[lizaambler]

Hey all - I am getting more and more confused looking on the net for information on a keg setup. I already have a kegerator with a drip tray, one ball lock keg, a draft tower without tubing, and a CO2 tank. I figure I need a CO2 regulator, a liquid ball lock disconnect, a gas ball lock disconnect, and beverage tubing. I don't know what I need to attach to the beverage tubing to connect to the CO2 regulator OR to the draft tower. Any advice would be appreciated. Thanks!

[HoosierBrew]

The gas line is what goes from the CO2 regulator to the gas in post of the keg. The liquid out post of the keg (via a QD) connects the beer line on one end, and the other end of the beer line goes up through the tower and connects to the faucet with a clamp.

[Stevie]

It's all done with hose barbs and clamps. Sometimes a flare swivel fitting plus hose barb is needed.

[lizaambler]

Cool. I think I've almost got everything, although I'm going to invest in a double gauge regulator instead of the single one that came with the kegerator.

[BrewArk]

Check the Draught Beer Quality Manual:

https://www.brewersassociation.org/educational-publications/draught-quality/

to determine the length of tubing you'll need (amongst other things).

[lizaambler]

Wow! Exactly what I needed. Thanks

[Stevie]

I would recommend starting with double the amount of beer line as recommended in the manual and adjust as needed.