Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: WY1056 @ 42 degrees  (Read 4710 times)

Online majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11336
  • Polka. If its too loud you're too young.
WY1056 @ 42 degrees
« on: February 21, 2014, 09:57:10 am »
Problem with switch on one of my glycol lines. WY1056 active fermentation @ 42 degrees. No kdding.

Online majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11336
  • Polka. If its too loud you're too young.
Re: WY1056 @ 42 degrees
« Reply #1 on: February 21, 2014, 10:02:29 am »




Bucket bubbling like crazy, not sure if the picture explains that well.

Offline HoosierBrew

  • I must live here
  • **********
  • Posts: 13031
  • Indianapolis,IN
Re: WY1056 @ 42 degrees
« Reply #2 on: February 21, 2014, 10:06:11 am »
Whoa.  I knew it went low (upper 50s) - not that low.
Jon H.

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27137
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: WY1056 @ 42 degrees
« Reply #3 on: February 21, 2014, 10:08:21 am »
I'm not real surprised..only a little!  I've gotten blowoff with 1728 at 45F.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Online majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11336
  • Polka. If its too loud you're too young.
Re: WY1056 @ 42 degrees
« Reply #4 on: February 21, 2014, 10:14:35 am »
I thought about trying to warm it up with a hot water loop through the jacket but I'll probably just wait and see how far it goes on its own. Having to tare out glycol lines is a PITA.

Offline troybinso

  • Brewer
  • ****
  • Posts: 475
Re: WY1056 @ 42 degrees
« Reply #5 on: February 21, 2014, 10:23:01 am »
I thought about trying to warm it up with a hot water loop through the jacket but I'll probably just wait and see how far it goes on its own. Having to tare out glycol lines is a PITA.

I would suggest warming it up. Even though it is going now, it will slow way down and probably underattenuate.

If you do open up the glycol lines, be sure to put a "t" on it and plug it off, or put a valve on it. Then it is easy to get back in there next time.

Online majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11336
  • Polka. If its too loud you're too young.
Re: WY1056 @ 42 degrees
« Reply #6 on: February 21, 2014, 10:24:54 am »

I thought about trying to warm it up with a hot water loop through the jacket but I'll probably just wait and see how far it goes on its own. Having to tare out glycol lines is a PITA.

I would suggest warming it up. Even though it is going now, it will slow way down and probably underattenuate.

If you do open up the glycol lines, be sure to put a "t" on it and plug it off, or put a valve on it. Then it is easy to get back in there next time.

I'll be surprised if it isn't in the mid 50s by tomorrow.

Offline troybinso

  • Brewer
  • ****
  • Posts: 475
Re: WY1056 @ 42 degrees
« Reply #7 on: February 21, 2014, 10:44:54 am »
I guess it depends on your ambient temperature.

Offline ynotbrusum

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4888
Re: WY1056 @ 42 degrees
« Reply #8 on: February 21, 2014, 12:50:01 pm »
I found some stress related off flavors once fermenting with US-05 below 50F.  Just some estery, clovey flavor, but it could have been overpitching related.

I wish you well!  If it turns out good, let us know.  You might have found a new style of beer - lagerale.   ;)
Hodge Garage Brewing: "Brew with a glad heart!"

Online majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11336
  • Polka. If its too loud you're too young.
Re: WY1056 @ 42 degrees
« Reply #9 on: February 21, 2014, 01:33:04 pm »

I guess it depends on your ambient temperature.

Well, after all day and not raising a degree I decided I better raise this damn temp.

Online majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11336
  • Polka. If its too loud you're too young.
Re: WY1056 @ 42 degrees
« Reply #10 on: February 21, 2014, 01:33:45 pm »

I found some stress related off flavors once fermenting with US-05 below 50F.  Just some estery, clovey flavor, but it could have been overpitching related.

I wish you well!  If it turns out good, let us know.  You might have found a new style of beer - lagerale.   ;)

This is a contract brew so I don't really have the luxury of experimenting. That said, I've had this happen before and never experienced those flavors. Not quite this cold, but below 50.

Offline morticaixavier

  • I must live here
  • **********
  • Posts: 7781
  • Underhill VT
    • The Best Artist in the WORLD!!!!!
Re: WY1056 @ 42 degrees
« Reply #11 on: February 21, 2014, 02:04:48 pm »

I found some stress related off flavors once fermenting with US-05 below 50F.  Just some estery, clovey flavor, but it could have been overpitching related.

I wish you well!  If it turns out good, let us know.  You might have found a new style of beer - lagerale.   ;)

This is a contract brew so I don't really have the luxury of experimenting. That said, I've had this happen before and never experienced those flavors. Not quite this cold, but below 50.

did you get the magical apple/pear ester that it supposedly produces at low temps?
"Creativity is the residue of wasted time"
-A Einstein

"errors are [...] the portals of discovery"
- J Joyce

Offline kylekohlmorgen

  • Senior Brewmaster
  • ******
  • Posts: 1363
  • Saint Louis, MO
    • The South House Pilot Brewery
Re: WY1056 @ 42 degrees
« Reply #12 on: February 21, 2014, 02:30:06 pm »
did you get the magical apple/pear ester that it supposedly produces at low temps?

acetaldehyde?
Twitter/Instagram: @southhousebrew

Recipes, Brett/Bacteria Experiments: http://SouthHouseBeer.com/

Offline pinnah

  • Senior Brewmaster
  • ******
  • Posts: 1323
  • Wesloper, CO
Re: WY1056 @ 42 degrees
« Reply #13 on: February 21, 2014, 02:43:44 pm »
I thought the mystery flavor was the peach/bubblegum? :-*

Major, what exactly is a "contract brew"?  Brewing for another brewery?

Online majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11336
  • Polka. If its too loud you're too young.
Re: WY1056 @ 42 degrees
« Reply #14 on: February 21, 2014, 02:50:36 pm »


I found some stress related off flavors once fermenting with US-05 below 50F.  Just some estery, clovey flavor, but it could have been overpitching related.

I wish you well!  If it turns out good, let us know.  You might have found a new style of beer - lagerale.   ;)

This is a contract brew so I don't really have the luxury of experimenting. That said, I've had this happen before and never experienced those flavors. Not quite this cold, but below 50.

did you get the magical apple/pear ester that it supposedly produces at low temps?

Guess not. Got it warmed up to low 60s. Actually, actually turned out great.

We contract brew for a "brew pup" in town.