Author Topic: Bru Gear - New Kettle/ Conical Manufacturer  (Read 3382 times)

Offline thebigbaker

  • Brewmaster
  • *****
  • Posts: 721
  • Denver, CO
    • View Profile
Bru Gear - New Kettle/ Conical Manufacturer
« on: February 04, 2014, 11:04:13 AM »
I just stumbled upon this Kickstarter project from Bru Gear.  Their kettles and fermenters look good and seem to be at reasonable pricing.  I haven't done so yet, but I'm thinking about pulling the trigger on one of the kettles.  According to Homebrew Finds, sounds like delivery of the kettles is estimated for June.

https://www.kickstarter.com/projects/2055692701/bru-gear-stainless-steel-brewing-kettles-and-ferme
Jeremy Baker

"An escalator can never break: it can only become stairs. You should never see an Escalator Temporarily Out Of Order sign, just Escalator Temporarily Stairs. Sorry for the convenience." - Mitch Hedberg

Offline dsmitch19

  • Cellarman
  • **
  • Posts: 47
    • View Profile
    • ASH
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #1 on: February 04, 2014, 01:40:34 PM »
I'm in the same homebrew club as Phil, the founder/owner/partner/whatever pf Bru Gear. The Bru Gear products are awesome. Very high quality similar to and some will say exceeding Blichmann. If I had the money and space, I would be buying the full 1BBL system. For now, I'm trying to see if I can scrounge up the $995 to get the set of 20 gallon kettle/HLT/tun so I can use them on a nice system later.

These prices are really a steal for this high of quality and Phil is a genuine stand up guy. If you find products you like and have the funds, I'd highly encourage you to pull the trigger.
Cheers!
Dennis Mitchell
BJCP Master Judge + Mead Judge
Arizona Society of Homebrewers Board Member at Large

Offline Jeff M

  • Brewmaster
  • *****
  • Posts: 821
  • Currently upgrading to Brewery 3.0
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #2 on: February 04, 2014, 04:44:15 PM »
His stuff looks nice, id be interested in checking out a conical but i dont see much info about them on the kickstarter page.
Granite Coast Brewing Company.
Building a clone of The Electric Brewery to use as a pilot system for new recipes!

Online morticaixavier

  • I must live here
  • **********
  • Posts: 7395
  • Underhill VT
    • View Profile
    • The Best Artist in the WORLD!!!!!
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #3 on: February 04, 2014, 04:56:57 PM »
Man if I had nine grand sitting around he'd have one donor for sure. Heck if I had 4500 bucks with nothing better to do...
"Creativity is the residue of wasted time"
-A Einstein

Offline nekojin

  • 1st Kit
  • *
  • Posts: 1
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #4 on: February 04, 2014, 05:06:32 PM »
Phil has some great stuff and an amazing reputation around the Phoenix area. If you need to see any of his products just send him a message, he has been incredibly responsive to any questions I've had and made modifications like adding in the whirlpool ports to all 3 brewhouses with nothing more than a simple request.

If you've got the cash for any of his products it's well worth it. I've been working out the logistics of opening up a brewery in the area and his project has allowed me to lower my opening costs significantly, I just pulled the trigger on his 3 BBL system.

Offline Jeff M

  • Brewmaster
  • *****
  • Posts: 821
  • Currently upgrading to Brewery 3.0
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #5 on: February 04, 2014, 05:36:36 PM »
I went in for a 14g Conical.  They look nice, but time will tell for this dubious East Coast boy:D
Granite Coast Brewing Company.
Building a clone of The Electric Brewery to use as a pilot system for new recipes!

Offline Jeff M

  • Brewmaster
  • *****
  • Posts: 821
  • Currently upgrading to Brewery 3.0
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #6 on: February 05, 2014, 02:40:44 PM »
Looks like he is going to hit his goal,  get in now while you can:)
Granite Coast Brewing Company.
Building a clone of The Electric Brewery to use as a pilot system for new recipes!

Offline flbrewer

  • Senior Brewmaster
  • ******
  • Posts: 1665
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #7 on: February 05, 2014, 03:44:53 PM »
Looks like he is going to hit his goal,  get in now while you can:)

I believe you can still donate and receive the prizes after funding as long as it's reached.

Offline Steve in TX

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2950
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #8 on: February 05, 2014, 04:27:30 PM »
Sometimes campaigns will add a bonus if they hit their plan with loads of time left.

Offline euge

  • I must live here
  • **********
  • Posts: 7593
  • Estilo Casero
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #9 on: February 06, 2014, 08:20:18 AM »
Man that is nice stuff! Very tempted to redo my brewery and go with an induction HERMS. Though I'm not sure if the induction element is included.
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Be Sure To Vote Jonathan Fuller for Governing Committee!

Offline dkfick

  • Brewmaster
  • *****
  • Posts: 938
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #10 on: February 06, 2014, 09:19:19 AM »
with induction there isn't really an element.  You would need an induction stovetop or induction cooktop to use induction to heat the kettle.  I did sign up for one of his induction kettles.  Basically it has a piece of iron sandwiched between 2 layers of stainless steel on the bottom of the kettle.  The induction cooktop would then heat that piece of iron directly and the heat would rise and be passed to the wort in the kettle.
BJCP A0936 National Beer Judge and Mead Judge
Cicerone Certified Beer Server
AHA Member
CRAFT Homebrew Club
Sons of Liberty Homebrew Club
HBT "mors"

Offline Jeff M

  • Brewmaster
  • *****
  • Posts: 821
  • Currently upgrading to Brewery 3.0
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #11 on: February 06, 2014, 09:39:04 AM »
Man that is nice stuff! Very tempted to redo my brewery and go with an induction HERMS. Though I'm not sure if the induction element is included.

Phil is very quick at answering questions and is quite infromative.  Send him an email via his brugear website and he will contact you:)  His kickstarter is also very sensitve to feedback so hes been changing things to fit his customers needs etc.
Cheers,
Jeff
Granite Coast Brewing Company.
Building a clone of The Electric Brewery to use as a pilot system for new recipes!

Offline euge

  • I must live here
  • **********
  • Posts: 7593
  • Estilo Casero
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #12 on: February 06, 2014, 09:46:43 AM »
I understand how induction works. I guess a better question is whether we supply the "cooktop" or is it included. I'm kinda reading this as induction capable. An email is in order...
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Be Sure To Vote Jonathan Fuller for Governing Committee!

Offline dkfick

  • Brewmaster
  • *****
  • Posts: 938
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #13 on: February 06, 2014, 09:48:16 AM »
Ah.  Yeah I assume no cooktop is included.
BJCP A0936 National Beer Judge and Mead Judge
Cicerone Certified Beer Server
AHA Member
CRAFT Homebrew Club
Sons of Liberty Homebrew Club
HBT "mors"

Offline fishhyren11

  • 1st Kit
  • *
  • Posts: 1
    • View Profile
Re: Bru Gear - New Kettle/ Conical Manufacturer
« Reply #14 on: February 06, 2014, 12:19:49 PM »
Looks pretty cool, I got in about a week ago- I went in for a 14gal fermenter.
His work looks pretty nice, hoping this goes through!