Author Topic: Upgrade!!!  (Read 1269 times)

Offline scarecrow

  • Cellarman
  • **
  • Posts: 78
    • View Profile
Upgrade!!!
« on: August 26, 2016, 02:56:38 PM »
Well got the new beer fridge.  Everything is now hooked up.  I decide to go all internal. So I know the gas pressure is going to be lower reading now on the Guage. Any ideas on what would be a good psi for 2 pony kegs With a 4 ft liquid line would be? Here are some pics and the taps are an old set of motorcycle grips.

Sent from my SM-G930T using Tapatalk


Offline Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6672
    • View Profile
Re: Upgrade!!!
« Reply #1 on: August 26, 2016, 03:02:20 PM »
Pressure is determined by desired level of carbonation and temperature. I have mine at 15psi/45°F. This would be way too high for 4 feet of line. I think you should replace the line with minimum 8 feet, if it's too much you can trim it down.

The chart below will help you determine the pressure needed. Calculators exist to help with line length as well.