Author Topic: mini kegs  (Read 1977 times)

Offline gcam333

  • Cellarman
  • **
  • Posts: 48
    • View Profile
mini kegs
« on: March 16, 2010, 12:35:12 PM »
I am about to take the plunge into home brewing. For more than one reason I am not ready to go full bore kegging. What are the
+ -  of the mini keg systems that are out there. Volume wise space wise this seems like a fit for me.
All help is much appreciated.

Offline tygo

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2622
  • Sterling, VA
    • View Profile
Re: mini kegs
« Reply #1 on: March 16, 2010, 02:26:58 PM »
I have a bunch of 5L mini-kegs.  I've only used them a couple of times.  They're hard to keep pressurized, at least with the tap assembly I have.  I've found that once I tap one I need to drink it pretty quick.  From a quick search it looks like there might be better tap assemblies out there but they seem kind of pricey for what you're getting.

I've only really used them for beers that didn't really turn out the way I wanted them to but are still drinkable.  Instead of going through the hassle of bottling for a beer I'm not crazy about but don't want to dump just yet I'll throw them in the minis.  Also, if I make a 5 gallon starter beer that I want to drink I might mini-keg it.  I'm planning one of those now actually and the plan is to use the minis.

But generally until I get around to investing in a keg system any beer worth keeping is going into bottles.
Wort Hogs

Offline euge

  • I must live here
  • **********
  • Posts: 8022
  • Ego ceruisam ad bibere cervisiam
    • View Profile
Re: mini kegs
« Reply #2 on: March 17, 2010, 06:47:53 AM »
There are 2.5 & 3 gallon cornie kegs out there. Pricey for sure but with these you could transition to 5 gallon kegs seamlessly when you are ready.

I have each of the above, being in a similar situation once. Plus, they are perfect for parties and portable cooler kegerators.
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Laws are spider-webs, which catch the little flies, but cannot hold the big ones. -Anacharsis

Offline mthogan1997

  • Cellarman
  • **
  • Posts: 25
    • View Profile
Re: mini kegs
« Reply #3 on: March 18, 2010, 12:41:39 AM »
I had the 5L mini kegs and thought they would be a great way to ease myself into kegging. I hated them.

For me it was a half a$$ed solution that produced half a$$ed results.

Offline skyler

  • Brewmaster
  • *****
  • Posts: 826
  • Hmm. Human music. I like it.
    • View Profile
    • Brewing After Law School
Re: mini kegs
« Reply #4 on: March 19, 2010, 02:23:38 AM »
I would stick to bottling until you make the move into all-grain, or you're brewing more than once a month, or in some other determine that you are not going to leave the hobby. Basic kegging (no kegerator, just a keg or 2 and a 5lb co2 tank), is reasonably cheap, and you can always just chill the kegs when you need them, if space is your problem.

Offline howie

  • 1st Kit
  • *
  • Posts: 5
    • View Profile
Re: mini kegs
« Reply #5 on: March 22, 2010, 07:13:44 PM »
I had the TapADraft and liked it pretty well. I always bottled some and put some in the TAD. It worked pretty much as advertised, though I never was able to pull off the force carbing thing.

I didn't use it all that long, as I got a free CO2 tank and regulator. That let me move up to full kegging. If not for the free stuff, I would have happily continued using the TAD for a while.

Most everyone would tell you to save your money and just get a full kegging setup. That's fine, but the true cost of kegging is quite a bit more than just the cost of the initial kegging setup. Also, some people just don't have the space!