Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Sierra Nevada Pale Ale Clone  (Read 26153 times)

Offline madscientist

  • Brewer
  • ****
  • Posts: 321
Sierra Nevada Pale Ale Clone
« on: July 14, 2010, 10:39:10 am »
I tried some searching on the forum and didn't come up with much.  I'm looking for an extract recipe for a SNPA clone.  I found this via google: http://www.cornells.com/content.cfm?s=5&p=29

But according to wikipedia, SNPA has caramel malt and different hops.  Which one is right and what extracts would I use?
Homebrewed since 2010

Offline hopfenundmalz

  • Global Moderator
  • I must live here
  • *****
  • Posts: 10686
  • Milford, MI
Re: Sierra Nevada Pale Ale Clone
« Reply #1 on: July 14, 2010, 10:59:00 am »
Sierra Nevada uses 60L crystal malt, same as caramel.

The hops have changed over time.  You might leave out the carapils in this one, and up the crystal.

http://beerdujour.com/Recipes/ChrisFrey/Nearly_Nirvana_-_the_Original_Big_Brew_2000_Recipe.html

vs today where they use some Magnum for bittering along with the perle.

http://www.sierranevada.com/beers/paleale.html
Jeff Rankert
AHA Lifetime Member
BJCP National
Ann Arbor Brewers Guild
Home-brewing, not just a hobby, it is a lifestyle!

Offline madscientist

  • Brewer
  • ****
  • Posts: 321
Re: Sierra Nevada Pale Ale Clone
« Reply #2 on: July 14, 2010, 02:14:57 pm »
OK so I decided on a recipe.  Basically from the link I posted with the exception of the hops.  Should I adjust any amounts of hops?

(I'm assuming this makes 5 gal)

6.6 lbs Light Malt Extract
1.0 lb crystal malt 60L
1.0 oz Perle Hops @60min
1.0 oz Magnum Hops @10min
1.0 oz Cascade Hops @ 1min
Wyeast American Ale 1056
3/4 cup priming sugar

Says the secondary fermenter is optional with an optional dry hopping.  What's the advantage of this?  Any other thoughts?

I'll steep the grains at about 170 for 30min, then bring to a boil and add extracts, then hops @ appropriate times.

Homebrewed since 2010

Offline Hokerer

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2654
  • Manassas, VA
Re: Sierra Nevada Pale Ale Clone
« Reply #3 on: July 14, 2010, 03:35:20 pm »
OK so I decided on a recipe.  Basically from the link I posted with the exception of the hops.  Should I adjust any amounts of hops?

(I'm assuming this makes 5 gal)

6.6 lbs Light Malt Extract
1.0 lb crystal malt 60L
1.0 oz Perle Hops @60min
1.0 oz Magnum Hops @10min
1.0 oz Cascade Hops @ 1min
Wyeast American Ale 1056
3/4 cup priming sugar

Says the secondary fermenter is optional with an optional dry hopping.  What's the advantage of this?  Any other thoughts?

I'll steep the grains at about 170 for 30min, then bring to a boil and add extracts, then hops @ appropriate times.



Looks Ok except for where you've got the Magnum.  Like Fred said, they use Magnum along with the Perle for bittering - that's generally your 60 minute addition.  Take the IBU's the Perle alone gives you in the original recipe and then reduce the amount of Perle and add Magnum (both at 60 minutes) adjusting the amounts of each until you get the same IBU's as before.

Oh, and put the Cascades back in there at 10 minutes.
Joe

Offline pinnah

  • Senior Brewmaster
  • ******
  • Posts: 1323
  • Wesloper, CO
Re: Sierra Nevada Pale Ale Clone
« Reply #4 on: July 14, 2010, 04:52:04 pm »
There is a dead ringer found right HERE in this famous thread.
The extract version is within the first few pages.

FWIW, I would always dryhop this beer with some cascade for increased aroma; the privilege of the homebrewer.  Cheers.

Offline richardt

  • Senior Brewmaster
  • ******
  • Posts: 1227
Re: Sierra Nevada Pale Ale Clone
« Reply #5 on: July 14, 2010, 05:22:54 pm »
I like SNPA--though I do notice that it tends to fluctuate in quality sometime. 

My hop suggestions for your recipe:

Magnum at 60.  Clean bittering hop.
Perle at 60 and 30.  Dual-purpose.  Balanced bittering.  Floral, spicy, hoppy.  Moderately intense.
Cascade at 30, 10 and 0.  Dual-purpose. Flowery, citrusy, grapefruit aroma 
 
The amounts will depend on your target IBU's and the AA's of the hops you have.

Offline Pawtucket Patriot

  • Senior Brewmaster
  • ******
  • Posts: 1367
  • Rebelling against cheap swill since 2005
    • Bauhaus Brew Labs
Re: Sierra Nevada Pale Ale Clone
« Reply #6 on: July 15, 2010, 06:06:18 am »
There is a dead ringer found right HERE in this famous thread.
The extract version is within the first few pages.

