Author Topic: CO2 regulator  (Read 1668 times)

Offline greatplainsbrewer

  • Assistant Brewer
  • ***
  • Posts: 144
    • View Profile
CO2 regulator
« on: August 01, 2017, 07:47:34 PM »
I have a kegco co2 regulator purchased in Nov 2015 that i use to carbonate kegs and bottle with a beergun.  Today was pretty challenging.  I released the pressure on the keg and tried to reduce the pressure at the regulator.  I could bring it down to 10 psi but any lower resulted in no co2 pressure at the beer gun.  A slight, like less than 15 degree turn of the regulator put it back at 10 psi.  It will go higher than that but not lower.  Surely a regulator less than two years old isn't shot.  My oxy-acetylene regulators are older than I am and theyre still going strong.

Any thoughts?
Thanks

Offline Slowbrew

  • Brewmaster General
  • *******
  • Posts: 2422
  • The Slowly Losing IT Brewery in Urbandale, IA
    • View Profile
Re: CO2 regulator
« Reply #1 on: August 01, 2017, 08:16:35 PM »
Nothing is built the way it used to be anymore.  The ones on your welding rig are probably still working because they're older than you are.  They likely cost more than the CO2 one also.

You may need to disassemble and clean/lube the CO2 regulator.  I've never taken one apart but the rebuild kits don't look like they have too many parts in them.  So take my comments for what they're worth.   :)

Paul
Where the heck are we going?  And what's with this hand basket?

Offline Joe Sr.

  • Official Poobah of No Life.
  • *
  • Posts: 4360
  • Chicago - NORTH SIDE
    • View Profile
Re: CO2 regulator
« Reply #2 on: August 02, 2017, 03:38:43 PM »
Could there be a slight leak?
It's all in the reflexes. - Jack Burton

Offline greatplainsbrewer

  • Assistant Brewer
  • ***
  • Posts: 144
    • View Profile
Re: CO2 regulator
« Reply #3 on: August 02, 2017, 06:11:47 PM »
I don't think it's leaking- I use it to carb kegs.  It was hooked up for at least two weeks without me checking it before yesterday.  I would have thought a leak would have emptied that 5 pound cylinder.

Offline Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6858
    • View Profile
Re: CO2 regulator
« Reply #4 on: August 02, 2017, 09:58:21 PM »
Sometimes regulators are slow to react to adjustments.

Offline HoosierBrew

  • Global Moderator
  • I must live here
  • *****
  • Posts: 13030
  • Indianapolis,IN
    • View Profile
Re: CO2 regulator
« Reply #5 on: August 02, 2017, 10:04:30 PM »
Sometimes regulators are slow to react to adjustments.


Yeah, for sure.
Jon H.

Offline greatplainsbrewer

  • Assistant Brewer
  • ***
  • Posts: 144
    • View Profile
Re: CO2 regulator
« Reply #6 on: August 03, 2017, 01:55:55 PM »
We have a winner- thanks SlowBrew

Figured I didn't have much to lose so I disassembled the regulator.  The diaphragm had some small debris on it so I wiped it clean and reassembled it.  Seems to work now.

Thanks for the responses

Offline Slowbrew

  • Brewmaster General
  • *******
  • Posts: 2422
  • The Slowly Losing IT Brewery in Urbandale, IA
    • View Profile
Re: CO2 regulator
« Reply #7 on: August 03, 2017, 02:50:58 PM »
We have a winner- thanks SlowBrew

Figured I didn't have much to lose so I disassembled the regulator.  The diaphragm had some small debris on it so I wiped it clean and reassembled it.  Seems to work now.

Thanks for the responses

I'll have to frame this one.   ;D

Paul
Where the heck are we going?  And what's with this hand basket?