Author Topic: Foam pattern in pint  (Read 1143 times)

Offline beersk

  • Brewmaster General
  • *******
  • Posts: 2316
  • In the night!
    • View Profile
Re: Foam pattern in pint
« Reply #15 on: April 23, 2014, 11:58:23 AM »
Alright, well you guys are making me feel better about it. I just wonder if it has anything to do with the malt or my mashing process. Or worse, an infection. I can't taste anything off, but I can't help but wonder sometimes.
Go big AND go home.

Jesse

Online Joe Sr.

  • Official Poobah of No Life.
  • *
  • Posts: 3099
  • Chicago - NORTH SIDE
    • View Profile
Re: Foam pattern in pint
« Reply #16 on: April 23, 2014, 12:12:54 PM »
IME, if you keep searching for an off flavor you'll find something.  Whether it is there or not.

I would not worry about the foamy floaty stuff. 
It's all in the reflexes. - Jack Burton

Offline beersk

  • Brewmaster General
  • *******
  • Posts: 2316
  • In the night!
    • View Profile
Re: Foam pattern in pint
« Reply #17 on: April 23, 2014, 01:00:31 PM »
IME, if you keep searching for an off flavor you'll find something.  Whether it is there or not.

I would not worry about the foamy floaty stuff. 
Ain't that the truth...ugh. I need to learn to stop searching so hard for faults and just enjoy the beer.

« Last Edit: April 23, 2014, 02:51:24 PM by beersk »
Go big AND go home.

Jesse

Offline blatz

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2637
  • Paul Blatz - Jupiter, FL
    • View Profile
Re: Foam pattern in pint
« Reply #18 on: April 23, 2014, 01:41:35 PM »
IME, if you keep searching for an off flavor you'll find something.  Whether it is there or not.


that is so true...
The happiest people don’t necessarily have the best of everything; they just make the best of everything they have.

BJCP National: F0281

Online HoosierBrew

  • Official Poobah of No Life.
  • *
  • Posts: 6806
  • Indianapolis,IN
    • View Profile
Re: Foam pattern in pint
« Reply #19 on: April 23, 2014, 02:18:12 PM »
+1 on looking for faults that aren't there. Usually whatever perceived fault has me irritated isn't there in a day or two when I come back to it.
Jon H.

Offline euge

  • I must live here
  • **********
  • Posts: 7658
  • Estilo Casero
    • View Profile
Re: Foam pattern in pint
« Reply #20 on: April 23, 2014, 06:40:47 PM »
I'm more worried about glaring faults. >:( And those still crop up from time to time... ;)


RDWHAHB
The first principle is that you must not fool yourself, and you are the easiest person to fool. -Richard P. Feynman

Offline bengelbrau

  • Assistant Brewer
  • ***
  • Posts: 115
    • View Profile
Re: Foam pattern in pint
« Reply #21 on: April 24, 2014, 09:27:08 AM »
I think that if you look closely you would be able to use the patterns in the  foam to foretell the future.

Offline ynotbrusum

  • Senior Brewmaster
  • ******
  • Posts: 1777
  • Da mihi sis cerevisiam.
    • View Profile
Re: Foam pattern in pint
« Reply #22 on: April 24, 2014, 11:03:00 AM »
I think it has to do with foam formation and physics stuff that is beyond me.  I have a Perlick forward sealing tap and I can put extra foam in a beer by pushing back on the tap...that results in the "island clumping foam" for me.  I never have had anyone refuse to drink it because of that foam pattern!  That is the ultimate question.  I am quite sure that it isn't a problem, though appearance in a comp might suffer in that instance, if you have a judge that expects the head to last longer...otherwise I say it's pretty normal.
Hodge Garage Brewing: "Brew with a glad heart!"

Online Steve in TX

  • Official Poobah of No Life.
  • *
  • Posts: 3307
    • View Profile
Re: Foam pattern in pint
« Reply #23 on: April 24, 2014, 11:25:37 AM »

I think that if you look closely you would be able to use the patterns in the  foam to foretell the future.

