I pulled off a brew day finishing with 2 beers totaling 12 gallons in fermentors. I brewed a Red Ale and an Imperial Red Ale. I have a Liquor Tank, Mash Tun and Boiler on a stand with two pumps.
I pulled if off by Lautering a base for two beers totaling 17 gallons. The first Lauter was pulled into the 15 gallon Blichman Boiler. It was up to the very edge. At this point I drained the Liquor Tun of water into the Mash Tun followed by Lautering the remaining wort to the Liquor Tun. Because I did the 2nd Lautering to the Liquor Tun, I now have two Boilers for Two Beers. Next I pulled about 12 gallons of wort from the Boiler to the Liquor Tank, mixed thoroughly, then moved enough wort back from the Liquor Tank to the Boiler so that both the Liquor Tank and Boiler had 8.5 pre-boil gallons each.
Has anyone else pushed their system, and was it worth it?