • ******
  • Posts: 1848
  • Redbird Brewhouse
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #12 on: July 03, 2013, 10:28:24 AM »
I like your cookie jar solution. Looks like a flat bottom, and pretty cheap.

I use the stir bars with the little ring in the middle : http://www.amazon.com/Scienceware-371100138-Magnetic-Integral-Diameter/dp/B002VBW5HW/ref=pd_sim_indust_7

That seems to mitigate any problems with the slightly convex bottom.
Amanda Burkemper
KC Bier Meisters Education Director
BJCP Assistant Education Director
BJCP Master/Mead

Redbird Brewhouse - There's Always a Project
Our Homebrewed Wedding, AHA Article

Offline Scot (one T)

  • Cellarman
  • **
  • Posts: 72
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #13 on: July 03, 2013, 10:41:42 AM »
  I have 2 2L and 1 5L .  The only flasks that I have had break in 10+ years, are the ones I've loaned out.  I use the 2L for most brews and the 5L for lagers and larger batches.
Scot Schaar
River's Edge Fermentation Society
St Paul Homebrewers Club
AHA Member
BJCP Beer and Mead Judge

Offline Jimmy K

  • Official Poobah of No Life.
  • *
  • Posts: 3646
  • Delaware
    • View Profile
Re: Erlenmeyer Flask Size?
« Reply #14 on: July 03, 2013, 12:59:21 PM »
Since you want to promote oxygen exchange, I don't think it can really be too big.
Delmarva United Homebrewers - President by inverse coup - former president ousted himself.
AHA Member since 2006
BJCP Certified: B0958