Membership questions? Log in issues? Email info@brewersassociation.org

Author Topic: Going pro and converting dairy equipment  (Read 4032 times)

Offline Bill

  • 1st Kit
  • *
  • Posts: 4
Going pro and converting dairy equipment
« on: March 21, 2017, 09:10:26 am »
Hello brewing brothers!  I am going Pro with a winery and we have some dairy equipment we need to convert.  Are there any contacts or resources that I can use to help me do this.   I'm thinking of converting three 170 Gal upright dairy tanks into 2 mash tuns and 1 boil kettle.  Any ideas?


Offline Frankenbrew

  • Brewmaster
  • *****
  • Posts: 709
Re: Going pro and converting dairy equipment
« Reply #1 on: March 21, 2017, 12:01:27 pm »
Dimensions?

I'm not an expert by any means, but I know that the geometry of the vessels are important to their function.
Frank C.

And thereof comes the proverb: 'Blessing of your
heart, you brew good ale.'

Offline hopfenundmalz

  • Global Moderator
  • I must live here
  • *****
  • Posts: 10685
  • Milford, MI
Re: Going pro and converting dairy equipment
« Reply #2 on: March 21, 2017, 12:48:27 pm »
Winery?

When Sierra Nevada started, Ken Grossman modified some dairy equipment for the brewhouse. It can be done.
Jeff Rankert
AHA Lifetime Member
BJCP National
Ann Arbor Brewers Guild
Home-brewing, not just a hobby, it is a lifestyle!

Offline majorvices

  • Global Moderator
  • I must live here
  • *****
  • Posts: 11332
  • Polka. If its too loud you're too young.
Re: Going pro and converting dairy equipment
« Reply #3 on: March 21, 2017, 01:37:26 pm »
I started with dairy equipment. We had everything welded in for us. Not sure how much help I can give you but I've definitely been there. The used dairy tank we had for a MT had a paddle installed when we got it and just had 2 screens designed for the false bottom.

The BK we used a burner attached through the side and had an an element that ran across the bottom 1/3 of the tank.

We did not used dairy equipment for fermentors, we used plastic conicals heat wrapped in a cold room to control fermentation temps.

I can honestly say that dairy tanks are a good way to get started when you are on a budget but no doubt it is a short term solution. Once you move onto professional equipment your life will be much, much better. and so will your product.

Offline a10t2

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 4696
  • Ask me why I don't like Chico!
    • SeanTerrill.com
Re: Going pro and converting dairy equipment
« Reply #4 on: March 21, 2017, 05:00:50 pm »
Here in Colorado I'd recommend Dairy Engineering. http://dairyengineering.com

I can honestly say that dairy tanks are a good way to get started when you are on a budget but no doubt it is a short term solution. Once you move onto professional equipment your life will be much, much better. and so will your product.

Can't second that enough.
Sent from my Microsoft Bob

Beer is like porn. You can buy it, but it's more fun to make your own.
Refractometer Calculator | Batch Sparging Calculator | Two Mile Brewing Co.

Offline wmbolling

  • Global Moderator
  • Assistant Brewer
  • *****
  • Posts: 126
Re: Going pro and converting dairy equipment
« Reply #5 on: March 22, 2017, 10:01:33 am »
Tom Hennessey of Colorado Boy Brewing Co. presented a seminar at last year's Homebrew Con in Baltimore on pieced-together brewing systems for homebrewers interested in going pro using equipment like that. I would definitely check it out:

https://www.homebrewersassociation.org/how-to-brew/resources/conference-seminars/

"Frankenbrew: Are Pieced Together Systems Still Viable"
Matt Bolling