There was an article in the Nov. 2013 BYO on the differences in a crystal and cara malt that might help. I can't remember if the topic of cara-red came up.
I did some research on this for the book. The differences are very slight differences in process that produce very slightly different flavors. Here's an excerpt...
"Crystal malts are typically produced at colors of 20L, 30L, 40L, 60L, 80L, 90L, and 120L. The exact colors available will vary depending on the maltster. When you look at crystal malt, you’ll notice that it’s a mix of lighter and darker grains. The color is specified by an average of the grain colors.
It has also been claimed that the use of crystal malts slows oxidative reactions in beer and improves its stability by preventing the formation of oxidized flavors.
Here’s a description of the similarities and differences from Dave Kuske, Director of Malting Operations at Briess Malt & Ingredients Co.
“Q: What's the difference between Caramel and Crystal Malts?
A: Dave Kuske, our Director of Malting Operations, explains it this way.
The difference between Caramel and Crystal malts involves both terminology and chemistry and production differences.
As for terminology, the European maltsters landed on crystal malt as the descriptor of malts that go through a conversion step where starches are rapidly (typically within 45 minutes) converted to sugars and the sugars are then crystallized at high temperatures in a roaster. Somewhere in our distant past, it was decided that our crystal style malts produced in the same manner were given the name caramel Malt.
The term caramel really refers to the process of pyrolisis of sugars. When I give presentations on the process, I encourage the audience to envision a candy thermometer. There are different temperature "breaks" where different "types" of caramel are produced and each have unique and very different physical and flavor properties. Crystal style malt is in reality the end process of achieving high enough temperatures to produce a 'hard crack' type caramel inside of each malt kernel, which results in a hard glassy endosperm. This crystallization lends unique properties to the flavor and functionality of the malt. In order to achieve crystallization, the actual kernel temperature must exceed 300ºF, which requires much higher applied temperatures only achievable using a roaster, which has the burner capacity to reach in excess of 700+ºF if needed.
There are Caramel malts on the market that are produced using a kiln. The green malt is heated at minimal airflow and is held at high moisture content for an extended period of time (more like hours than minutes) on the upper kiln to "stew" the malt to allow the enzymes to break the starches into sugars. It is a tricky step on the kiln because it is difficult to get the wet malt heated up to the enzyme optimum temperatures (60-70ºC or 140-158ºF) without drying the malt in the process, which slows the enzymatic breakdown. I liken it to trying to heat up a wet bath towel. After stewing, the malt is heated at the highest temperature possible on the kiln, which is not hot enough to actually crystallize the sugars due to maximum temperature limitations on the kiln. In most cases, 220-240ºF burner temperature is as high as one can achieve on a kiln, which falls far short of crystallization temperature of the predominant sugars. There is some caramelization that occurs at the lower temperatures, but the majority of the color and flavor development is due to the Maillard reaction (sugar + amino acid) which provides a different flavor profile and a mealy/powdery endosperm."