I ask because i am frustrated because i attempted this recipe this AM with shooting for a 5.6PH and ended up with 5.0 at that so i dumped it and re did the water and cont to have a lower PH than i desire. I have never had this issue before my water must have changed because i have quit a bit of bicarb.
Finished Profile ppm
Ca 100
Mg 20
Na 24
SO4 51
Cl 65
HCO3 308
Hardness 332
Alkalinity 254
RA 171
SO4/Cl 0.78
SRM: 20.2 SRM SRM RANGE: 18.0-35.0 SRM
IBU: 44.9 IBUs Tinseth IBU RANGE: 20.0-40.0 IBUs
OG: 1.058 SG OG RANGE: 1.045-1.060 SG
FG: 1.014 SG FG RANGE: 1.010-1.016 SG
BU:GU: 0.772 Calories: 151.6 kcal/12oz Est ABV: 5.8 %
EE%: 73.00 % Batch: 3.25 gal Boil: 4.90 gal BT: 60 Mins
---WATER CHEMISTRY ADDITIONS----------------
Total Grain Weight: 7 lbs 3.7 oz Total Hops: 2.14 oz oz.
---MASH/STEEP PROCESS------MASH PH:5.50 ------
>>>>>>>>>>-ADD WATER CHEMICALS BEFORE GRAINS!!<<<<<<<
Amt Name Type # %/IBU
4 lbs 9.8 oz Pale Malt - 2 Row (Cargill) (2.0 SRM) Grain 1 63.8 %
1 lbs 2.5 oz Aromatic Malt (26.0 SRM) Grain 2 16.0 %
7.0 oz Crystal, Medium (Simpsons) (55.0 SRM) Grain 3 6.1 %
7.0 oz Oats, Golden Naked (Simpsons) (10.0 SRM) Grain 4 6.1 %
7.0 oz Special B Malt (115.0 SRM) Grain 5 6.1 %
2.3 oz Chocolate (Briess) (342.0 SRM) Grain 6 2.0 %
Name Description Step Temperat Step Time
Mash In Add 3.16 gal of water at 168.1 F 153.0 F 60 min
---SPARGE PROCESS---
>>>>>>>>>>-RECYCLE FIRST RUNNINGS & VERIFY GRAIN/MLT TEMPS: 65.0 F/68.0 F
>>>>>>>>>>-ADD BOIL CHEMICALS BEFORE FWH
Fly sparge with 2.60 gal water at 168.0 F
Amt Name Type # %/IBU
0.29 oz Willamette [6.50 %] - First Wort 60.0 mi Hop 7 11.0 IBUs
---BOIL PROCESS-----------------------------
Est Pre_Boil Gravity: 1.045 SG Est OG: 1.058 SG
Amt Name Type # %/IBU
0.30 oz Columbus (Tomahawk) [15.20 %] - Boil 60. Hop 8 24.2 IBUs
Amt Name Type # %/IBU
1.55 oz Willamette [6.50 %] - Steep/Whirlpool 1 Hop 9 9.7 IBUs