Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Partial vs. Full Boil  (Read 2694 times)

Offline flbrewer

  • Brewmaster General
  • *******
  • Posts: 2161
Partial vs. Full Boil
« on: October 28, 2014, 07:12:25 am »
Getting an expensive kit in the mail today (linked below) and the instructions are for a partial boil.

I have a large enough kettle and burner to quickly heat 5 gallons, but no immersian chiller (ice bath takes a while).

1)Should I follow the instructions or boil 5+ gallons? If I do a full boil, what volume should I use?

I'm asking because if it wouldn't impact the flavor, I'd rather partial boil (faster cool, lighter weight kettle).

http://www.northernbrewer.com/documentation/beerkits/OfftheTopper.pdf

Offline morticaixavier

  • I must live here
  • **********
  • Posts: 7781
  • Underhill VT
    • The Best Artist in the WORLD!!!!!
Re: Partial vs. Full Boil
« Reply #1 on: October 28, 2014, 07:43:05 am »
I'd go with the kit instructions. I just don't think you are going to buy yourself anything with the full boil here. The ONLY thing I can think of is that the hops might not be quite as bright after dilution but I have no actual experience to corroborate that.
"Creativity is the residue of wasted time"
-A Einstein

"errors are [...] the portals of discovery"
- J Joyce

Offline reverseapachemaster

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3777
    • Brain Sparging on Brewing
Re: Partial vs. Full Boil
« Reply #2 on: October 28, 2014, 08:15:34 am »
If the instructions call for a partial boil then I would just do the partial boil. Doing a full boil on the hops will give you a lot more bitterness and not a whole lot else. If you want to brew a very bitter version of the recipe then do a full boil. If you want it to taste like what the kit intended then just do the partial boil.
Heck yeah I blog about homebrewing: Brain Sparging on Brewing

Offline LittleBigDreams14

  • 1st Kit
  • *
  • Posts: 24
Re: Partial vs. Full Boil
« Reply #3 on: November 15, 2014, 07:24:34 am »
What's gon on fellas. So I am doing another batch today and super stoked about it as always. I have been talking with a few different people about the correct steeping method. My question is....is it better to bring water to a boil and then steep or is it bester that I steep while the water is heating up? And with that how long should I steep for? The batch I am doing is a spin on a pumpkin beer. Since the season is over I am still craving that deliciousness. Thanks guys!
Little Big Dreams Brew Co.

Offline Stevie

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 6858
Re: Partial vs. Full Boil
« Reply #4 on: November 15, 2014, 07:33:36 am »
Have not steeped grains in years, but when I did I steeped at 150 for 30 minutes. Beers with lots of roast might benefit from a steep that starts at a cooler temp.

Offline LittleBigDreams14

  • 1st Kit
  • *
  • Posts: 24
Re: Partial vs. Full Boil
« Reply #5 on: November 15, 2014, 08:21:43 am »
Thanks Steve. So it be best to steep my grains and pumpkin at 150 for 30 mins. Then sparge  then bring to boil got ya. Do you happen to know anything about using pumpkin puree? Like when I steep it is that enough to cook it or should I heat it up prior to steep it since it's not really cooked?
Little Big Dreams Brew Co.

Offline Stevie

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 6858
Re: Partial vs. Full Boil
« Reply #6 on: November 15, 2014, 10:14:12 am »

Thanks Steve. So it be best to steep my grains and pumpkin at 150 for 30 mins. Then sparge  then bring to boil got ya. Do you happen to know anything about using pumpkin puree? Like when I steep it is that enough to cook it or should I heat it up prior to steep it since it's not really cooked?
Never used it, sorry. Do you have a recipe your working if of? Check around and see what others have done.

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Partial vs. Full Boil
« Reply #7 on: November 15, 2014, 10:38:02 am »
Do you happen to know anything about using pumpkin puree? Like when I steep it is that enough to cook it or should I heat it up prior to steep it since it's not really cooked?

If you aren't mashing, I'd skip the pumpkin. Most of the "pumpkin" flavor in a pumpkin beer is from the spices anyway, and you'll avoid the issues with having excess proteins and starches in the finished beer.

I've read some recipes that call for spreading the puree out in a thin layer and baking it in an attempt to caramelize the starches, but I haven't tried it myself. I'd imagine that would force out a lot of the water and make a mess though.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline flbrewer

  • Brewmaster General
  • *******
  • Posts: 2161
Re: Partial vs. Full Boil
« Reply #8 on: November 15, 2014, 10:58:13 am »
What's gon on fellas. So I am doing another batch today and super stoked about it as always. I have been talking with a few different people about the correct steeping method. My question is....is it better to bring water to a boil and then steep or is it bester that I steep while the water is heating up? And with that how long should I steep for? The batch I am doing is a spin on a pumpkin beer. Since the season is over I am still craving that deliciousness. Thanks guys!

Out of curiosity, why not start a new thread?