Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Harvesting yeast for next brew...  (Read 1527 times)

Offline The Fat Jedi

  • 1st Kit
  • *
  • Posts: 8
Harvesting yeast for next brew...
« on: July 02, 2015, 05:37:10 am »
I've never done this before so looking for some advice.

I'm looking to harvest some yeast from my Pliny the Elder clone brew. I used a WLP001 yeast to ferment and it's been sitting on it for around 10 days. This weekend I'm looking to make a coffee oatmeal stout and was hoping to reuse the yeast. I know how to do this in principle (but any hints and tips great fully received!)

My questions are

1) The Pliny clone is obviously heavily hopped, the stout isn't. Will I get a residual taint of hops in the stout?
2) If so is there a way to minimise this?
3) is this just a bad idea?!

Thanks for the help.

D


Sent from my iPhone using Tapatalk

S. cerevisiae

  • Guest
Re: Harvesting yeast for next brew...
« Reply #1 on: July 02, 2015, 07:15:33 am »
Cropping from a bitter batch will not make your next batch bitter.    However, cropping from an above 6.0% ABV beer is not the best practice.


Offline The Fat Jedi

  • 1st Kit
  • *
  • Posts: 8
Re: Harvesting yeast for next brew...
« Reply #2 on: July 02, 2015, 09:15:54 am »
OK thanks! The OG of this beer is 1.072. I guess I should just dump it then...


Sent from my iPhone using Tapatalk

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 27090
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: Harvesting yeast for next brew...
« Reply #3 on: July 02, 2015, 09:22:41 am »
OK thanks! The OG of this beer is 1.072. I guess I should just dump it then...


Sent from my iPhone using Tapatalk

Being a yeast abuser, I often harvest and reuse the yeast from a 1.072 OG beer.  I've never seen a problem.  I don't harvest from anything much above that, though.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

S. cerevisiae

  • Guest
Re: Harvesting yeast for next brew...
« Reply #4 on: July 02, 2015, 09:36:26 am »
OK thanks! The OG of this beer is 1.072. I guess I should just dump it then...


Sent from my iPhone using Tapatalk

That's pushing it.   Some strains can handle the abuse while others cannot.  I repitched yeast cropped from a 7.3% ABV Rye IPA a couple of months back.  I pitched this batch with yeast taken from a 5% ABV batch.  The 5% and 7.3 ABV batches fully attenuated with no odd flavors. The fermentation that immediately followed the 7.3% beer failed to fully attenuate.  I have since repitched the culture with full attenuation, but I had to double-drop the culture twice.  I am still not happy with its performance.  I have serially repitched cultures in the past that were taken from sub-6.0 ABV beers for up to 12 batches with no major degradation in performance.  Six percent ABV appears to be a generally agreed upon alcohol level when taking crops.  It's part of the reason why British brewers can repitch forever.
« Last Edit: July 03, 2015, 06:06:57 pm by S. cerevisiae »

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Harvesting yeast for next brew...
« Reply #5 on: July 02, 2015, 11:36:22 am »
Chico is pretty robust and I doubt you'll have an issue, but I personally would pull 20 mL or so of slurry and use that to propagate a new starter.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline The Fat Jedi

  • 1st Kit
  • *
  • Posts: 8
Re: Harvesting yeast for next brew...
« Reply #6 on: July 03, 2015, 06:46:05 am »
Thanks for the advice everyone! Very useful!

Cheers!


Sent from my iPhone using Tapatalk

Offline brulosopher

  • Brewmaster
  • *****
  • Posts: 505
  • They who drink beer will think beer
    • Brülosophy
Re: Harvesting yeast for next brew...
« Reply #7 on: July 03, 2015, 07:18:42 am »
I'm with Sean, I'd pull 20-40 mL then throw it in 500 mL wort 4-6 hours pre-pitch to ensure 100% vitality. Water down some of your real wort to ~1.040 SG, boil for 5 min, chill, add yeast, put on stir plate or shake intermittently.