Author Topic: I think I have to have this....  (Read 4218 times)

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 24774
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell

Offline Wilbur

  • Brewmaster
  • *****
  • Posts: 794
Re: I think I have to have this....
« Reply #1 on: August 15, 2017, 07:32:48 pm »
I think I'd save the extra bucks over a standard pH meter and grab this guy from MoreBeer:

https://www.morebeer.com/products/easydens-anton-paar.html

Might need to get a few extra phones with all the blue tooth connected toys there are for brewing, blue tooth connected brewing system, water chemistry kit, pH meter, ABV/gravity readings...Just need one for DO and one for yeast cell counts.

Offline mabrungard

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2807
  • Water matters!
    • Bru'n Water
Re: I think I have to have this....
« Reply #2 on: August 15, 2017, 09:31:33 pm »
I can report that it is a very nice instrument. Hanna gave me one to test and it performs very well. The integration with IOS is perfect. It is still a little pricey for most homebrewers, but does what its supposed to.
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://www.brunwater.com/

Like Bru'n Water on Facebook
https://www.facebook.com/Brun-Water-464551136933908/?ref=bookmarks

Offline sn00ky

  • 1st Kit
  • *
  • Posts: 13
Re: I think I have to have this....
« Reply #3 on: August 15, 2017, 09:55:00 pm »
Can't help but think, compression fitting t'd into the Herms in line ....I like gizmos

Sent from my SM-G870W using Tapatalk


Offline ethinson

  • Brewmaster
  • *****
  • Posts: 561
  • Why is the beer always gone?
    • River Pirate Brewing Co.
Re: I think I have to have this....
« Reply #4 on: August 16, 2017, 11:52:11 am »
$225 is not as expensive as I would have thought for "how can I afford it" level of lab equipment. 

Of course what I see is the glass probe and I know damn well I would break the thing.  pH Probes are finicky.
SE Portland - AKA Beervana
Captain and Chief Deck Swabber - River Pirate Brewing Co.
Certified BJCP Beer Judge
2015 Oregon Brew Crew Member of the Year

Offline 1beerbaron

  • 1st Kit
  • *
  • Posts: 11
Re: I think I have to have this....
« Reply #5 on: August 16, 2017, 02:26:58 pm »
So when the probe needs replaced do you have to replace the whole thing?

Offline mabrungard

  • I spend way too much time on the AHA forum
  • ********
  • Posts: 2807
  • Water matters!
    • Bru'n Water
Re: I think I have to have this....
« Reply #6 on: August 16, 2017, 02:28:13 pm »
So when the probe needs replaced do you have to replace the whole thing?

Yep. That's my largest concern with this otherwise very good product.
Martin B
Carmel, IN

BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://www.brunwater.com/

Like Bru'n Water on Facebook
https://www.facebook.com/Brun-Water-464551136933908/?ref=bookmarks

Offline udubdawg

  • Senior Brewmaster
  • ******
  • Posts: 1080
Re: I think I have to have this....
« Reply #7 on: August 16, 2017, 02:30:08 pm »
I think I'd save the extra bucks over a standard pH meter and grab this guy from MoreBeer:

https://www.morebeer.com/products/easydens-anton-paar.html

Might need to get a few extra phones with all the blue tooth connected toys there are for brewing, blue tooth connected brewing system, water chemistry kit, pH meter, ABV/gravity readings...Just need one for DO and one for yeast cell counts.

This was a prize for MeadMaker Of The Year this year.  I will not deny my jealousy.

Offline Bilsch

  • Assistant Brewer
  • ***
  • Posts: 225
Re: I think I have to have this....
« Reply #8 on: August 16, 2017, 04:58:04 pm »
I think I'd save the extra bucks over a standard pH meter and grab this guy from MoreBeer:
https://www.morebeer.com/products/easydens-anton-paar.html
Might need to get a few extra phones with all the blue tooth connected toys there are for brewing, blue tooth connected brewing system, water chemistry kit, pH meter, ABV/gravity readings...Just need one for DO and one for yeast cell counts.

For $400 less than the Anton-Paar.. I think I'd rather the Milwaukee MA871, which essentially does the same thing.
https://www.amazon.com/Milwaukee-Refractometer-Automatic-Compensation-Resolution/dp/B007Z4IN58

Offline blatz

  • Official Poobah of No Life. (I Got Ban Hammered by Drew)
  • *********
  • Posts: 3511
  • Paul Blatz - Jupiter, FL
Re: I think I have to have this....
« Reply #9 on: August 16, 2017, 06:19:50 pm »
I want one too;  have it bookmarked.

but then again, I rarely desire to check pH these days - sort of have everything dialed in with brunwater.
The happiest people don’t necessarily have the best of everything; they just make the best of everything they have.

BJCP National: F0281

Offline HoosierBrew

  • I must live here
  • **********
  • Posts: 13031
  • Indianapolis,IN
Re: I think I have to have this....
« Reply #10 on: August 16, 2017, 07:21:28 pm »
They are definitely nice. So many purchases........
Jon H.

Offline Horseflesh

  • 1st Kit
  • *
  • Posts: 7
Re: I think I have to have this....
« Reply #11 on: August 17, 2017, 01:48:48 am »
I assume that with a digital refractometer you still need to make use of a wort correction factor, right?

Someone needs to make a brewer-friendly version that lets you input a set of calibration data and automagically produces a corrected SG value.

Yes, I am lazy.

The Beerery

  • Guest
Re: I think I have to have this....
« Reply #12 on: August 17, 2017, 01:05:45 pm »
I assume that with a digital refractometer you still need to make use of a wort correction factor, right?

Someone needs to make a brewer-friendly version that lets you input a set of calibration data and automagically produces a corrected SG value.

Yes, I am lazy.

I have the refractometer. If alcohol is present, yes you do otherwise no you don't.

Offline narcout

  • Brewmaster General
  • *******
  • Posts: 2117
  • Los Angeles, CA
Re: I think I have to have this....
« Reply #13 on: August 17, 2017, 04:40:41 pm »
I don't really see the appeal.
Sometimes you just can't get enough - JAMC

Offline denny

  • Administrator
  • Retired with too much time on my hands
  • *****
  • Posts: 24774
  • Noti OR [1991.4, 287.6deg] AR
    • Dennybrew
Re: I think I have to have this....
« Reply #14 on: August 17, 2017, 04:59:45 pm »
I don't really see the appeal.

Just cool factor...I don't actually think it would be worth the price to me.
Life begins at 60.....1.060, that is!

www.dennybrew.com

The best, sharpest, funniest, weirdest and most knowledgable minds in home brewing contribute on the AHA forum. - Alewyfe

"The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts." - Bertrand Russell