Author Topic: Blichmann Pump  (Read 1464 times)

Offline mabrungard

  • Brewmaster General
  • *******
  • Posts: 2148
  • Water matters!
    • View Profile
    • Bru'n Water
Blichmann Pump
« on: May 13, 2017, 03:07:17 PM »
I just became aware of a new pump that Blichmann is coming out with. I saw a pre-production version at my LHBS and heard their staff's reviews after using it in their in-house system. It reportedly was developed in conjunction with March pumps and it does look and sound impressive.

From the pump specs, it is more powerful than the typical March or Chugger since it reportedly delivers up to 7 gpm and max's out at 21 ft of head. I seem to recall that my March 815 can deliver something like 5 gpm and it max's out at about 12 ft of head. So this new pump can move some wort. Interestingly, the SST head is held onto the motor with a tri-clover clamp and it includes one of Blichmann's needle valves for flow control. I see that it also includes a spring-loaded bleed port to allow you to quickly expel air from the pump volute.

The guys at my LHBS said the pump is almost scary quiet, so that is nice. But, I have to admit that the typical March or Chugger isn't that loud either.

I'm not in the market for a pump, but if I was, this would definitely be at the top of the list.

http://www.blichmannengineering.com/products/riptide-brewing-pump
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook
https://www.facebook.com/Brun-Water-464551136933908/?ref=bookmarks

Online Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6635
    • View Profile
Blichmann Pump
« Reply #1 on: May 13, 2017, 06:26:40 PM »
And yours for $499 (kidding, but com'on it's blingmann it's the price I would have expected.) $199 isn't bad

Quick disassembly and integral valve is pretty nice. Don't care about the bleeder as I don't use one.
« Last Edit: May 13, 2017, 06:28:31 PM by Stevie »

Offline Phil_M

  • Senior Brewmaster
  • ******
  • Posts: 1502
  • Southern Maryland
    • View Profile
Re: Blichmann Pump
« Reply #2 on: May 14, 2017, 09:45:38 AM »
Well I'm sold. You can actually take the impeller apart to clean it? That was my biggest issue with my old (now sold) Chugger pump.

I know what's next on my brewing wish list...
Don't buy stale beer.

Offline Philbrew

  • Brewmaster
  • *****
  • Posts: 834
    • View Profile
Re: Blichmann Pump
« Reply #3 on: May 14, 2017, 01:37:01 PM »
They put some thought into that puppy.  Really good performance, integral valve, quick no-tools disassembly, power switch, 10 ft. cord, base doubles as cord storage.  The price ain't bad considering the features.

Something more that I just noticed that makes it a really good brew pump.  The motor is totally enclosed, fan cooled.  You can hose it down!
« Last Edit: May 14, 2017, 01:55:03 PM by Philbrew »
Many of us would be on a strict liquid diet if it weren't for pretzels.

Offline theDarkSide

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2958
  • Derry, NH
    • View Profile
Re: Blichmann Pump
« Reply #4 on: May 15, 2017, 05:41:59 AM »
I like that I can upgrade my current pump.  Will definitely check this out at NHC in June.
BNArmy CLUB Member
Seacoast Homebrew Club - Portsmouth, NH
AHA Member
Stephen Mayo
------------------------------------------------

Offline The Beerery

  • Senior Brewmaster
  • ******
  • Posts: 1358
  • More you know, the more you know you don't know!
    • View Profile
Re: Blichmann Pump
« Reply #5 on: May 18, 2017, 12:30:17 PM »
I don't understand with all that bling they didn't make it center inlet and have a SS impeller. :o
Herr, wirf Hirn vom Himmel!
(Oder Steine, Hauptsache er trifft.)
Check us out at www.lowoxygenbrewing.com (Now with forums)
"Consistently successful brewers are invariably the ones who operate low oxygen systems." -George Fix Circa 1999
Taplist and Fermentation Cellar
"Progress is impossible without change, and those who cannot change their minds cannot change"

Online Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6635
    • View Profile
Re: Blichmann Pump
« Reply #6 on: May 18, 2017, 12:38:32 PM »
I agree on the center input. Much more efficient. A stainless impeller would be very heavy and would lead to shortened life of the head and or motor.

Offline AleForce

  • Cellarman
  • **
  • Posts: 86
    • View Profile
    • AleForce1
Re: Blichmann Pump
« Reply #7 on: May 24, 2017, 07:59:14 AM »
There is a nice YouTube video comparing the March, Chugger, and Riptide.
After watching that video I decided to purchase one from Great Fermentations to replace my SS Chugger pump. Wish they came out with a pump head with TC outputs also.

https://www.youtube.com/watch?v=QFvHAs0LXrA
Off We Go Into The Wild Brew Yonder!

Offline toby

  • Brewmaster
  • *****
  • Posts: 996
  • Galvez, LA
    • View Profile
    • Beer Judge Chronicles
Re: Blichmann Pump
« Reply #8 on: May 24, 2017, 08:29:51 AM »
Wish they came out with a pump head with TC outputs also.

It's not that difficult to add a FPT to TC adapter.

Online Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6635
    • View Profile
Re: Blichmann Pump
« Reply #9 on: May 24, 2017, 10:24:53 AM »
 NPT -> TC is sacrilege to the TC faithful.

Offline Phil_M

  • Senior Brewmaster
  • ******
  • Posts: 1502
  • Southern Maryland
    • View Profile
Re: Blichmann Pump
« Reply #10 on: May 24, 2017, 10:41:16 AM »
It's not that it's sacrilegious, it just defeats the point of spending the money for a sanitary fitting.

There are other options that are just as convenient connection-wise as a TC, for a fraction of the cost. The reason behind the cost is the ability to really sanitize everything.

DISCLAIMER: This applies to using TC tubing connections. I don't feel this way about using it on element ports, or the way they're utilized on the pump in question. Some components pretty much only come in TC as well, so you're kinda stuck with the cost at that point.
Don't buy stale beer.

Offline AleForce

  • Cellarman
  • **
  • Posts: 86
    • View Profile
    • AleForce1
Re: Blichmann Pump
« Reply #11 on: May 24, 2017, 11:03:29 AM »
Wish they came out with a pump head with TC outputs also.

It's not that difficult to add a FPT to TC adapter.
Yeah I know. I have TC fittings on my chugger pumps.
Off We Go Into The Wild Brew Yonder!

Online Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6635
    • View Profile
Re: Blichmann Pump
« Reply #12 on: May 24, 2017, 12:13:13 PM »
It's not that it's sacrilegious, it just defeats the point of spending the money for a sanitary fitting.

There are other options that are just as convenient connection-wise as a TC, for a fraction of the cost. The reason behind the cost is the ability to really sanitize everything.

DISCLAIMER: This applies to using TC tubing connections. I don't feel this way about using it on element ports, or the way they're utilized on the pump in question. Some components pretty much only come in TC as well, so you're kinda stuck with the cost at that point.
TC is pointless hotside which this pump is designed for. I agree they are superior cold side.

Offline Phil_M

  • Senior Brewmaster
  • ******
  • Posts: 1502
  • Southern Maryland
    • View Profile
Re: Blichmann Pump
« Reply #13 on: May 24, 2017, 01:43:15 PM »
The only way I foresee using one hot side in my home brewery is if I use a sight glass.
Don't buy stale beer.

Online Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6635
    • View Profile
Re: Blichmann Pump
« Reply #14 on: May 24, 2017, 02:21:49 PM »
The only way I foresee using one hot side in my home brewery is if I use a sight glass.
I've seen camlock sight glasses.