Author Topic: race-track keg lids  (Read 4542 times)

Offline jbutterw

  • 1st Kit
  • *
  • Posts: 7
race-track keg lids
« on: July 21, 2010, 06:31:18 PM »
So, what is the story with race-track lids? Some internet searching indicates that they are rare, and can be a pain to work with.

I managed to acquire a few recently, and I am trying to decide if they are worth continuing to use.

So, some questions:

1) Why do people consider them to be a pain? They seem simple enough to me.

2) I imagine they use the same post o-rings as standard lid kegs, but what about the lid? Wishful thinking has me thinking that the circumference of the race-track lids is the same as the round lids, and therefore the lid o-ring will be the same. Anyone know anything about this? (I don't have any round-lid kegs to personally try this out.)


Online denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 23859
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: race-track keg lids
« Reply #1 on: July 21, 2010, 06:45:09 PM »
I have both race track and round keg lids and interchange the o rings freely.
Life begins at 60.....1.060, that is!

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline beerocd

  • Senior Brewmaster
  • ******
  • Posts: 1429
Re: race-track keg lids
« Reply #2 on: July 21, 2010, 06:56:02 PM »
OK, help me out. Looked at pictures online of oval and racetrack - I unfortunately see no difference...
The moral majority, is neither.

Offline tom

  • Senior Brewmaster
  • ******
  • Posts: 1110
  • Denver, CO
Re: race-track keg lids
« Reply #3 on: July 21, 2010, 07:07:23 PM »
Racetrack lids have straight sides and round ends. Oval lids are, well oval.  ;)
Brew on

Offline bluesman

  • I must live here
  • **********
  • Posts: 8825
  • Delaware
Re: race-track keg lids
« Reply #4 on: July 21, 2010, 08:55:45 PM »
This is a racetrack lid.

...and this is an oval lid.

Ron Price

Offline narcout

  • Brewmaster General
  • *******
  • Posts: 2028
  • Los Angeles, CA
Re: race-track keg lids
« Reply #5 on: July 21, 2010, 09:03:02 PM »
My racetrack lid looks quite a bit different than the one posted above. I'll try to post a picture when I get home if I have time.

Also, mine came with an o-ring that is flatter and thinner than the standard lid o-ring, but the standard o-ring works just fine.

As far as some people considering them a pain, I think that just has to do with the difficulty of finding a replacement should you have the need.
« Last Edit: July 21, 2010, 09:04:50 PM by narcout »
Sometimes you just can't get enough - JAMC