Membership questions? Log in issues? Email

Author Topic: Looking for some feedback  (Read 6398 times)

Offline Jeff M

  • Brewmaster
  • *****
  • Posts: 821
  • Currently upgrading to Brewery 3.0
Re: Looking for some feedback
« Reply #15 on: January 04, 2014, 02:32:31 pm »
I got SS tubing out of NY. For 100 gal I used 50 feet and for 350 gal I used 100 feet. Fittings are from McMaster.

I have my element hex nut welded to the BK.
starsan is fine for hand sanitizing.
Saniclean is fine when pump Is involved.

I do not have a good caustic solution.
I use acid cleaner 5 and star line for brites and it looks good.
I tried PBW and hd caustic in BK with mixed results.

Ok thanks Leos, if i go plastic ill probbaly hit you up for idea and part numbers.  Do you use the same chemicals on your Plastic as you do on your SS?

I personally like PBW.  I put it in hot and let it soak for a few minutes and then give it a good scrub.

Have any of you Pros been tempted to take a Welding class?  There is one locally that i could take for about 600$.  it goes over all types of welding.  Ive read posts by people putting together breweries they wished they knew how to weld but looking for an affirmative here.

Granite Coast Brewing Company.
Building a clone of The Electric Brewery to use as a pilot system for new recipes!