Author Topic: Grain Mill  (Read 7589 times)

Offline 69franx

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3210
  • Bloatarian Brewing League
Re: Grain Mill
« Reply #45 on: November 28, 2014, 07:13:39 pm »
Thanks for all the input folks. I did pull the trigger this morning on the cereal killer from Adventures in Homebrewing for $89.99 delivered. Sounds like KlickitatJim has had good luck with it. Hope it shows up in time for next weekend's brew. If it doesn't work out I will go with a stripped down JSP Maltmill. Thanks again. Hopefully this mill can deal with my less than 300#/year


Sent from Franx Brew Works using Tapatalk
Frank L.
Fermenting: Nothing (ugh!)
Conditioning: Nothing (UGH!)
In keg: Nothing (Double UGH!)
In the works:  House IPA, Dark Mild, Ballantine Ale clone(still trying to work this one into the schedule)

Offline klickitat jim

  • I must live here
  • **********
  • Posts: 8604
Re: Grain Mill
« Reply #46 on: November 28, 2014, 08:15:16 pm »
I think it will. Find the setting that works best for you and leave it there. That's my advice. I blow mine clean with compressor after each use and I use the box it came in as a cover. Good luck, let us know how it goes.

Offline 69franx

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3210
  • Bloatarian Brewing League
Re: Grain Mill
« Reply #47 on: November 28, 2014, 08:24:35 pm »
 Thanks Jim, I will


Sent from Franx Brew Works using Tapatalk
Frank L.
Fermenting: Nothing (ugh!)
Conditioning: Nothing (UGH!)
In keg: Nothing (Double UGH!)
In the works:  House IPA, Dark Mild, Ballantine Ale clone(still trying to work this one into the schedule)

Offline BrewBama

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 5330
Re: Grain Mill
« Reply #48 on: November 29, 2014, 10:52:14 pm »
Just ordered a Schmidling MaltMill

Online denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 25710
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Grain Mill
« Reply #49 on: November 30, 2014, 09:22:25 am »
I see my harder rollers are getting worn out.
I put about 60,000 lb of grain thru them in 4 years. Still works well but I am ready for replacement.

Yeah, but that's a consideration that homebrewers don't need to think about!
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell