Author Topic: Keezers  (Read 2057 times)

Offline bbritt67

  • 1st Kit
  • *
  • Posts: 3
    • View Profile
Keezers
« on: September 21, 2017, 02:05:33 PM »
I need some help figuring out what's happening with my keezer. A couple of months ago I noticed that I couldn't get beer to flow and discovered that keezer got too cold. Beer was frozen to a slush. I caught in time to save beer. I swapped temp controllers and that seemed to fix the problem. Wrong, it happened again a couple of weeks later. I swapped cords and outlets and it appeared to be working fine, but it happened again. I'm out of ideas. Any help would be greatly appreciated!

Offline Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6858
    • View Profile
Re: Keezers
« Reply #1 on: September 21, 2017, 02:23:55 PM »
What temp is your controller set to? Where is the probe place?

Offline bbritt67

  • 1st Kit
  • *
  • Posts: 3
    • View Profile
Re: Keezers
« Reply #2 on: September 21, 2017, 02:33:09 PM »
I have temp set at 40 with temp probe in the upper part of the keezer.

Offline Stevie

  • Official Poobah of No Life.
  • *
  • Posts: 6858
    • View Profile
Re: Keezers
« Reply #3 on: September 21, 2017, 02:35:49 PM »
I think the probe placement is the issue. Place it towards the bottom. I have mine attached to a can of soda and wrapped in foil to prevent cycling.

Offline bbritt67

  • 1st Kit
  • *
  • Posts: 3
    • View Profile
Re: Keezers
« Reply #4 on: September 21, 2017, 02:54:04 PM »
Thanks Steve, as soon as I saw your reply asking about temp probe placement, the light went on. Duh! I just reconnected everything and I think that may have been the issue. Thanks bunches! Cheers!