FWIW, I would always dryhop this beer with some cascade for increased aroma; the privilege of the homebrewer.  Cheers.

This is the recipe you'll want to brew.  I've made it several times and it is, like Pinnah said, "a dead ringer."
Matt Schwandt | Minneapolis, MN
AHA Member

Partial-Mash Pictorial
All-Grain Pictorial

Offline madscientist

  • Brewer
  • ****
  • Posts: 321
Re: Sierra Nevada Pale Ale Clone
« Reply #7 on: July 15, 2010, 06:44:41 am »
Awesome!  I think I might try out a smaller batch for this one to start.  I like this recipe.  I appreciate all the help! 
Homebrewed since 2010

Offline jamesbishop9

  • 1st Kit
  • *
  • Posts: 12
Re: Sierra Nevada Pale Ale Clone
« Reply #8 on: March 27, 2018, 01:38:59 pm »
There is a dead ringer found right HERE in this famous thread.
The extract version is within the first few pages.

FWIW, I would always dryhop this beer with some cascade for increased aroma; the privilege of the homebrewer.  Cheers.



Does this recipe still exist??

Offline jamesbishop9

  • 1st Kit
  • *
  • Posts: 12
Re: Sierra Nevada Pale Ale Clone
« Reply #9 on: March 27, 2018, 01:45:27 pm »
There is a dead ringer found right HERE in this famous thread.
The extract version is within the first few pages.

FWIW, I would always dryhop this beer with some cascade for increased aroma; the privilege of the homebrewer.  Cheers.

This is the recipe you'll want to brew.  I've made it several times and it is, like Pinnah said, "a dead ringer."




Striving to find the best version, any copies of this recipe in your collection?

Offline riceral

  • Brewer
  • ****
  • Posts: 436
Re: Sierra Nevada Pale Ale Clone
« Reply #10 on: March 27, 2018, 01:54:27 pm »
There is a dead ringer found right HERE in this famous thread.
The extract version is within the first few pages.

FWIW, I would always dryhop this beer with some cascade for increased aroma; the privilege of the homebrewer.  Cheers.

This is the recipe you'll want to brew.  I've made it several times and it is, like Pinnah said, "a dead ringer."

Striving to find the best version, any copies of this recipe in your collection?

I don't think you can get any better "clone" than this:
https://sierranevada.com/beer/year-round/pale-ale

Ralph R.

Offline jamesbishop9

  • 1st Kit
  • *
  • Posts: 12
Re: Sierra Nevada Pale Ale Clone
« Reply #11 on: March 27, 2018, 02:31:01 pm »
There is a dead ringer found right HERE in this famous thread.
The extract version is within the first few pages.

FWIW, I would always dryhop this beer with some cascade for increased aroma; the privilege of the homebrewer.  Cheers.

This is the recipe you'll want to brew.  I've made it several times and it is, like Pinnah said, "a dead ringer."

Striving to find the best version, any copies of this recipe in your collection?

I don't think you can get any better "clone" than this:
https://sierranevada.com/beer/year-round/pale-ale


Their website is only listing Cascade hops in the recipe, which may be an ancient version of theirs. They have been using Magnum and Perle as the bittering hops for their current product. I want the recipe which mimicking this more current/well known version.

Offline Stevie

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 6858
Re: Sierra Nevada Pale Ale Clone
« Reply #12 on: March 27, 2018, 02:37:25 pm »
They likely simplified it for the bittering addition to make it easy and less to buy. You will not notice a difference.

Offline Robert

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4214
Re: Sierra Nevada Pale Ale Clone
« Reply #13 on: March 27, 2018, 03:08:29 pm »
Often the descriptions on brewers websites list  "featured" ingredients, not all of them; I wouldn't put too much stock in their only listing Cascade.

Also remeber:  even if you used their exact recipe, brewed on your system it would be unlikely to match what's brewed on theirs.  You will have to start somewhere and tinker with your recipe until you  get a reasonable match.  Even be open to switching yeast!
« Last Edit: March 27, 2018, 03:24:21 pm by Robert »
Rob Stein
Akron, Ohio

I'd rather have questions I can't answer than answers I can't question.

Offline jamesbishop9

  • 1st Kit
  • *
  • Posts: 12
Re: Sierra Nevada Pale Ale Clone
« Reply #14 on: March 27, 2018, 03:17:58 pm »
Often the descriptions on brewers websites list  "featured" ingredients, not all of them; I wouldn't put too much stock in their only listing Cascade.



I was just on their website before I went to Europe a couple of weeks ago and they had listed Magnum and Perle in the hop additions. Wish I would have screen shotted. However, still, they only listed the grain bill by percentage.