Lacing can be used to tell the future. Everybody knows that.

Offline beersk

  • Brewmaster General
  • *******
  • Posts: 2316
  • In the night!
    • View Profile
Re: Foam pattern in pint
« Reply #24 on: April 24, 2014, 02:41:48 PM »
I think it has to do with foam formation and physics stuff that is beyond me.  I have a Perlick forward sealing tap and I can put extra foam in a beer by pushing back on the tap...that results in the "island clumping foam" for me.  I never have had anyone refuse to drink it because of that foam pattern!  That is the ultimate question.  I am quite sure that it isn't a problem, though appearance in a comp might suffer in that instance, if you have a judge that expects the head to last longer...otherwise I say it's pretty normal.
That's a good point. It doesn't happen when I clear the lines first before pouring a full pint, which results in less foam and no island patches of foam. I just wonder what would be causing it because I never see it when I get a heady pour at a bar or from a bottle.
Go big AND go home.

Jesse

Online HoosierBrew

  • Official Poobah of No Life.
  • *
  • Posts: 6806
  • Indianapolis,IN
    • View Profile
Re: Foam pattern in pint
« Reply #25 on: April 24, 2014, 02:46:10 PM »
I think it has to do with foam formation and physics stuff that is beyond me.  I have a Perlick forward sealing tap and I can put extra foam in a beer by pushing back on the tap...that results in the "island clumping foam" for me.  I never have had anyone refuse to drink it because of that foam pattern!  That is the ultimate question.  I am quite sure that it isn't a problem, though appearance in a comp might suffer in that instance, if you have a judge that expects the head to last longer...otherwise I say it's pretty normal.
That's a good point. It doesn't happen when I clear the lines first before pouring a full pint, which results in less foam and no island patches of foam. I just wonder what would be causing it because I never see it when I get a heady pour at a bar or from a bottle.

That's a good point - I wonder if it's a filtering thing ? Most of us don't (and wouldn't) filter, but a decent amount of the stuff you get in a bar has been filtered, at least coarsely. Maybe the coarse filtering removes some of the proteins that could cause that. Who knows.
Jon H.

Online Joe Sr.

  • Official Poobah of No Life.
  • *
  • Posts: 3099
  • Chicago - NORTH SIDE
    • View Profile
Re: Foam pattern in pint
« Reply #26 on: April 24, 2014, 02:54:40 PM »
That's a good point. It doesn't happen when I clear the lines first before pouring a full pint, which results in less foam and no island patches of foam. I just wonder what would be causing it because I never see it when I get a heady pour at a bar or from a bottle.

I'm pretty sure I've gotten this with Guinness Extra Stout.  I'm willing to take one for the team and test it this evening.  Not sure I have any in the fridge though.

As far as reading the future, when I read the lacing I usually see... another beer in my future.
It's all in the reflexes. - Jack Burton

Offline beersk

  • Brewmaster General
  • *******
  • Posts: 2316
  • In the night!
    • View Profile
Re: Foam pattern in pint
« Reply #27 on: April 26, 2014, 12:09:48 PM »
Joe sr. Did you check it out? The weird thing with my current helles is that the pattern goes away after maybe half the beer...I just don't get it.
Go big AND go home.

Jesse

Online Joe Sr.

  • Official Poobah of No Life.
  • *
  • Posts: 3099
  • Chicago - NORTH SIDE
    • View Profile
Re: Foam pattern in pint
« Reply #28 on: April 26, 2014, 02:40:53 PM »
I had an Extra Stout and it did seem to do the same thing. I don't think the "clumps" were as solid as they are sometimes with homebrew, but the head did fall into smaller clumps.

I should have taken a picture, but I was in the midst of grilling burgers and keeping the kids away from the grill.
It's all in the reflexes. - Jack Burton